other - none of the specified connectors
none - no connector.
Sources for this description
CircitorMIBdepotNetdisco MIB archive copiesRAD MIB copies (Observium Community)
OID reference
1.3.6.1.4.1.164.6.2.15.1.1.2
The connector of the port/interface. other - none of the specified connectors none - no connector.
Identification
{1 3 6 1 4 1 164 6 2 15 1 1 2}
Definitions may combine these properties differently.
Numbers refer to source variants above. “All” covers variants that define enumerated values: 1, 2, 3, 4, 5, 6, 7, 8. Notes below names come from selected MIB definitions.
| Value | Name and source notes | Source variants |
|---|---|---|
| 1 | other | All |
| 2 | v35 34 pin female | All |
| 3 | rs530 DB25 | All |
| 4 | x21 DB15 | All |
| 5 | bnc | All |
| 6 | utp RJ45 | All |
| 7 | aui | All |
| 8 | rs422 DB25 | All |
| 9 | crossUtp RJ45 | All |
| 10 | rj45 | All |
| 11 | v24 DB25 | All |
| 12 | g703 TB5 | All |
| 13 | termBlock3AndRj45 | All |
| 14 | terminalBlock3 | All |
| 15 | terminalBlock5 | All |
| 16 | terminalBlock7 | All |
| 17 | db25 | All |
| 18 | db15 | All |
| 19 | rj45ethernet | All |
| 20 | termBlock5AndRj45 | All |
| 21 | db9 | All |
| 22 | g703E1 BNC-RJ45-BNC | All |
| 23 | g703E1-LTU BNC-RJ45-BNC | All |
| 24 | sc sc optical | All |
| 25 | st st optical | All |
| 26 | stl | All |
| 27 | fc fc optical | All |
| 28 | tb5w Term-Block-5-Wire (for HCD) | All |
| 29 | termBlock6AndRj45 | All |
| 30 | ethBnc | All except 5 |
| 31 | scsi26 SCSI with 26 pins | All except 5 |
| 32 | eth4381 RJ45 with two embeded LEDs | All except 5 |
| 33 | twoBnc Two BNC | All except 5 |
| 34 | scsi50 SCSI with 50 pins | All except 5 |
| 35 | twoMiniBnc Two mini BNC | All except 5 |
| 36 | sf1 sf1=single fiber optical | All except 5 |
| 37 | terminalBlock4 | All except 5 |
| 38 | sf2 sf2=single fiber optical | All except 5 |
| 39 | db25Balanced DB25 Balanced | All except 3, 5 |
| 40 | v36 | All except 5 |
| 41 | block4W like in WR connector for Modems | All except 5 |
| 42 | iripRj45 | All except 3, 5 |
| 43 | irEthQRj45 | All except 3, 5 |
| 44 | iripBnc | All except 3, 5 |
| 45 | rs530WA rs530/IR that solves a wander problem for SDH network | All except 3, 5 |
| 46 | v35WA v35/IR that solves a wander problem for SDH network | All except 3, 5 |
| 47 | irEthQBnc | All except 3, 5 |
| 48 | v35Db25 V.35 with connector DB25 | All except 3, 5 |
| 49 | rj11 Used for FXS & FXO | All except 3, 5 |
| 50 | mtrj optical | All except 3, 5 |
| 51 | lc optical | All except 3, 5 |
| 52 | terminalBlock2 | All except 3, 5 |
| 53 | irEth10s100 IR-ETH 10/100 | All except 3, 5 |
| 54 | scsi68 SCSI 68 pins | All except 3, 5 |
| 55 | sf3 sf3=single fiber of sc optical | All except 3, 4, 5 |
| 56 | fcLH fc Long Haul | All except 3, 4, 5 |
| 57 | telco50 TELCO 50 | 1, 2, 6, 7 |
| 58 | telco64 TELCO 64 | 1, 2, 6, 7 |
| 59 | irEthQN | 1, 2, 6, 7 |
| 60 | terminalBlock6 | 1, 2, 6 |
| 61 | scLH sc Long Haul | 1, 2, 6 |
| 62 | stLH st Long Haul | 1, 2, 6 |
| 63 | lcLH lc Long Haul | 1, 2, 6 |
| 64 | sfpIn SFP module is installed (In container) | 1, 2, 6 |
| 65 | sfpOut SFP module is not installed (Out of container) | 1, 2, 6 |
| 66 | db44 DB44 (High Density D-type) | 1, 2, 6 |
| 67 | db62 DB62 (High Density D-type) | 1, 2, 6 |
| 68 | v24Db9 V.24 with connector DB9 | 1, 2, 6 |
| 69 | scsi40 SCSI 40 pins | 1, 2, 6 |
| 70 | sf1NineRow sf1 9-row | 1, 2, 6 |
| 71 | sf2NineRow sf2 9-row | 1, 2, 6 |
| 72 | sf3NineRow sf3 9-row | 1, 2, 6 |
| 73 | smartSerial26 QDC1113L (Cisco) | 1, 2, 6 |
| 74 | miniUsb5 | 1, 2, 6 |
| 75 | db26 DB26 (High Density D-Type) | 1, 2, 6 |
| 76 | comboUtpSfpIn UTP+SFP combo, SFP module is installed | 2, 6 |
| 77 | comboUtpSfpOut UTP+SFP combo, SFP module is not installed | 2, 6 |
| 78 | hiDensity160Pin CISCO High Density Connector with 160 Pins | 6 |
| 79 | xfpIn XFP module is installed (In container) | 6 |
| 80 | xfpOut XFP module is not installed (Out of container) | 6 |
| 81 | ssfpIn Smart SFP is installed | 6 |
| 82 | ssfpOut Smart SFP is not plugged-in | 6 |
| 83 | comboUtpSsfpIn Smart SFP is plugged-in on combo port | 6 |
| 84 | comboUtpSsfpOut Smart SFP is not plugged-in on combo port | 6 |
| 85 | scsi68DS Double Signaling SCSI 68 pins | 6 |
| 86 | miniBnc mini BNC Connector | 6 |
| 87 | sMA GPS Connector | 6 |
| 88 | rj45Shdsl8w rj45Shdsl8w | 6 |
| 89 | miniBncAndRj45 Mini BNC & RJ45 Connectors (used for 1pps or EXT CLK) | 6 |
| 90 | sfpPlusIn SFP+ module is installed (In container) | 6 |
| 91 | sfpPlusOut SFP+ module is not installed (Out of container) | 6 |
| 255 | none | All |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In OPTIMUX-MIB, the row index portIdx is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.164.6.2.15.1.1.2.<portIdx>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.164.6.2.15.1.1.2
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 8 distinct definitions; some records may not include a definition.
physicalConnector OBJECT-TYPE
SYNTAX INTEGER
{
other (1),
v35 (2), --34 pin female
rs530 (3), --DB25
x21 (4), --DB15
bnc (5),
utp (6), --RJ45
aui (7),
rs422 (8), --DB25
crossUtp (9), --RJ45
rj45 (10),
v24 (11), --DB25
g703 (12), --TB5
termBlock3AndRj45 (13),
terminalBlock3 (14),
terminalBlock5 (15),
terminalBlock7 (16),
db25 (17),
db15 (18),
rj45ethernet (19),
termBlock5AndRj45 (20),
db9 (21),
g703E1 (22), --BNC-RJ45-BNC
g703E1-LTU (23), --BNC-RJ45-BNC
sc (24), --sc optical
st (25), --st optical
stl (26),
fc (27), --fc optical
tb5w (28), --Term-Block-5-Wire (for HCD)
termBlock6AndRj45 (29),
ethBnc (30),
scsi26 (31), --SCSI with 26 pins
eth4381 (32), --RJ45 with two embeded LEDs
twoBnc (33), --Two BNC
scsi50 (34), --SCSI with 50 pins
twoMiniBnc (35), --Two mini BNC
sf1 (36), --sf1=single fiber optical
terminalBlock4 (37),
sf2 (38), --sf2=single fiber optical
db25Balanced (39), --DB25 Balanced
v36 (40),
block4W (41), --like in WR connector for Modems
iripRj45 (42),
irEthQRj45 (43),
iripBnc (44),
rs530WA (45), --rs530/IR that solves a wander problem for SDH network
v35WA (46), --v35/IR that solves a wander problem for SDH network
irEthQBnc (47),
v35Db25 (48), --V.35 with connector DB25
rj11 (49), --Used for FXS & FXO
mtrj (50), --optical
lc (51), --optical
terminalBlock2 (52),
irEth10s100 (53), --IR-ETH 10/100
scsi68 (54), -- SCSI 68 pins
sf3 (55), -- sf3=single fiber of sc optical
fcLH (56), -- fc Long Haul
telco50 (57), -- TELCO 50
telco64 (58), -- TELCO 64
irEthQN (59),
terminalBlock6 (60),
scLH (61), -- sc Long Haul
stLH (62), -- st Long Haul
lcLH (63), -- lc Long Haul
sfpIn (64), -- SFP module is installed (In container)
sfpOut (65), -- SFP module is not installed (Out of container)
db44 (66), -- DB44 (High Density D-type)
db62 (67), -- DB62 (High Density D-type)
v24Db9 (68), -- V.24 with connector DB9
scsi40 (69), -- SCSI 40 pins
sf1NineRow (70), -- sf1 9-row
sf2NineRow (71), -- sf2 9-row
sf3NineRow (72), -- sf3 9-row
smartSerial26 (73), -- QDC1113L (Cisco)
miniUsb5 (74),
db26 (75), -- DB26 (High Density D-Type)
none (255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The connector of the port/interface.
other - none of the specified connectors
none - no connector."
::= { physicalConnectorEntry 2 }physicalConnector OBJECT-TYPE
SYNTAX INTEGER
{
other (1),
v35 (2), --34 pin female
rs530 (3), --DB25
x21 (4), --DB15
bnc (5),
utp (6), --RJ45
aui (7),
rs422 (8), --DB25
crossUtp (9), --RJ45
rj45 (10),
v24 (11), --DB25
g703 (12), --TB5
termBlock3AndRj45 (13),
terminalBlock3 (14),
terminalBlock5 (15),
terminalBlock7 (16),
db25 (17),
db15 (18),
rj45ethernet (19),
termBlock5AndRj45 (20),
db9 (21),
g703E1 (22), --BNC-RJ45-BNC
g703E1-LTU (23), --BNC-RJ45-BNC
sc (24), --sc optical
st (25), --st optical
stl (26),
fc (27), --fc optical
tb5w (28), --Term-Block-5-Wire (for HCD)
termBlock6AndRj45 (29),
ethBnc (30),
scsi26 (31), --SCSI with 26 pins
eth4381 (32), --RJ45 with two embeded LEDs
twoBnc (33), --Two BNC
scsi50 (34), --SCSI with 50 pins
twoMiniBnc (35), --Two mini BNC
sf1 (36), --sf1=single fiber optical
terminalBlock4 (37),
sf2 (38), --sf2=single fiber optical
db25Balanced (39), --DB25 Balanced
v36 (40),
block4W (41), --like in WR connector for Modems
iripRj45 (42),
irEthQRj45 (43),
iripBnc (44),
rs530WA (45), --rs530/IR that solves a wander problem for SDH network
v35WA (46), --v35/IR that solves a wander problem for SDH network
irEthQBnc (47),
v35Db25 (48), --V.35 with connector DB25
rj11 (49), --Used for FXS & FXO
mtrj (50), --optical
lc (51), --optical
terminalBlock2 (52),
irEth10s100 (53), --IR-ETH 10/100
scsi68 (54), -- SCSI 68 pins
sf3 (55), -- sf3=single fiber of sc optical
fcLH (56), -- fc Long Haul
telco50 (57), -- TELCO 50
telco64 (58), -- TELCO 64
irEthQN (59),
terminalBlock6 (60),
scLH (61), -- sc Long Haul
stLH (62), -- st Long Haul
lcLH (63), -- lc Long Haul
sfpIn (64), -- SFP module is installed (In container)
sfpOut (65), -- SFP module is not installed (Out of container)
db44 (66), -- DB44 (High Density D-type)
db62 (67), -- DB62 (High Density D-type)
v24Db9 (68), -- V.24 with connector DB9
scsi40 (69), -- SCSI 40 pins
sf1NineRow (70), -- sf1 9-row
sf2NineRow (71), -- sf2 9-row
sf3NineRow (72), -- sf3 9-row
smartSerial26 (73), -- QDC1113L (Cisco)
miniUsb5 (74),
db26 (75), -- DB26 (High Density D-Type)
comboUtpSfpIn (76), -- UTP+SFP combo, SFP module is installed
comboUtpSfpOut (77), -- UTP+SFP combo, SFP module is not installed
none (255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The connector of the port/interface.
other - none of the specified connectors
none - no connector."
::= { physicalConnectorEntry 2 }physicalConnector OBJECT-TYPE
SYNTAX INTEGER
{
other (1),
v35 (2), --34 pin female
rs530 (3), --DB25
x21 (4), --DB15
bnc (5),
utp (6), --RJ45
aui (7),
rs422 (8), --DB25
crossUtp (9), --RJ45
rj45 (10),
v24 (11), --DB25
g703 (12), --TB5
termBlock3AndRj45 (13),
terminalBlock3 (14),
terminalBlock5 (15),
terminalBlock7 (16),
db25 (17),
db15 (18),
rj45ethernet (19),
termBlock5AndRj45 (20),
db9 (21),
g703E1 (22), --BNC-RJ45-BNC
g703E1-LTU (23), --BNC-RJ45-BNC
sc (24), --sc optical
st (25), --st optical
stl (26),
fc (27), --fc optical
tb5w (28), --Term-Block-5-Wire (for HCD)
termBlock6AndRj45 (29),
ethBnc (30),
scsi26 (31), --SCSI with 26 pins
eth4381 (32), --RJ45 with two embeded LEDs
twoBnc (33), --Two BNC
scsi50 (34), --SCSI with 50 pins
twoMiniBnc (35), --Two mini BNC
sf1 (36), --sf1=single fiber optical
terminalBlock4 (37),
sf2 (38), --sf2=single fiber optical
-- 39 is reserved for the next version: ver455
v36 (40),
block4W (41), --like in WR connector for Modems
none (255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The connector of the port/interface.
other - none of the specified connectors
none - no connector."
::= { physicalConnectorEntry 2 }physicalConnector OBJECT-TYPE
SYNTAX INTEGER
{
other (1),
v35 (2), --34 pin female
rs530 (3), --DB25
x21 (4), --DB15
bnc (5),
utp (6), --RJ45
aui (7),
rs422 (8), --DB25
crossUtp (9), --RJ45
rj45 (10),
v24 (11), --DB25
g703 (12), --TB5
termBlock3AndRj45 (13),
terminalBlock3 (14),
terminalBlock5 (15),
terminalBlock7 (16),
db25 (17),
db15 (18),
rj45ethernet (19),
termBlock5AndRj45 (20),
db9 (21),
g703E1 (22), --BNC-RJ45-BNC
g703E1-LTU (23), --BNC-RJ45-BNC
sc (24), --sc optical
st (25), --st optical
stl (26),
fc (27), --fc optical
tb5w (28), --Term-Block-5-Wire (for HCD)
termBlock6AndRj45 (29),
ethBnc (30),
scsi26 (31), --SCSI with 26 pins
eth4381 (32), --RJ45 with two embeded LEDs
twoBnc (33), --Two BNC
scsi50 (34), --SCSI with 50 pins
twoMiniBnc (35), --Two mini BNC
sf1 (36), --sf1=single fiber optical
terminalBlock4 (37),
sf2 (38), --sf2=single fiber optical
db25Balanced (39), --DB25 Balanced
v36 (40),
block4W (41), --like in WR connector for Modems
iripRj45 (42),
irEthQRj45 (43),
iripBnc (44),
rs530WA (45), --rs530/IR that solves a wander problem for SDH network
v35WA (46), --v35/IR that solves a wander problem for SDH network
irEthQBnc (47),
v35Db25 (48), --V.35 with connector DB25
rj11 (49), --Used for FXS & FXO
mtrj (50), --optical
lc (51), --optical
terminalBlock2 (52),
irEth10s100 (53), --IR-ETH 10/100
scsi68 (54), -- SCSI 68 pins
none (255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The connector of the port/interface.
other - none of the specified connectors
none - no connector."
::= { physicalConnectorEntry 2 }physicalConnector OBJECT-TYPE
SYNTAX INTEGER
{
other (1),
v35 (2), --34 pin female
rs530 (3), --DB25
x21 (4), --DB15
bnc (5),
utp (6), --RJ45
aui (7),
rs422 (8), --DB25
crossUtp (9), --RJ45
rj45 (10),
v24 (11), --DB25
g703 (12), --TB5
termBlock3AndRj45 (13),
terminalBlock3 (14),
terminalBlock5 (15),
terminalBlock7 (16),
db25 (17),
db15 (18),
rj45ethernet (19),
termBlock5AndRj45 (20),
db9 (21),
g703E1 (22), --BNC-RJ45-BNC
g703E1-LTU (23), --BNC-RJ45-BNC
sc (24), --sc optical
st (25), --st optical
stl (26),
fc (27), --fc optical
tb5w (28), --Term-Block-5-Wire (for HCD)
termBlock6AndRj45 (29),
none (255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The connector of the port/interface.
other - none of the specified connectors
none - no connector."
::= { physicalConnectorEntry 2 }physicalConnector OBJECT-TYPE
SYNTAX INTEGER
{
other (1),
v35 (2), --34 pin female
rs530 (3), --DB25
x21 (4), --DB15
bnc (5),
utp (6), --RJ45
aui (7),
rs422 (8), --DB25
crossUtp (9), --RJ45
rj45 (10),
v24 (11), --DB25
g703 (12), --TB5
termBlock3AndRj45 (13),
terminalBlock3 (14),
terminalBlock5 (15),
terminalBlock7 (16),
db25 (17),
db15 (18),
rj45ethernet (19),
termBlock5AndRj45 (20),
db9 (21),
g703E1 (22), --BNC-RJ45-BNC
g703E1-LTU (23), --BNC-RJ45-BNC
sc (24), --sc optical
st (25), --st optical
stl (26),
fc (27), --fc optical
tb5w (28), --Term-Block-5-Wire (for HCD)
termBlock6AndRj45 (29),
none (255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The connector of the port/interface.
other - none of the specified connectors
none - no connector."
::= { physicalConnectorEntry 2 }physicalConnector OBJECT-TYPE
SYNTAX INTEGER {
other (1),
v35 (2), --34 pin female
rs530 (3), --DB25
x21 (4), --DB15
bnc (5),
utp (6), --RJ45
aui (7),
rs422 (8), --DB25
crossUtp (9), --RJ45
rj45 (10),
v24 (11), --DB25
g703 (12), --TB5
termBlock3AndRj45 (13),
terminalBlock3 (14),
terminalBlock5 (15),
terminalBlock7 (16),
db25 (17),
db15 (18),
rj45ethernet (19),
termBlock5AndRj45 (20),
db9 (21),
g703E1 (22), --BNC-RJ45-BNC
g703E1-LTU (23), --BNC-RJ45-BNC
sc (24), --sc optical
st (25), --st optical
stl (26),
fc (27), --fc optical
tb5w (28), --Term-Block-5-Wire (for HCD)
termBlock6AndRj45 (29),
ethBnc (30),
scsi26 (31), --SCSI with 26 pins
eth4381 (32), --RJ45 with two embeded LEDs
twoBnc (33), --Two BNC
scsi50 (34), --SCSI with 50 pins
twoMiniBnc (35), --Two mini BNC
sf1 (36), --sf1=single fiber optical
terminalBlock4 (37),
sf2 (38), --sf2=single fiber optical
db25Balanced (39), --DB25 Balanced
v36 (40),
block4W (41), --like in WR connector for Modems
iripRj45 (42),
irEthQRj45 (43),
iripBnc (44),
rs530WA (45), --rs530/IR that solves a wander problem for SDH network
v35WA (46), --v35/IR that solves a wander problem for SDH network
irEthQBnc (47),
v35Db25 (48), --V.35 with connector DB25
rj11 (49), --Used for FXS & FXO
mtrj (50), --optical
lc (51), --optical
terminalBlock2 (52),
irEth10s100 (53), --IR-ETH 10/100
scsi68 (54), -- SCSI 68 pins
sf3 (55), -- sf3=single fiber of sc optical
fcLH (56), -- fc Long Haul
telco50 (57), -- TELCO 50
telco64 (58), -- TELCO 64
irEthQN (59),
terminalBlock6 (60),
scLH (61), -- sc Long Haul
stLH (62), -- st Long Haul
lcLH (63), -- lc Long Haul
sfpIn (64), -- SFP module is installed (In container)
sfpOut (65), -- SFP module is not installed (Out of container)
db44 (66), -- DB44 (High Density D-type)
db62 (67), -- DB62 (High Density D-type)
v24Db9 (68), -- V.24 with connector DB9
scsi40 (69), -- SCSI 40 pins
sf1NineRow (70), -- sf1 9-row
sf2NineRow (71), -- sf2 9-row
sf3NineRow (72), -- sf3 9-row
smartSerial26 (73), -- QDC1113L (Cisco)
miniUsb5 (74),
db26 (75), -- DB26 (High Density D-Type)
comboUtpSfpIn (76), -- UTP+SFP combo, SFP module is installed
comboUtpSfpOut (77), -- UTP+SFP combo, SFP module is not installed
hiDensity160Pin (78), -- CISCO High Density Connector with 160 Pins
xfpIn (79), -- XFP module is installed (In container)
xfpOut (80), -- XFP module is not installed (Out of container)
ssfpIn (81), -- Smart SFP is installed
ssfpOut (82), -- Smart SFP is not plugged-in
comboUtpSsfpIn (83), -- Smart SFP is plugged-in on combo port
comboUtpSsfpOut (84), -- Smart SFP is not plugged-in on combo port
scsi68DS (85), -- Double Signaling SCSI 68 pins
miniBnc (86), -- mini BNC Connector
sMA (87), -- GPS Connector
rj45Shdsl8w (88), -- rj45Shdsl8w
miniBncAndRj45 (89), -- Mini BNC & RJ45 Connectors (used for 1pps or EXT CLK)
sfpPlusIn (90), -- SFP+ module is installed (In container)
sfpPlusOut (91), -- SFP+ module is not installed (Out of container)
none (255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The connector of the port/interface.
other - none of the specified connectors
none - no connector."
::= { physicalConnectorEntry 2 }physicalConnector OBJECT-TYPE
SYNTAX INTEGER
{
other (1),
v35 (2), --34 pin female
rs530 (3), --DB25
x21 (4), --DB15
bnc (5),
utp (6), --RJ45
aui (7),
rs422 (8), --DB25
crossUtp (9), --RJ45
rj45 (10),
v24 (11), --DB25
g703 (12), --TB5
termBlock3AndRj45 (13),
terminalBlock3 (14),
terminalBlock5 (15),
terminalBlock7 (16),
db25 (17),
db15 (18),
rj45ethernet (19),
termBlock5AndRj45 (20),
db9 (21),
g703E1 (22), --BNC-RJ45-BNC
g703E1-LTU (23), --BNC-RJ45-BNC
sc (24), --sc optical
st (25), --st optical
stl (26),
fc (27), --fc optical
tb5w (28), --Term-Block-5-Wire (for HCD)
termBlock6AndRj45 (29),
ethBnc (30),
scsi26 (31), --SCSI with 26 pins
eth4381 (32), --RJ45 with two embeded LEDs
twoBnc (33), --Two BNC
scsi50 (34), --SCSI with 50 pins
twoMiniBnc (35), --Two mini BNC
sf1 (36), --sf1=single fiber optical
terminalBlock4 (37),
sf2 (38), --sf2=single fiber optical
db25Balanced (39), --DB25 Balanced
v36 (40),
block4W (41), --like in WR connector for Modems
iripRj45 (42),
irEthQRj45 (43),
iripBnc (44),
rs530WA (45), --rs530/IR that solves a wander problem for SDH network
v35WA (46), --v35/IR that solves a wander problem for SDH network
irEthQBnc (47),
v35Db25 (48), --V.35 with connector DB25
rj11 (49), --Used for FXS & FXO
mtrj (50), --optical
lc (51), --optical
terminalBlock2 (52),
irEth10s100 (53), --IR-ETH 10/100
scsi68 (54), -- SCSI 68 pins
sf3 (55), -- sf3=single fiber of sc optical
fcLH (56), -- fc Long Haul
telco50 (57), -- TELCO 50
telco64 (58), -- TELCO 64
irEthQN (59),
none (255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The connector of the port/interface.
other - none of the specified connectors
none - no connector."
::= { physicalConnectorEntry 2 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
CircitorMIBdepotNetdisco MIB archive copiesRAD MIB copies (Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: physicalConnector
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"physicalConnector",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"other",
"(",
"1",
")",
",",
"v35",
"(",
"2",
")",
",",
"rs530",
"(",
"3",
")",
",",
"x21",
"(",
"4",
")",
",",
"bnc",
"(",
"5",
")",
",",
"utp",
"(",
"6",
")",
",",
"aui",
"(",
"7",
")",
",",
"rs422",
"(",
"8",
")",
",",
"crossUtp",
"(",
"9",
")",
",",
"rj45",
"(",
"10",
")",
",",
"v24",
"(",
"11",
")",
",",
"g703",
"(",
"12",
")",
",",
"termBlock3AndRj45",
"(",
"13",
")",
",",
"terminalBlock3",
"(",
"14",
")",
",",
"terminalBlock5",
"(",
"15",
")",
",",
"terminalBlock7",
"(",
"16",
")",
",",
"db25",
"(",
"17",
")",
",",
"db15",
"(",
"18",
")",
",",
"rj45ethernet",
"(",
"19",
")",
",",
"termBlock5AndRj45",
"(",
"20",
")",
",",
"db9",
"(",
"21",
")",
",",
"g703E1",
"(",
"22",
")",
",",
"g703E1-LTU",
"(",
"23",
")",
",",
"sc",
"(",
"24",
")",
",",
"st",
"(",
"25",
")",
",",
"stl",
"(",
"26",
")",
",",
"fc",
"(",
"27",
")",
",",
"tb5w",
"(",
"28",
")",
",",
"termBlock6AndRj45",
"(",
"29",
")",
",",
"ethBnc",
"(",
"30",
")",
",",
"scsi26",
"(",
"31",
")",
",",
"eth4381",
"(",
"32",
")",
",",
"twoBnc",
"(",
"33",
")",
",",
"scsi50",
"(",
"34",
")",
",",
"twoMiniBnc",
"(",
"35",
")",
",",
"sf1",
"(",
"36",
")",
",",
"terminalBlock4",
"(",
"37",
")",
",",
"sf2",
"(",
"38",
")",
",",
"db25Balanced",
"(",
"39",
")",
",",
"v36",
"(",
"40",
")",
",",
"block4W",
"(",
"41",
")",
",",
"iripRj45",
"(",
"42",
")",
",",
"irEthQRj45",
"(",
"43",
")",
",",
"iripBnc",
"(",
"44",
")",
",",
"rs530WA",
"(",
"45",
")",
",",
"v35WA",
"(",
"46",
")",
",",
"irEthQBnc",
"(",
"47",
")",
",",
"v35Db25",
"(",
"48",
")",
",",
"rj11",
"(",
"49",
")",
",",
"mtrj",
"(",
"50",
")",
",",
"lc",
"(",
"51",
")",
",",
"terminalBlock2",
"(",
"52",
")",
",",
"irEth10s100",
"(",
"53",
")",
",",
"scsi68",
"(",
"54",
")",
",",
"sf3",
"(",
"55",
")",
",",
"fcLH",
"(",
"56",
")",
",",
"telco50",
"(",
"57",
")",
",",
"telco64",
"(",
"58",
")",
",",
"irEthQN",
"(",
"59",
")",
",",
"terminalBlock6",
"(",
"60",
")",
",",
"scLH",
"(",
"61",
")",
",",
"stLH",
"(",
"62",
")",
",",
"lcLH",
"(",
"63",
")",
",",
"sfpIn",
"(",
"64",
")",
",",
"sfpOut",
"(",
"65",
")",
",",
"db44",
"(",
"66",
")",
",",
"db62",
"(",
"67",
")",
",",
"v24Db9",
"(",
"68",
")",
",",
"scsi40",
"(",
"69",
")",
",",
"sf1NineRow",
"(",
"70",
")",
",",
"sf2NineRow",
"(",
"71",
")",
",",
"sf3NineRow",
"(",
"72",
")",
",",
"smartSerial26",
"(",
"73",
")",
",",
"miniUsb5",
"(",
"74",
")",
",",
"db26",
"(",
"75",
")",
",",
"none",
"(",
"255",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The connector of the port/interface. other - none of the specified connectors none - no connector.\"",
"::=",
"{",
"physicalConnectorEntry",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"other",
1
],
[
"v35",
2
],
[
"rs530",
3
],
[
"x21",
4
],
[
"bnc",
5
],
[
"utp",
6
],
[
"aui",
7
],
[
"rs422",
8
],
[
"crossUtp",
9
],
[
"rj45",
10
],
[
"v24",
11
],
[
"g703",
12
],
[
"termBlock3AndRj45",
13
],
[
"terminalBlock3",
14
],
[
"terminalBlock5",
15
],
[
"terminalBlock7",
16
],
[
"db25",
17
],
[
"db15",
18
],
[
"rj45ethernet",
19
],
[
"termBlock5AndRj45",
20
],
[
"db9",
21
],
[
"g703E1",
22
],
[
"g703E1-LTU",
23
],
[
"sc",
24
],
[
"st",
25
],
[
"stl",
26
],
[
"fc",
27
],
[
"tb5w",
28
],
[
"termBlock6AndRj45",
29
],
[
"ethBnc",
30
],
[
"scsi26",
31
],
[
"eth4381",
32
],
[
"twoBnc",
33
],
[
"scsi50",
34
],
[
"twoMiniBnc",
35
],
[
"sf1",
36
],
[
"terminalBlock4",
37
],
[
"sf2",
38
],
[
"db25Balanced",
39
],
[
"v36",
40
],
[
"block4W",
41
],
[
"iripRj45",
42
],
[
"irEthQRj45",
43
],
[
"iripBnc",
44
],
[
"rs530WA",
45
],
[
"v35WA",
46
],
[
"irEthQBnc",
47
],
[
"v35Db25",
48
],
[
"rj11",
49
],
[
"mtrj",
50
],
[
"lc",
51
],
[
"terminalBlock2",
52
],
[
"irEth10s100",
53
],
[
"scsi68",
54
],
[
"sf3",
55
],
[
"fcLH",
56
],
[
"telco50",
57
],
[
"telco64",
58
],
[
"irEthQN",
59
],
[
"terminalBlock6",
60
],
[
"scLH",
61
],
[
"stLH",
62
],
[
"lcLH",
63
],
[
"sfpIn",
64
],
[
"sfpOut",
65
],
[
"db44",
66
],
[
"db62",
67
],
[
"v24Db9",
68
],
[
"scsi40",
69
],
[
"sf1NineRow",
70
],
[
"sf2NineRow",
71
],
[
"sf3NineRow",
72
],
[
"smartSerial26",
73
],
[
"miniUsb5",
74
],
[
"db26",
75
],
[
"none",
255
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The connector of the port/interface. other - none of the specified connectors none - no connector."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Netdisco archive.
Module: RAD-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifAlias', 'ifIndex', 'ifDescr'], 'ATM-MIB': ['atmVplVpi', 'atmVclVpi', 'atmVclVci', 'atmVpCrossConnectEntry', 'atmVcCrossConnectEntry', 'atmTrafficDescrParamEntry'], 'DS1-MIB': ['dsx1CurrentIndex', 'dsx1IntervalIndex', 'dsx1IntervalNumber', 'dsx1LineIndex', 'dsx1TotalIndex', 'dsx1LineStatus', 'dsx1LineStatusLastChange', 'dsx1LoopbackStatus'], 'DS3-MIB': ['dsx3LineStatus', 'dsx3LoopbackStatus', 'dsx3ConfigEntry'], 'LLDP-MIB': ['LldpPortIdSubtype'], 'SNMPv2-TC': ['RowStatus', 'DateAndTime', 'TimeStamp', 'TEXTUAL-CONVENTION', 'DisplayString', 'MacAddress', 'RowPointer', 'TruthValue'], 'BRIDGE-MIB': ['Timeout', 'BridgeId', 'dot1dBasePortEntry'], 'SNMPv2-SMI': ['TimeTicks', 'enterprises', 'IpAddress', 'OBJECT-TYPE', 'Integer32', 'Counter32', 'Gauge32', 'OBJECT-IDENTITY', 'NOTIFICATION-TYPE', 'Unsigned32', 'Counter64'], 'DOT3-OAM-MIB': ['dot3OamEntry', 'dot3OamOperStatus'], 'Q-BRIDGE-MIB': ['VlanId', 'PortList', 'dot1qVlanStaticEntry'], 'IANAifType-MIB': ['IANAifType'], 'PerfHist-TC-MIB': ['PerfCurrentCount', 'PerfIntervalCount', 'PerfTotalCount'], 'IEEE8021-CFM-MIB': ['dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'DISMAN-SCHEDULE-MIB': ['schedEntry']}Related source files and packages:
Status in source: current.
Names: physicalConnector
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"physicalConnector",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"other",
"(",
"1",
")",
",",
"v35",
"(",
"2",
")",
",",
"rs530",
"(",
"3",
")",
",",
"x21",
"(",
"4",
")",
",",
"bnc",
"(",
"5",
")",
",",
"utp",
"(",
"6",
")",
",",
"aui",
"(",
"7",
")",
",",
"rs422",
"(",
"8",
")",
",",
"crossUtp",
"(",
"9",
")",
",",
"rj45",
"(",
"10",
")",
",",
"v24",
"(",
"11",
")",
",",
"g703",
"(",
"12",
")",
",",
"termBlock3AndRj45",
"(",
"13",
")",
",",
"terminalBlock3",
"(",
"14",
")",
",",
"terminalBlock5",
"(",
"15",
")",
",",
"terminalBlock7",
"(",
"16",
")",
",",
"db25",
"(",
"17",
")",
",",
"db15",
"(",
"18",
")",
",",
"rj45ethernet",
"(",
"19",
")",
",",
"termBlock5AndRj45",
"(",
"20",
")",
",",
"db9",
"(",
"21",
")",
",",
"g703E1",
"(",
"22",
")",
",",
"g703E1-LTU",
"(",
"23",
")",
",",
"sc",
"(",
"24",
")",
",",
"st",
"(",
"25",
")",
",",
"stl",
"(",
"26",
")",
",",
"fc",
"(",
"27",
")",
",",
"tb5w",
"(",
"28",
")",
",",
"termBlock6AndRj45",
"(",
"29",
")",
",",
"ethBnc",
"(",
"30",
")",
",",
"scsi26",
"(",
"31",
")",
",",
"eth4381",
"(",
"32",
")",
",",
"twoBnc",
"(",
"33",
")",
",",
"scsi50",
"(",
"34",
")",
",",
"twoMiniBnc",
"(",
"35",
")",
",",
"sf1",
"(",
"36",
")",
",",
"terminalBlock4",
"(",
"37",
")",
",",
"sf2",
"(",
"38",
")",
",",
"db25Balanced",
"(",
"39",
")",
",",
"v36",
"(",
"40",
")",
",",
"block4W",
"(",
"41",
")",
",",
"iripRj45",
"(",
"42",
")",
",",
"irEthQRj45",
"(",
"43",
")",
",",
"iripBnc",
"(",
"44",
")",
",",
"rs530WA",
"(",
"45",
")",
",",
"v35WA",
"(",
"46",
")",
",",
"irEthQBnc",
"(",
"47",
")",
",",
"v35Db25",
"(",
"48",
")",
",",
"rj11",
"(",
"49",
")",
",",
"mtrj",
"(",
"50",
")",
",",
"lc",
"(",
"51",
")",
",",
"terminalBlock2",
"(",
"52",
")",
",",
"irEth10s100",
"(",
"53",
")",
",",
"scsi68",
"(",
"54",
")",
",",
"sf3",
"(",
"55",
")",
",",
"fcLH",
"(",
"56",
")",
",",
"telco50",
"(",
"57",
")",
",",
"telco64",
"(",
"58",
")",
",",
"irEthQN",
"(",
"59",
")",
",",
"terminalBlock6",
"(",
"60",
")",
",",
"scLH",
"(",
"61",
")",
",",
"stLH",
"(",
"62",
")",
",",
"lcLH",
"(",
"63",
")",
",",
"sfpIn",
"(",
"64",
")",
",",
"sfpOut",
"(",
"65",
")",
",",
"db44",
"(",
"66",
")",
",",
"db62",
"(",
"67",
")",
",",
"v24Db9",
"(",
"68",
")",
",",
"scsi40",
"(",
"69",
")",
",",
"sf1NineRow",
"(",
"70",
")",
",",
"sf2NineRow",
"(",
"71",
")",
",",
"sf3NineRow",
"(",
"72",
")",
",",
"smartSerial26",
"(",
"73",
")",
",",
"miniUsb5",
"(",
"74",
")",
",",
"db26",
"(",
"75",
")",
",",
"comboUtpSfpIn",
"(",
"76",
")",
",",
"comboUtpSfpOut",
"(",
"77",
")",
",",
"none",
"(",
"255",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The connector of the port/interface. other - none of the specified connectors none - no connector.\"",
"::=",
"{",
"physicalConnectorEntry",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"other",
1
],
[
"v35",
2
],
[
"rs530",
3
],
[
"x21",
4
],
[
"bnc",
5
],
[
"utp",
6
],
[
"aui",
7
],
[
"rs422",
8
],
[
"crossUtp",
9
],
[
"rj45",
10
],
[
"v24",
11
],
[
"g703",
12
],
[
"termBlock3AndRj45",
13
],
[
"terminalBlock3",
14
],
[
"terminalBlock5",
15
],
[
"terminalBlock7",
16
],
[
"db25",
17
],
[
"db15",
18
],
[
"rj45ethernet",
19
],
[
"termBlock5AndRj45",
20
],
[
"db9",
21
],
[
"g703E1",
22
],
[
"g703E1-LTU",
23
],
[
"sc",
24
],
[
"st",
25
],
[
"stl",
26
],
[
"fc",
27
],
[
"tb5w",
28
],
[
"termBlock6AndRj45",
29
],
[
"ethBnc",
30
],
[
"scsi26",
31
],
[
"eth4381",
32
],
[
"twoBnc",
33
],
[
"scsi50",
34
],
[
"twoMiniBnc",
35
],
[
"sf1",
36
],
[
"terminalBlock4",
37
],
[
"sf2",
38
],
[
"db25Balanced",
39
],
[
"v36",
40
],
[
"block4W",
41
],
[
"iripRj45",
42
],
[
"irEthQRj45",
43
],
[
"iripBnc",
44
],
[
"rs530WA",
45
],
[
"v35WA",
46
],
[
"irEthQBnc",
47
],
[
"v35Db25",
48
],
[
"rj11",
49
],
[
"mtrj",
50
],
[
"lc",
51
],
[
"terminalBlock2",
52
],
[
"irEth10s100",
53
],
[
"scsi68",
54
],
[
"sf3",
55
],
[
"fcLH",
56
],
[
"telco50",
57
],
[
"telco64",
58
],
[
"irEthQN",
59
],
[
"terminalBlock6",
60
],
[
"scLH",
61
],
[
"stLH",
62
],
[
"lcLH",
63
],
[
"sfpIn",
64
],
[
"sfpOut",
65
],
[
"db44",
66
],
[
"db62",
67
],
[
"v24Db9",
68
],
[
"scsi40",
69
],
[
"sf1NineRow",
70
],
[
"sf2NineRow",
71
],
[
"sf3NineRow",
72
],
[
"smartSerial26",
73
],
[
"miniUsb5",
74
],
[
"db26",
75
],
[
"comboUtpSfpIn",
76
],
[
"comboUtpSfpOut",
77
],
[
"none",
255
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The connector of the port/interface. other - none of the specified connectors none - no connector."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. RAD support.
Module: RAD-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifAlias', 'ifIndex', 'InterfaceIndexOrZero', 'ifDescr'], 'APS-MIB': ['apsConfigEntry'], 'ATM-MIB': ['atmVplVpi', 'atmVclVpi', 'atmVclVci', 'aal5VccVpi', 'aal5VccVci', 'atmVpCrossConnectEntry', 'atmVcCrossConnectEntry', 'atmTrafficDescrParamEntry', 'atmVclEntry', 'aal5VccEntry'], 'DS1-MIB': ['dsx1LineStatus', 'dsx1LineStatusLastChange', 'dsx1CurrentIndex', 'dsx1LineIndex', 'dsx1IntervalIndex', 'dsx1IntervalNumber', 'dsx1LoopbackStatus', 'dsx1TotalIndex'], 'DS3-MIB': ['dsx3LineStatus', 'dsx3ConfigEntry', 'dsx3LoopbackStatus'], 'IMA-MIB': ['imaGroupIndex', 'imaLinkIfIndex', 'imaGroupFailureStatus'], 'MAU-MIB': ['rpMauMediaAvailable'], 'ATMF-CES': ['atmfCESCbrIndex', 'atmfCESConfEntry'], 'IPOA-MIB': ['ipoaLisIfMappingEntry'], 'ISDN-MIB': ['isdnSignalingEntry'], 'LLDP-MIB': ['LldpPortIdSubtype'], 'SNMPv2-TC': ['TimeStamp', 'TAddress', 'TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'DateAndTime', 'TruthValue', 'RowPointer'], 'ATM-TC-MIB': ['AtmTrafficDescrParamIndex'], 'BRIDGE-MIB': ['Timeout', 'BridgeId', 'dot1dBasePortEntry'], 'SNMPv2-SMI': ['Integer32', 'Counter32', 'TimeTicks', 'enterprises', 'IpAddress', 'Gauge32', 'Unsigned32', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-IDENTITY', 'Counter64'], 'RFC1381-MIB': ['IfIndexType'], 'DIFFSERV-MIB': ['IndexIntegerNextFree', 'IndexInteger'], 'DOT3-OAM-MIB': ['dot3OamEntry', 'dot3OamOperStatus'], 'Q-BRIDGE-MIB': ['VlanIndex', 'PortList', 'dot1qVlanStaticEntry'], 'DS0BUNDLE-MIB': ['dsx0BundleEntry'], 'FRNETSERV-MIB': ['frPVCEndptDLCIIndex'], 'FDDI-SMT73-MIB': ['fddimibPORTPCMState'], 'IANAifType-MIB': ['IANAifType'], 'MPLS-TC-STD-MIB': ['MplsLabel', 'MplsTunnelIndex', 'MplsOwner', 'MplsLdpIdentifier', 'MplsLsrIdentifier'], 'PerfHist-TC-MIB': ['PerfCurrentCount', 'PerfIntervalCount', 'PerfTotalCount'], 'IEEE8021-CFM-MIB': ['dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'SNMP-REPEATER-MIB': ['rptrGroupOperStatus', 'rptrPortOperStatus'], 'MULTI-MEDIA-MIB-TC': ['MmTAddressTag', 'MmEndpointID', 'MmAliasAddress', 'MmH323EndpointType', 'MmGatekeeperID', 'MmAliasTag'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'DISMAN-SCHEDULE-MIB': ['schedEntry'], 'HDSL2-SHDSL-LINE-MIB': ['hdsl2ShdslEndpointCurrEntry', 'hdsl2ShdslInvIndex', 'hdsl2ShdslEndpointSide', 'hdsl2ShdslSpanConfProfileEntry'], 'FR-ATM-PVC-SERVICE-IWF-MIB': ['frAtmIwfConnectionEntry']}Related source files and packages:
Status in source: mandatory.
Names: physicalConnector
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"physicalConnector",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"other",
"(",
"1",
")",
",",
"v35",
"(",
"2",
")",
",",
"rs530",
"(",
"3",
")",
",",
"x21",
"(",
"4",
")",
",",
"bnc",
"(",
"5",
")",
",",
"utp",
"(",
"6",
")",
",",
"aui",
"(",
"7",
")",
",",
"rs422",
"(",
"8",
")",
",",
"crossUtp",
"(",
"9",
")",
",",
"rj45",
"(",
"10",
")",
",",
"v24",
"(",
"11",
")",
",",
"g703",
"(",
"12",
")",
",",
"termBlock3AndRj45",
"(",
"13",
")",
",",
"terminalBlock3",
"(",
"14",
")",
",",
"terminalBlock5",
"(",
"15",
")",
",",
"terminalBlock7",
"(",
"16",
")",
",",
"db25",
"(",
"17",
")",
",",
"db15",
"(",
"18",
")",
",",
"rj45ethernet",
"(",
"19",
")",
",",
"termBlock5AndRj45",
"(",
"20",
")",
",",
"db9",
"(",
"21",
")",
",",
"g703E1",
"(",
"22",
")",
",",
"g703E1-LTU",
"(",
"23",
")",
",",
"sc",
"(",
"24",
")",
",",
"st",
"(",
"25",
")",
",",
"stl",
"(",
"26",
")",
",",
"fc",
"(",
"27",
")",
",",
"tb5w",
"(",
"28",
")",
",",
"termBlock6AndRj45",
"(",
"29",
")",
",",
"ethBnc",
"(",
"30",
")",
",",
"scsi26",
"(",
"31",
")",
",",
"eth4381",
"(",
"32",
")",
",",
"twoBnc",
"(",
"33",
")",
",",
"scsi50",
"(",
"34",
")",
",",
"twoMiniBnc",
"(",
"35",
")",
",",
"sf1",
"(",
"36",
")",
",",
"terminalBlock4",
"(",
"37",
")",
",",
"sf2",
"(",
"38",
")",
",",
"v36",
"(",
"40",
")",
",",
"block4W",
"(",
"41",
")",
",",
"none",
"(",
"255",
")",
"}",
"ACCESS",
"read-only",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"The connector of the port/interface. other - none of the specified connectors none - no connector.\"",
"::=",
"{",
"physicalConnectorEntry",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"other",
1
],
[
"v35",
2
],
[
"rs530",
3
],
[
"x21",
4
],
[
"bnc",
5
],
[
"utp",
6
],
[
"aui",
7
],
[
"rs422",
8
],
[
"crossUtp",
9
],
[
"rj45",
10
],
[
"v24",
11
],
[
"g703",
12
],
[
"termBlock3AndRj45",
13
],
[
"terminalBlock3",
14
],
[
"terminalBlock5",
15
],
[
"terminalBlock7",
16
],
[
"db25",
17
],
[
"db15",
18
],
[
"rj45ethernet",
19
],
[
"termBlock5AndRj45",
20
],
[
"db9",
21
],
[
"g703E1",
22
],
[
"g703E1-LTU",
23
],
[
"sc",
24
],
[
"st",
25
],
[
"stl",
26
],
[
"fc",
27
],
[
"tb5w",
28
],
[
"termBlock6AndRj45",
29
],
[
"ethBnc",
30
],
[
"scsi26",
31
],
[
"eth4381",
32
],
[
"twoBnc",
33
],
[
"scsi50",
34
],
[
"twoMiniBnc",
35
],
[
"sf1",
36
],
[
"terminalBlock4",
37
],
[
"sf2",
38
],
[
"v36",
40
],
[
"block4W",
41
],
[
"none",
255
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"The connector of the port/interface. other - none of the specified connectors none - no connector."
],
null,
null,
null,
null
]
}Module: DACS-MIB
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['Counter', 'TimeTicks', 'enterprises', 'Gauge', 'NetworkAddress', 'IpAddress'], 'RFC1213-MIB': ['DisplayString']}Module: DACS-MIB
{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['Counter', 'TimeTicks', 'enterprises', 'Gauge', 'NetworkAddress', 'IpAddress'], 'RFC1213-MIB': ['DisplayString']}Status in source: current.
Names: physicalConnector
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"physicalConnector",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"other",
"(",
"1",
")",
",",
"v35",
"(",
"2",
")",
",",
"rs530",
"(",
"3",
")",
",",
"x21",
"(",
"4",
")",
",",
"bnc",
"(",
"5",
")",
",",
"utp",
"(",
"6",
")",
",",
"aui",
"(",
"7",
")",
",",
"rs422",
"(",
"8",
")",
",",
"crossUtp",
"(",
"9",
")",
",",
"rj45",
"(",
"10",
")",
",",
"v24",
"(",
"11",
")",
",",
"g703",
"(",
"12",
")",
",",
"termBlock3AndRj45",
"(",
"13",
")",
",",
"terminalBlock3",
"(",
"14",
")",
",",
"terminalBlock5",
"(",
"15",
")",
",",
"terminalBlock7",
"(",
"16",
")",
",",
"db25",
"(",
"17",
")",
",",
"db15",
"(",
"18",
")",
",",
"rj45ethernet",
"(",
"19",
")",
",",
"termBlock5AndRj45",
"(",
"20",
")",
",",
"db9",
"(",
"21",
")",
",",
"g703E1",
"(",
"22",
")",
",",
"g703E1-LTU",
"(",
"23",
")",
",",
"sc",
"(",
"24",
")",
",",
"st",
"(",
"25",
")",
",",
"stl",
"(",
"26",
")",
",",
"fc",
"(",
"27",
")",
",",
"tb5w",
"(",
"28",
")",
",",
"termBlock6AndRj45",
"(",
"29",
")",
",",
"ethBnc",
"(",
"30",
")",
",",
"scsi26",
"(",
"31",
")",
",",
"eth4381",
"(",
"32",
")",
",",
"twoBnc",
"(",
"33",
")",
",",
"scsi50",
"(",
"34",
")",
",",
"twoMiniBnc",
"(",
"35",
")",
",",
"sf1",
"(",
"36",
")",
",",
"terminalBlock4",
"(",
"37",
")",
",",
"sf2",
"(",
"38",
")",
",",
"db25Balanced",
"(",
"39",
")",
",",
"v36",
"(",
"40",
")",
",",
"block4W",
"(",
"41",
")",
",",
"iripRj45",
"(",
"42",
")",
",",
"irEthQRj45",
"(",
"43",
")",
",",
"iripBnc",
"(",
"44",
")",
",",
"rs530WA",
"(",
"45",
")",
",",
"v35WA",
"(",
"46",
")",
",",
"irEthQBnc",
"(",
"47",
")",
",",
"v35Db25",
"(",
"48",
")",
",",
"rj11",
"(",
"49",
")",
",",
"mtrj",
"(",
"50",
")",
",",
"lc",
"(",
"51",
")",
",",
"terminalBlock2",
"(",
"52",
")",
",",
"irEth10s100",
"(",
"53",
")",
",",
"scsi68",
"(",
"54",
")",
",",
"none",
"(",
"255",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The connector of the port/interface. other - none of the specified connectors none - no connector.\"",
"::=",
"{",
"physicalConnectorEntry",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"other",
1
],
[
"v35",
2
],
[
"rs530",
3
],
[
"x21",
4
],
[
"bnc",
5
],
[
"utp",
6
],
[
"aui",
7
],
[
"rs422",
8
],
[
"crossUtp",
9
],
[
"rj45",
10
],
[
"v24",
11
],
[
"g703",
12
],
[
"termBlock3AndRj45",
13
],
[
"terminalBlock3",
14
],
[
"terminalBlock5",
15
],
[
"terminalBlock7",
16
],
[
"db25",
17
],
[
"db15",
18
],
[
"rj45ethernet",
19
],
[
"termBlock5AndRj45",
20
],
[
"db9",
21
],
[
"g703E1",
22
],
[
"g703E1-LTU",
23
],
[
"sc",
24
],
[
"st",
25
],
[
"stl",
26
],
[
"fc",
27
],
[
"tb5w",
28
],
[
"termBlock6AndRj45",
29
],
[
"ethBnc",
30
],
[
"scsi26",
31
],
[
"eth4381",
32
],
[
"twoBnc",
33
],
[
"scsi50",
34
],
[
"twoMiniBnc",
35
],
[
"sf1",
36
],
[
"terminalBlock4",
37
],
[
"sf2",
38
],
[
"db25Balanced",
39
],
[
"v36",
40
],
[
"block4W",
41
],
[
"iripRj45",
42
],
[
"irEthQRj45",
43
],
[
"iripBnc",
44
],
[
"rs530WA",
45
],
[
"v35WA",
46
],
[
"irEthQBnc",
47
],
[
"v35Db25",
48
],
[
"rj11",
49
],
[
"mtrj",
50
],
[
"lc",
51
],
[
"terminalBlock2",
52
],
[
"irEth10s100",
53
],
[
"scsi68",
54
],
[
"none",
255
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The connector of the port/interface. other - none of the specified connectors none - no connector."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. RAD support.
Module: ACE202-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifAlias', 'ifIndex'], 'ATM-MIB': ['atmVclEntry', 'aal5VccEntry', 'atmVplVpi', 'atmVclVpi', 'atmVclVci'], 'DS1-MIB': ['dsx1LineStatus', 'dsx1LineStatusLastChange', 'dsx1CurrentIndex', 'dsx1LineIndex', 'dsx1IntervalIndex', 'dsx1IntervalNumber', 'dsx1LoopbackStatus', 'dsx1TotalIndex'], 'IMA-MIB': ['imaGroupIndex', 'imaLinkIfIndex', 'imaGroupFailureStatus'], 'ISDN-MIB': ['isdnSignalingEntry'], 'SNMPv2-TC': ['RowStatus', 'DisplayString', 'TimeStamp', 'DateAndTime'], 'SNMPv2-SMI': ['TimeTicks', 'enterprises', 'IpAddress', 'OBJECT-TYPE', 'Integer32', 'Counter32', 'Gauge32', 'OBJECT-IDENTITY', 'NOTIFICATION-TYPE'], 'PerfHist-TC-MIB': ['PerfCurrentCount', 'PerfIntervalCount', 'PerfTotalCount'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'FR-ATM-PVC-SERVICE-IWF-MIB': ['frAtmIwfConnectionEntry']}Status in source: mandatory.
Names: physicalConnector
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"physicalConnector",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"other",
"(",
"1",
")",
",",
"v35",
"(",
"2",
")",
",",
"rs530",
"(",
"3",
")",
",",
"x21",
"(",
"4",
")",
",",
"bnc",
"(",
"5",
")",
",",
"utp",
"(",
"6",
")",
",",
"aui",
"(",
"7",
")",
",",
"rs422",
"(",
"8",
")",
",",
"crossUtp",
"(",
"9",
")",
",",
"rj45",
"(",
"10",
")",
",",
"v24",
"(",
"11",
")",
",",
"g703",
"(",
"12",
")",
",",
"termBlock3AndRj45",
"(",
"13",
")",
",",
"terminalBlock3",
"(",
"14",
")",
",",
"terminalBlock5",
"(",
"15",
")",
",",
"terminalBlock7",
"(",
"16",
")",
",",
"db25",
"(",
"17",
")",
",",
"db15",
"(",
"18",
")",
",",
"rj45ethernet",
"(",
"19",
")",
",",
"termBlock5AndRj45",
"(",
"20",
")",
",",
"db9",
"(",
"21",
")",
",",
"g703E1",
"(",
"22",
")",
",",
"g703E1-LTU",
"(",
"23",
")",
",",
"sc",
"(",
"24",
")",
",",
"st",
"(",
"25",
")",
",",
"stl",
"(",
"26",
")",
",",
"fc",
"(",
"27",
")",
",",
"tb5w",
"(",
"28",
")",
",",
"termBlock6AndRj45",
"(",
"29",
")",
",",
"none",
"(",
"255",
")",
"}",
"ACCESS",
"read-only",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"The connector of the port/interface. other - none of the specified connectors none - no connector.\"",
"::=",
"{",
"physicalConnectorEntry",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"other",
1
],
[
"v35",
2
],
[
"rs530",
3
],
[
"x21",
4
],
[
"bnc",
5
],
[
"utp",
6
],
[
"aui",
7
],
[
"rs422",
8
],
[
"crossUtp",
9
],
[
"rj45",
10
],
[
"v24",
11
],
[
"g703",
12
],
[
"termBlock3AndRj45",
13
],
[
"terminalBlock3",
14
],
[
"terminalBlock5",
15
],
[
"terminalBlock7",
16
],
[
"db25",
17
],
[
"db15",
18
],
[
"rj45ethernet",
19
],
[
"termBlock5AndRj45",
20
],
[
"db9",
21
],
[
"g703E1",
22
],
[
"g703E1-LTU",
23
],
[
"sc",
24
],
[
"st",
25
],
[
"stl",
26
],
[
"fc",
27
],
[
"tb5w",
28
],
[
"termBlock6AndRj45",
29
],
[
"none",
255
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"The connector of the port/interface. other - none of the specified connectors none - no connector."
],
null,
null,
null,
null
]
}Module: OPTIMUX-MIB
See published definition above
{'IF-MIB': ['ifIndex', 'InterfaceIndex'], 'DS1-MIB': ['dsx1LoopbackStatus'], 'DS3-MIB': ['dsx3LoopbackStatus'], 'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises', 'Counter', 'IpAddress', 'TimeTicks'], 'RFC1213-MIB': ['DisplayString']}Module: OPTIMUX-MIB
See published definition above
{'IF-MIB': ['ifIndex', 'InterfaceIndex'], 'DS1-MIB': ['dsx1LoopbackStatus'], 'DS3-MIB': ['dsx3LoopbackStatus'], 'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises', 'Counter', 'IpAddress', 'TimeTicks'], 'RFC1213-MIB': ['DisplayString']}Status in source: current.
Names: physicalConnector
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"physicalConnector",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"other",
"(",
"1",
")",
",",
"v35",
"(",
"2",
")",
",",
"rs530",
"(",
"3",
")",
",",
"x21",
"(",
"4",
")",
",",
"bnc",
"(",
"5",
")",
",",
"utp",
"(",
"6",
")",
",",
"aui",
"(",
"7",
")",
",",
"rs422",
"(",
"8",
")",
",",
"crossUtp",
"(",
"9",
")",
",",
"rj45",
"(",
"10",
")",
",",
"v24",
"(",
"11",
")",
",",
"g703",
"(",
"12",
")",
",",
"termBlock3AndRj45",
"(",
"13",
")",
",",
"terminalBlock3",
"(",
"14",
")",
",",
"terminalBlock5",
"(",
"15",
")",
",",
"terminalBlock7",
"(",
"16",
")",
",",
"db25",
"(",
"17",
")",
",",
"db15",
"(",
"18",
")",
",",
"rj45ethernet",
"(",
"19",
")",
",",
"termBlock5AndRj45",
"(",
"20",
")",
",",
"db9",
"(",
"21",
")",
",",
"g703E1",
"(",
"22",
")",
",",
"g703E1-LTU",
"(",
"23",
")",
",",
"sc",
"(",
"24",
")",
",",
"st",
"(",
"25",
")",
",",
"stl",
"(",
"26",
")",
",",
"fc",
"(",
"27",
")",
",",
"tb5w",
"(",
"28",
")",
",",
"termBlock6AndRj45",
"(",
"29",
")",
",",
"ethBnc",
"(",
"30",
")",
",",
"scsi26",
"(",
"31",
")",
",",
"eth4381",
"(",
"32",
")",
",",
"twoBnc",
"(",
"33",
")",
",",
"scsi50",
"(",
"34",
")",
",",
"twoMiniBnc",
"(",
"35",
")",
",",
"sf1",
"(",
"36",
")",
",",
"terminalBlock4",
"(",
"37",
")",
",",
"sf2",
"(",
"38",
")",
",",
"db25Balanced",
"(",
"39",
")",
",",
"v36",
"(",
"40",
")",
",",
"block4W",
"(",
"41",
")",
",",
"iripRj45",
"(",
"42",
")",
",",
"irEthQRj45",
"(",
"43",
")",
",",
"iripBnc",
"(",
"44",
")",
",",
"rs530WA",
"(",
"45",
")",
",",
"v35WA",
"(",
"46",
")",
",",
"irEthQBnc",
"(",
"47",
")",
",",
"v35Db25",
"(",
"48",
")",
",",
"rj11",
"(",
"49",
")",
",",
"mtrj",
"(",
"50",
")",
",",
"lc",
"(",
"51",
")",
",",
"terminalBlock2",
"(",
"52",
")",
",",
"irEth10s100",
"(",
"53",
")",
",",
"scsi68",
"(",
"54",
")",
",",
"sf3",
"(",
"55",
")",
",",
"fcLH",
"(",
"56",
")",
",",
"telco50",
"(",
"57",
")",
",",
"telco64",
"(",
"58",
")",
",",
"irEthQN",
"(",
"59",
")",
",",
"terminalBlock6",
"(",
"60",
")",
",",
"scLH",
"(",
"61",
")",
",",
"stLH",
"(",
"62",
")",
",",
"lcLH",
"(",
"63",
")",
",",
"sfpIn",
"(",
"64",
")",
",",
"sfpOut",
"(",
"65",
")",
",",
"db44",
"(",
"66",
")",
",",
"db62",
"(",
"67",
")",
",",
"v24Db9",
"(",
"68",
")",
",",
"scsi40",
"(",
"69",
")",
",",
"sf1NineRow",
"(",
"70",
")",
",",
"sf2NineRow",
"(",
"71",
")",
",",
"sf3NineRow",
"(",
"72",
")",
",",
"smartSerial26",
"(",
"73",
")",
",",
"miniUsb5",
"(",
"74",
")",
",",
"db26",
"(",
"75",
")",
",",
"comboUtpSfpIn",
"(",
"76",
")",
",",
"comboUtpSfpOut",
"(",
"77",
")",
",",
"hiDensity160Pin",
"(",
"78",
")",
",",
"xfpIn",
"(",
"79",
")",
",",
"xfpOut",
"(",
"80",
")",
",",
"ssfpIn",
"(",
"81",
")",
",",
"ssfpOut",
"(",
"82",
")",
",",
"comboUtpSsfpIn",
"(",
"83",
")",
",",
"comboUtpSsfpOut",
"(",
"84",
")",
",",
"scsi68DS",
"(",
"85",
")",
",",
"miniBnc",
"(",
"86",
")",
",",
"sMA",
"(",
"87",
")",
",",
"rj45Shdsl8w",
"(",
"88",
")",
",",
"miniBncAndRj45",
"(",
"89",
")",
",",
"sfpPlusIn",
"(",
"90",
")",
",",
"sfpPlusOut",
"(",
"91",
")",
",",
"none",
"(",
"255",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The connector of the port/interface. other - none of the specified connectors none - no connector.\"",
"::=",
"{",
"physicalConnectorEntry",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"other",
1
],
[
"v35",
2
],
[
"rs530",
3
],
[
"x21",
4
],
[
"bnc",
5
],
[
"utp",
6
],
[
"aui",
7
],
[
"rs422",
8
],
[
"crossUtp",
9
],
[
"rj45",
10
],
[
"v24",
11
],
[
"g703",
12
],
[
"termBlock3AndRj45",
13
],
[
"terminalBlock3",
14
],
[
"terminalBlock5",
15
],
[
"terminalBlock7",
16
],
[
"db25",
17
],
[
"db15",
18
],
[
"rj45ethernet",
19
],
[
"termBlock5AndRj45",
20
],
[
"db9",
21
],
[
"g703E1",
22
],
[
"g703E1-LTU",
23
],
[
"sc",
24
],
[
"st",
25
],
[
"stl",
26
],
[
"fc",
27
],
[
"tb5w",
28
],
[
"termBlock6AndRj45",
29
],
[
"ethBnc",
30
],
[
"scsi26",
31
],
[
"eth4381",
32
],
[
"twoBnc",
33
],
[
"scsi50",
34
],
[
"twoMiniBnc",
35
],
[
"sf1",
36
],
[
"terminalBlock4",
37
],
[
"sf2",
38
],
[
"db25Balanced",
39
],
[
"v36",
40
],
[
"block4W",
41
],
[
"iripRj45",
42
],
[
"irEthQRj45",
43
],
[
"iripBnc",
44
],
[
"rs530WA",
45
],
[
"v35WA",
46
],
[
"irEthQBnc",
47
],
[
"v35Db25",
48
],
[
"rj11",
49
],
[
"mtrj",
50
],
[
"lc",
51
],
[
"terminalBlock2",
52
],
[
"irEth10s100",
53
],
[
"scsi68",
54
],
[
"sf3",
55
],
[
"fcLH",
56
],
[
"telco50",
57
],
[
"telco64",
58
],
[
"irEthQN",
59
],
[
"terminalBlock6",
60
],
[
"scLH",
61
],
[
"stLH",
62
],
[
"lcLH",
63
],
[
"sfpIn",
64
],
[
"sfpOut",
65
],
[
"db44",
66
],
[
"db62",
67
],
[
"v24Db9",
68
],
[
"scsi40",
69
],
[
"sf1NineRow",
70
],
[
"sf2NineRow",
71
],
[
"sf3NineRow",
72
],
[
"smartSerial26",
73
],
[
"miniUsb5",
74
],
[
"db26",
75
],
[
"comboUtpSfpIn",
76
],
[
"comboUtpSfpOut",
77
],
[
"hiDensity160Pin",
78
],
[
"xfpIn",
79
],
[
"xfpOut",
80
],
[
"ssfpIn",
81
],
[
"ssfpOut",
82
],
[
"comboUtpSsfpIn",
83
],
[
"comboUtpSsfpOut",
84
],
[
"scsi68DS",
85
],
[
"miniBnc",
86
],
[
"sMA",
87
],
[
"rj45Shdsl8w",
88
],
[
"miniBncAndRj45",
89
],
[
"sfpPlusIn",
90
],
[
"sfpPlusOut",
91
],
[
"none",
255
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The connector of the port/interface. other - none of the specified connectors none - no connector."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. RAD support.
Module: RAD-GEN-MIB
See published definition above
{'IF-MIB': ['ifAlias', 'ifIndex'], 'RAD-TC': ['FileType', 'RadEntityType', 'AlarmForwardingCause'], 'SNMPv2-TC': ['TimeStamp', 'TDomain', 'TAddress', 'TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'DateAndTime', 'RowPointer', 'MacAddress'], 'ENTITY-MIB': ['entPhysicalAlias', 'entPhysicalDescr', 'PhysicalIndexOrZero'], 'SNMPv2-MIB': ['sysName'], 'SNMPv2-SMI': ['Integer32', 'Counter32', 'TimeTicks', 'IpAddress', 'Gauge32', 'Unsigned32', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-IDENTITY', 'Counter64'], 'RAD-SMI-MIB': ['radGen', 'radSpecificDevices', 'systems', 'fileTransfer'], 'IANAifType-MIB': ['IANAifType'], 'BFD-TC-STD-MIB-R': ['BfdDiagTC', 'BfdIntervalTC'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'DISMAN-SCHEDULE-MIB': ['schedEntry']}Status in source: current.
Names: physicalConnector
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"physicalConnector",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"other",
"(",
"1",
")",
",",
"v35",
"(",
"2",
")",
",",
"rs530",
"(",
"3",
")",
",",
"x21",
"(",
"4",
")",
",",
"bnc",
"(",
"5",
")",
",",
"utp",
"(",
"6",
")",
",",
"aui",
"(",
"7",
")",
",",
"rs422",
"(",
"8",
")",
",",
"crossUtp",
"(",
"9",
")",
",",
"rj45",
"(",
"10",
")",
",",
"v24",
"(",
"11",
")",
",",
"g703",
"(",
"12",
")",
",",
"termBlock3AndRj45",
"(",
"13",
")",
",",
"terminalBlock3",
"(",
"14",
")",
",",
"terminalBlock5",
"(",
"15",
")",
",",
"terminalBlock7",
"(",
"16",
")",
",",
"db25",
"(",
"17",
")",
",",
"db15",
"(",
"18",
")",
",",
"rj45ethernet",
"(",
"19",
")",
",",
"termBlock5AndRj45",
"(",
"20",
")",
",",
"db9",
"(",
"21",
")",
",",
"g703E1",
"(",
"22",
")",
",",
"g703E1-LTU",
"(",
"23",
")",
",",
"sc",
"(",
"24",
")",
",",
"st",
"(",
"25",
")",
",",
"stl",
"(",
"26",
")",
",",
"fc",
"(",
"27",
")",
",",
"tb5w",
"(",
"28",
")",
",",
"termBlock6AndRj45",
"(",
"29",
")",
",",
"ethBnc",
"(",
"30",
")",
",",
"scsi26",
"(",
"31",
")",
",",
"eth4381",
"(",
"32",
")",
",",
"twoBnc",
"(",
"33",
")",
",",
"scsi50",
"(",
"34",
")",
",",
"twoMiniBnc",
"(",
"35",
")",
",",
"sf1",
"(",
"36",
")",
",",
"terminalBlock4",
"(",
"37",
")",
",",
"sf2",
"(",
"38",
")",
",",
"db25Balanced",
"(",
"39",
")",
",",
"v36",
"(",
"40",
")",
",",
"block4W",
"(",
"41",
")",
",",
"iripRj45",
"(",
"42",
")",
",",
"irEthQRj45",
"(",
"43",
")",
",",
"iripBnc",
"(",
"44",
")",
",",
"rs530WA",
"(",
"45",
")",
",",
"v35WA",
"(",
"46",
")",
",",
"irEthQBnc",
"(",
"47",
")",
",",
"v35Db25",
"(",
"48",
")",
",",
"rj11",
"(",
"49",
")",
",",
"mtrj",
"(",
"50",
")",
",",
"lc",
"(",
"51",
")",
",",
"terminalBlock2",
"(",
"52",
")",
",",
"irEth10s100",
"(",
"53",
")",
",",
"scsi68",
"(",
"54",
")",
",",
"sf3",
"(",
"55",
")",
",",
"fcLH",
"(",
"56",
")",
",",
"telco50",
"(",
"57",
")",
",",
"telco64",
"(",
"58",
")",
",",
"irEthQN",
"(",
"59",
")",
",",
"none",
"(",
"255",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The connector of the port/interface. other - none of the specified connectors none - no connector.\"",
"::=",
"{",
"physicalConnectorEntry",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"other",
1
],
[
"v35",
2
],
[
"rs530",
3
],
[
"x21",
4
],
[
"bnc",
5
],
[
"utp",
6
],
[
"aui",
7
],
[
"rs422",
8
],
[
"crossUtp",
9
],
[
"rj45",
10
],
[
"v24",
11
],
[
"g703",
12
],
[
"termBlock3AndRj45",
13
],
[
"terminalBlock3",
14
],
[
"terminalBlock5",
15
],
[
"terminalBlock7",
16
],
[
"db25",
17
],
[
"db15",
18
],
[
"rj45ethernet",
19
],
[
"termBlock5AndRj45",
20
],
[
"db9",
21
],
[
"g703E1",
22
],
[
"g703E1-LTU",
23
],
[
"sc",
24
],
[
"st",
25
],
[
"stl",
26
],
[
"fc",
27
],
[
"tb5w",
28
],
[
"termBlock6AndRj45",
29
],
[
"ethBnc",
30
],
[
"scsi26",
31
],
[
"eth4381",
32
],
[
"twoBnc",
33
],
[
"scsi50",
34
],
[
"twoMiniBnc",
35
],
[
"sf1",
36
],
[
"terminalBlock4",
37
],
[
"sf2",
38
],
[
"db25Balanced",
39
],
[
"v36",
40
],
[
"block4W",
41
],
[
"iripRj45",
42
],
[
"irEthQRj45",
43
],
[
"iripBnc",
44
],
[
"rs530WA",
45
],
[
"v35WA",
46
],
[
"irEthQBnc",
47
],
[
"v35Db25",
48
],
[
"rj11",
49
],
[
"mtrj",
50
],
[
"lc",
51
],
[
"terminalBlock2",
52
],
[
"irEth10s100",
53
],
[
"scsi68",
54
],
[
"sf3",
55
],
[
"fcLH",
56
],
[
"telco50",
57
],
[
"telco64",
58
],
[
"irEthQN",
59
],
[
"none",
255
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The connector of the port/interface. other - none of the specified connectors none - no connector."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. RAD support.
Module: ACE2002-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifAlias', 'ifIndex'], 'ATM-MIB': ['atmVclEntry', 'aal5VccEntry', 'aal5VccVpi', 'aal5VccVci', 'atmVplVpi', 'atmVclVpi', 'atmVclVci', 'atmVpCrossConnectEntry', 'atmVcCrossConnectEntry', 'atmVclEntry', 'aal5VccEntry'], 'DS1-MIB': ['dsx1LineStatus', 'dsx1LineStatusLastChange', 'dsx1CurrentIndex', 'dsx1LineIndex', 'dsx1IntervalIndex', 'dsx1IntervalNumber', 'dsx1LoopbackStatus', 'dsx1TotalIndex'], 'IMA-MIB': ['imaGroupIndex', 'imaLinkIfIndex', 'imaGroupFailureStatus'], 'ATMF-CES': ['atmfCESConfEntry'], 'IPOA-MIB': ['ipoaLisIfMappingEntry'], 'ISDN-MIB': ['isdnSignalingEntry'], 'SNMPv2-TC': ['RowStatus', 'DisplayString', 'TimeStamp', 'DateAndTime', 'TruthValue'], 'BRIDGE-MIB': ['dot1dBasePortEntry'], 'SNMPv2-SMI': ['TimeTicks', 'enterprises', 'IpAddress', 'OBJECT-TYPE', 'Integer32', 'Counter32', 'Gauge32', 'OBJECT-IDENTITY', 'NOTIFICATION-TYPE', 'Counter64', 'Unsigned32'], 'Q-BRIDGE-MIB': ['VlanIndex', 'PortList'], 'IANAifType-MIB': ['IANAifType'], 'PerfHist-TC-MIB': ['PerfCurrentCount', 'PerfIntervalCount', 'PerfTotalCount'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'FR-ATM-PVC-SERVICE-IWF-MIB': ['frAtmIwfConnectionEntry']}Historical records
physicalConnector OBJECT-TYPE
SYNTAX INTEGER
{
other (1),
v35 (2),
rs530 (3),
x21 (4),
bnc (5),
utp (6),
aui (7),
rs422 (8),
crossUtp (9),
rj45 (10),
v24 (11),
g703 (12),
termBlock3AndRj45 (13),
terminalBlock3 (14),
terminalBlock5 (15),
terminalBlock7 (16),
db25 (17),
db15 (18),
rj45ethernet (19),
termBlock5AndRj45 (20),
db9 (21),
g703E1 (22),
g703E1-LTU (23),
sc (24),
st (25),
stl (26),
fc (27),
tb5w (28),
termBlock6AndRj45 (29),
ethBnc (30),
scsi26 (31),
eth4381 (32),
twoBnc (33),
scsi50 (34),
twoMiniBnc (35),
sf1 (36),
terminalBlock4 (37),
sf2 (38),
db25Balanced (39),
v36 (40),
block4W (41),
iripRj45 (42),
irEthQRj45 (43),
iripBnc (44),
rs530WA (45),
v35WA (46),
irEthQBnc (47),
v35Db25 (48),
rj11 (49),
mtrj (50),
lc (51),
terminalBlock2 (52),
irEth10s100 (53),
scsi68 (54),
sf3 (55),
fcLH (56),
none (255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The connector of the port/interface.
other - none of the specified connectors
none - no connector."
::= { physicalConnectorEntry 2 }
physicalConnector OBJECT-TYPE
SYNTAX INTEGER
{
other (1),
v35 (2),
rs530 (3),
x21 (4),
bnc (5),
utp (6),
aui (7),
rs422 (8),
crossUtp (9),
rj45 (10),
v24 (11),
g703 (12),
termBlock3AndRj45 (13),
terminalBlock3 (14),
terminalBlock5 (15),
terminalBlock7 (16),
db25 (17),
db15 (18),
rj45ethernet (19),
termBlock5AndRj45 (20),
db9 (21),
g703E1 (22),
g703E1-LTU (23),
sc (24),
st (25),
stl (26),
fc (27),
tb5w (28),
termBlock6AndRj45 (29),
ethBnc (30),
scsi26 (31),
eth4381 (32),
twoBnc (33),
scsi50 (34),
twoMiniBnc (35),
sf1 (36),
terminalBlock4 (37),
sf2 (38),
db25Balanced (39),
v36 (40),
block4W (41),
iripRj45 (42),
irEthQRj45 (43),
iripBnc (44),
rs530WA (45),
v35WA (46),
irEthQBnc (47),
v35Db25 (48),
rj11 (49),
mtrj (50),
lc (51),
terminalBlock2 (52),
irEth10s100 (53),
scsi68 (54),
sf3 (55),
fcLH (56),
none (255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The connector of the port/interface.
other - none of the specified connectors
none - no connector."
::= { physicalConnectorEntry 2 }
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164.6.2.15.1.1.1 | portIdx | 0 | 0 | This object is an index of the specific port or interface. For a port, the index will be as agreed between agent and application. … |
| 1.3.6.1.4.1.164.6.2.15.1.1.3 | portOptWaveLength | 0 | 0 | Wave Length of an Optical interface/port in [nm] and specification if Laser LH,Laser or LED. notApplicable - for non-optical port… |
| 1.3.6.1.4.1.164.6.2.15.1.1.4 | portOptMode | 0 | 0 | Laser Mode of an Optical Laser interface/port. notApplicable - for non-Laser ports. |
| 1.3.6.1.4.1.164.6.2.15.1.1.5 | portBalance | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.1.1.6 | portDdmSupport | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.1.1.7 | portMfgName | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.1.1.8 | portTypicalMaxRange | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.1.1.9 | physicalConnectorString | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.1.1.10 | portVendorPartNo | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.1.1.11 | physicalConnectorUsed | 0 | 0 | |
| 1.3.6.1.4.1.164.6.2.15.1.1.18 | physicalConnectorSfpWaveLength | 0 | 0 |