This object defines which Self Healing Ring (SHR) SDH ring is used:
Uni Directional or BiDirectional. The type of the ring
is defined according to the direction of traffic flow under
normal working conditions.
In Bi Directional ring, the duplex traffic is on the same path
and transverses the same set of nodes for both directions of transmission.
In Uni Directional ring, the duplex traffic travels over opposite path
(per direction) and all the node of the ring are involved.
For Uni Directional SHR Protection Switching (Single Ended Switching)
is controlled by one node of the SDH ring, and does not require a protocol.
For Bi Directional SHR Protection Switching (Dual Ended switching)
is controlled by some nodes of the ring and requires a protocol
Parsed from file Rad0485.MIB.txt
Company: None
Module: RAD-MIB
This object defines which Self Healing Ring (SHR) SDH ring is used:
Uni Directional or BiDirectional. The type of the ring
is defined according to the direction of traffic flow under
normal working conditions.
In Bi Directional ring, the duplex traffic is on the same path
and transverses the same set of nodes for both directions of transmission.
In Uni Directional ring, the duplex traffic travels over opposite path
(per direction) and all the node of the ring are involved.
For Uni Directional SHR Protection Switching (Single Ended Switching)
is controlled by one node of the SDH ring, and does not require a protocol.
For Bi Directional SHR Protection Switching (Dual Ended switching)
is controlled by some nodes of the ring and requires a protocol
Parsed from file RAD-MIB.mib
Module: RAD-MIB
Vendor: Rad Data Communications
Module: RAD-MIB (rad-mib.mib)
Type: TABULAR
Access: read-create
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
sysCRdnSwitchingMode OBJECT-TYPE SYNTAX INTEGER { notApplicable (1), biDirectional (2), uniDirectional (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines which Self Healing Ring (SHR) SDH ring is used: Uni Directional or BiDirectional. The type of the ring is defined according to the direction of traffic flow under normal working conditions. In Bi Directional ring, the duplex traffic is on the same path and transverses the same set of nodes for both directions of transmission. In Uni Directional ring, the duplex traffic travels over opposite path (per direction) and all the node of the ring are involved. For Uni Directional SHR Protection Switching (Single Ended Switching) is controlled by one node of the SDH ring, and does not require a protocol. For Bi Directional SHR Protection Switching (Dual Ended switching) is controlled by some nodes of the ring and requires a protocol" ::= { sysCRdnEntry 12 }
sysCRdnSwitchingMode OBJECT-TYPE SYNTAX INTEGER { notApplicable (1), biDirectional (2), uniDirectional (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines which Self Healing Ring (SHR) SDH ring is used: Uni Directional or BiDirectional. The type of the ring is defined according to the direction of traffic flow under normal working conditions. In Bi Directional ring, the duplex traffic is on the same path and transverses the same set of nodes for both directions of transmission. In Uni Directional ring, the duplex traffic travels over opposite path (per direction) and all the node of the ring are involved. For Uni Directional SHR Protection Switching (Single Ended Switching) is controlled by one node of the SDH ring, and does not require a protocol. For Bi Directional SHR Protection Switching (Dual Ended switching) is controlled by some nodes of the ring and requires a protocol" ::= { sysCRdnEntry 12 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164.3.3.1.6.3.1.1 | sysCRdnCnfgIdx | 0 | 0 | This object indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.2 | sysCRdnPrimeSlot | 0 | 0 | The slot number of the Primary card of Redundancy. The Primary card should be the card that user wishes to be the online card (us… |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.3 | sysCRdnPrimePort | 0 | 0 | The port number. For DXC: For external ports the convention used will be: - first two digits will be: (IO slot number+10) - last on… |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.4 | sysCRdnSecSlot | 0 | 0 | The slot number of the Secondary card of Redundancy matching the Primary slot. |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.5 | sysCRdnSecPort | 0 | 0 | The port number. For DXC: For external ports the convention used will be: - first two digits will be: (IO slot number+10) - last on… |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.6 | sysCRdnMode | 0 | 0 | Redundancy Mode. DXC supports: yCable(3), singleSlotProtection(6) and dualCableParallelTx(4) MP supports: dualCableAIS(2), yCabl… |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.7 | sysCRdnRecMode | 0 | 0 | Recovery Mode. This object determines if after recovery of the failed card/port it will become on-line again or not: auto - autom… |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.8 | sysCRdnRecTime | 0 | 0 | Redundancy Recovery Time (sec). After switching to the current online card, the next switch can be performed only after a minimum… |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.9 | sysCRdnHwSwFlip | 0 | 0 | HW or SW decision for Redundancy Flip. This object is applicable only for sysCRdnMode=singleSlotProtection. HW - decision is by I… |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.10 | sysCRdnRowStatus | 0 | 0 | This parameter allows NMS to create/delete entries of this table. The only possible supported RowStatus vaules are active (1) and… |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.11 | sysCRdnOnline | 0 | 0 | Status - who is the Online (current) Redundancy Slot/Port. This object shows only the Online Slot/Port regarding the Redundancy.… |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.13 | sysCRdnFlipUponEvent | 0 | 0 | This object allows user to define if Flip to the other port will be performed (or not), for certain possible events. Each event i… |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.14 | sysCRdnLosOrLofTime | 0 | 0 | sysCRdnLosOrLoftime |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.15 | sysCRdnEventsTimeWindow | 0 | 0 | This parameter determines the time window in which to count events to trigger protection switching. For Ipmux time is counted in … |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.16 | sysCRdnSequenceNumberThreshold | 0 | 0 | This parameter determines the number of Sequence Number errors that should occur in the time window in order to cause switching. |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.17 | sysCRdnBufferErrorsThreshold | 0 | 0 | This parameter determines the number of Buffer undeflow/ overflow events occured in the time window that cause switching. |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.18 | sysCRdnBuffUnderrunTime | 0 | 0 | This parameter determines how much time to wait before switching, after jitter buffer underrun. Switching occurs if no frame arri… |