OID reference
1.3.6.1.4.1.16177.1.400.1.3.3.3
Writing **reset(1)** to this parameter will reset all logged warning and errors of the system. The device LEDs will indicate normal operating state after result. Applies to AP and STA.
Identification
{1 3 6 1 4 1 16177 1 400 1 3 3 3}
| Value | Name |
|---|---|
| 0 | nop |
| 1 | reset |
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.16177.1.400.1.3.3.3.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rpcSysErrorReset OBJECT-TYPE
SYNTAX INTEGER { nop(0), reset(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Writing **reset(1)** to this parameter will reset all logged
warning and errors of the system. The device LEDs will indicate
normal operating state after result.
Applies to AP and STA."
::= { rpcSystem 3 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Writing **reset(1)** to this parameter will reset all logged warning and errors of the system. The device LEDs will indicate normal operating state after result. Applies to AP and STA.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rpcSysErrorReset
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rpcSysErrorReset",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"nop",
"(",
"0",
")",
",",
"reset",
"(",
"1",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Writing **reset(1)** to this parameter will reset all logged warning and errors of the system. The device LEDs will indicate normal operating state after result. Applies to AP and STA.\"",
"::=",
"{",
"rpcSystem",
"3",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"nop",
0
],
[
"reset",
1
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Writing **reset(1)** to this parameter will reset all logged warning and errors of the system. The device LEDs will indicate normal operating state after result. Applies to AP and STA."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: WESTERMO-SW6-MIB
See published definition above
{'SNMPv2-TC': ['DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Counter32', 'IpAddress', 'Integer32', 'TimeTicks'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.16177.1.400.1.3.3.1 | rpcSysReboot | 0 | 0 | |
| 1.3.6.1.4.1.16177.1.400.1.3.3.2 | rpcSysFactoryReset | 0 | 0 | |
| 1.3.6.1.4.1.16177.1.400.1.3.3.4 | rpcSysKernelLogReset | 0 | 0 |