An indication of the state of the Laser Enable control
(applicable to a Transmitter only). A write to this
object with a value of 2 will enable the laser and
a consequent read will return 'snmpEnabled'. Writing
any other value will release the snmp control and now
a read will be dependant on the state of LK4.
Parsed from file IRT4611HDx-MIB.my.txt
Company: irtelectronics
Module: IRT4611HDx-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
irt4611LaserEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), snmpEnabled(2), notEnabled(3), notApplicable(4) } ACCESS read-write STATUS mandatory DESCRIPTION "An indication of the state of the Laser Enable control (applicable to a Transmitter only). A write to this object with a value of 2 will enable the laser and a consequent read will return 'snmpEnabled'. Writing any other value will release the snmp control and now a read will be dependant on the state of LK4. " ::= { irt4611HDx 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.16557.3.26.5.0 | irt4611LaserEnable | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.16557.3.26.1 | irt4611Signal | 1 | 1 | For a transmitter this indicates that an input signal is present. For a receiver it indicates that that signal has been detected … |
| 1.3.6.1.4.1.16557.3.26.2 | irt4611Optical | 1 | 1 | For a transmitter indicates that there is output from the laser. For a receiver indicates that there is an optical input. |
| 1.3.6.1.4.1.16557.3.26.3 | irt4611OpticalConfig | 1 | 1 | In the case of a Transmitter options 1 to 15 indicate the Laser frequency. In the case of a Receiver the options 16 to 18 indicat… |
| 1.3.6.1.4.1.16557.3.26.4 | irt4611FactoryLevel | 1 | 1 | Factory Use Only. |
| 1.3.6.1.4.1.16557.3.26.6 | irt4611Reset | 1 | 1 | Writing a 2 to this object will cause the agent to reset. |
| 1.3.6.1.4.1.16557.3.26.7 | irt4611AlarmSource | 1 | 1 | On a Read will indicate which conditions may cause Traps. On a Write will set the conditions that can cause Traps. In a Trap indi… |
| 1.3.6.1.4.1.16557.3.26.8 | irt4611TrapSeqNo | 1 | 1 | A number that increases by one for every trap sent. |