If the mode is originate(1), Trimbridge initiates the backup procedure when the
main link fails. if the mode is answer(2), it expects that the bridge on the
other end of the link will initiate the backup procedure. Note that only one
bridge in a pair should be set to mode originate(1).
Parsed from file Rad0485.MIB.txt
Company: None
Module: RAD-MIB
If the mode is originate(1), Trimbridge initiates the backup procedure when the
main link fails. if the mode is answer(2), it expects that the bridge on the
other end of the link will initiate the backup procedure. Note that only one
bridge in a pair should be set to mode originate(1).
Parsed from file RAD-MIB.mib
Module: RAD-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
trimDialUpMode OBJECT-TYPE SYNTAX INTEGER { originate(1), answer(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If the mode is originate(1), Trimbridge initiates the backup procedure when the main link fails. if the mode is answer(2), it expects that the bridge on the other end of the link will initiate the backup procedure. Note that only one bridge in a pair should be set to mode originate(1). " ::= { trimBackup 4 }
trimDialUpMode OBJECT-TYPE SYNTAX INTEGER { originate(1), answer(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "If the mode is originate(1), Trimbridge initiates the backup procedure when the main link fails. if the mode is answer(2), it expects that the bridge on the other end of the link will initiate the backup procedure. Note that only one bridge in a pair should be set to mode originate(1). " ::= { trimBackup 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164.4.3.2.4.0 | trimDialUpMode | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164.4.3.2.1 | trimBackupState | 1 | 1 | If main - the bridge is connected via the main physical link. If backup - the automatic backup feature was enabled and the bridge… |
| 1.3.6.1.4.1.164.4.3.2.2 | trimDialUpStatus | 1 | 1 | This parameter controls the operation of dial-up backup function. If status is disable(2), dial-up backup will not be initiated … |
| 1.3.6.1.4.1.164.4.3.2.3 | trimBackLinkType | 1 | 1 | This variable specifies the type of the backup link. If the type is leased(2), Trimbridge will reroute traffic to the backup lin… |
| 1.3.6.1.4.1.164.4.3.2.5 | trimDialUpErrorThreshold | 1 | 1 | Error rate on main link at which Backup will be enabled. low - 1*10-5 medium - 5*10-4 high - 1*10-3 If none(1) is selected, th… |
| 1.3.6.1.4.1.164.4.3.2.6 | trimDialUpRedialTimeout | 1 | 1 | If an attempt to dial up failed for the specified time, a new redial attempt will be initiated. |
| 1.3.6.1.4.1.164.4.3.2.7 | trimDialUpRedialNum | 1 | 1 | This variable specifies the number of times to initiate the dial-up procedure. If the number of redials is set to zero (0), then… |
| 1.3.6.1.4.1.164.4.3.2.8 | trimBackUpConnectDelay | 1 | 1 | The connect delay defines the minimum time period that the link must be disconnected. |
| 1.3.6.1.4.1.164.4.3.2.9 | trimBackUpDisConnectDelay | 1 | 1 | The disconnect delay defines the delay between the last valid traffic trigger and link disconnection. |
| 1.3.6.1.4.1.164.4.3.2.10 | trimBackUpScheduleTable | 1 | 3 | This is a table that contains the reroute shedule for the backup link. The index is the day of the week, starting with 1 for Su… |
| 1.3.6.1.4.1.164.4.3.2.11 | trimBackUpDelayAfterFailure | 1 | 1 | This entry defines the delay between the last @@@@ |