Description 1
Indicate the IP type of entry.
Sources for this description
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.171.10.75.15.2.45.2.1.1
Indicate the IP type of entry.
Identification
{1 3 6 1 4 1 171 10 75 15 2 45 2 1 1}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 1 | ipv4 | 1 |
| 2 | ipv6 | 1 |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In DES-1210-28ME_B2, the row index consists of these components in order:
limitIpMulticastEntryProfileID (INTEGER): one numeric subidentifier for the non-negative value.limitIpMulticaststartIpAddr (IpAddress): four numeric subidentifiers, one per IPv4 address octet.limitIpMulticastendIpAddr (IpAddress): four numeric subidentifiers, one per IPv4 address octet.An instance has the form .1.3.6.1.4.1.171.10.75.15.2.45.2.1.1.<limitIpMulticastEntryProfileID>.<limitIpMulticaststartIpAddr: four octets>.<limitIpMulticastendIpAddr: four octets>. Use values present on the device and permitted by its MIB. Other definitions can differ.
Published row index variants: limitIpMulticastEntryIPType, limitIpMulticastEntryProfileID, limitIpMulticaststartIpAddr, limitIpMulticastendIpAddr; limitIpMulticastEntryProfileID, limitIpMulticaststartIpAddr, limitIpMulticastendIpAddr.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.10.75.15.2.45.2.1.1
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
limitIpMulticastEntryIPType OBJECT-TYPE
SYNTAX INTEGER {
ipv4(1),
ipv6(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicate the IP type of entry."
::= { limitIpMulticastEntry 1 }limitIpMulticastEntryProfileID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ProfileID of the limit ip multicast entry."
::= { limitIpMulticastEntry 1 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Indicate the IP type of entry.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Description 2
The ProfileID of the limit ip multicast entry.
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: limitIpMulticastEntryIPType
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"limitIpMulticastEntryIPType",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"ipv4",
"(",
"1",
")",
",",
"ipv6",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Indicate the IP type of entry.\"",
"::=",
"{",
"limitIpMulticastEntry",
"1",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"ipv4",
1
],
[
"ipv6",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Indicate the IP type of entry."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DES-1210-28MEbx
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'Q-BRIDGE-MIB': ['VlanId'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel'], 'IANA-ADDRESS-FAMILY-NUMBERS-MIB': ['AddressFamilyNumbers']}Related source files and packages:
Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DES-1210-28ME-B2
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'Q-BRIDGE-MIB': ['VlanId'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel'], 'IANA-ADDRESS-FAMILY-NUMBERS-MIB': ['AddressFamilyNumbers']}Module: DES-1210-28ME-B2
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'Q-BRIDGE-MIB': ['VlanId'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel'], 'IANA-ADDRESS-FAMILY-NUMBERS-MIB': ['AddressFamilyNumbers']}Status in source: current.
Names: limitIpMulticastEntryProfileID
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"limitIpMulticastEntryProfileID",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The ProfileID of the limit ip multicast entry.\"",
"::=",
"{",
"limitIpMulticastEntry",
"1",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The ProfileID of the limit ip multicast entry."
],
null,
null,
null,
null
]
}Module: DES-1210-28ME_B2
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'Q-BRIDGE-MIB': ['VlanId'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel'], 'IANA-ADDRESS-FAMILY-NUMBERS-MIB': ['AddressFamilyNumbers']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.10.75.15.2.45.2.1.2 | limitIpMulticaststartIpAddr, limitIpMulticastEntryProfileID | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.15.2.45.2.1.3 | limitIpMulticastendIpAddr, limitIpMulticaststartIpAddr | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.15.2.45.2.1.4 | limitIpMulticastStatus, limitIpMulticastendIpAddr | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.15.2.45.2.1.5 | limitIpMulticastStatus | 0 | 0 |