Description 1
The IGMP Type to be checked against the packet.A default value is '-1', which means the rule don't care this condition.
Sources for this description
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.171.10.75.5.15.3.1.1.22
The IGMP Type to be checked against the packet.A default value is '-1', which means the rule don't care this condition.
Identification
{1 3 6 1 4 1 171 10 75 5 15 3 1 1 22}
Definitions may combine these properties differently.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
aclL3RuleIgmpType OBJECT-TYPE
SYNTAX Integer32 (-1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The IGMP Type to be checked against the packet.A default value is '-1',
which means the rule don't care this condition."
DEFVAL { -1 }
::= { aclL3RuleEntry 22 }aclL3RulePortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the complete set of ports over which if the packet arrives
this filter rule will be applicable."
::= { aclL3RuleEntry 22 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
The IGMP Type to be checked against the packet.A default value is '-1', which means the rule don't care this condition.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Description 2
Specifies the complete set of ports over which if the packet arrives this filter rule will be applicable.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copies
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: aclL3RuleIgmpType
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"aclL3RuleIgmpType",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"1",
".",
".",
"255",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\" The IGMP Type to be checked against the packet.A default value is '-1', which means the rule don't care this condition.\"",
"DEFVAL",
"{",
"-",
"1",
"}",
"::=",
"{",
"aclL3RuleEntry",
"22",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-1,
255
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The IGMP Type to be checked against the packet.A default value is '-1', which means the rule don't care this condition."
],
null,
null,
null,
[
"DEFVAL",
-1
]
]
}Module: DES-1210-28_AX
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel']}Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DES-1210-28_AX
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel']}Related source files and packages:
Status in source: current.
Names: aclL3RulePortList
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"aclL3RulePortList",
"OBJECT-TYPE",
"SYNTAX",
"PortList",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Specifies the complete set of ports over which if the packet arrives this filter rule will be applicable.\"",
"::=",
"{",
"aclL3RuleEntry",
"22",
"}"
],
"syntax_tree": [
[
"row",
"PortList"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Specifies the complete set of ports over which if the packet arrives this filter rule will be applicable."
],
null,
null,
null,
null
]
}Module: DES-1210-28_AX
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel']}Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DES-1210-28-AX
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel']}Vendor MIB copy from the Netdisco archive.
Module: DES-1210-28-AX
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.1 | aclL3RuleAccessID | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.2 | aclL3RuleProfileNo | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.3 | aclL3RuleProtocol | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.4 | aclL3RuleICMPMessageType, aclL3RuleProtocolMask | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.5 | aclL3RuleICMPMessageCode, aclL3RuleICMPMessageType | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.6 | aclL3RuleDstIpAddr, aclL3RuleICMPMessageCode | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.7 | aclL3RuleSrcIpAddr, aclL3RuleDstIpAddr | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.8 | aclL3RuleDstIpAddrMask, aclL3RuleSrcIpAddr | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.9 | aclL3RuleSrcIpAddrMask, aclL3RuleDstIpAddrMask | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.10 | aclL3RuleTcpUdpDstPort, aclL3RuleSrcIpAddrMask | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.11 | aclL3RuleTcpUdpSrcPort, aclL3RuleTcpUdpDstPort | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.12 | aclL3RuleTcpUdpDstPortMask, aclL3RuleTcpUdpSrcPort | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.13 | aclL3RuleTcpUdpSrcPortMask, aclL3RuleTcpUdpDstPortMask | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.14 | aclL3RuleTcpAckBit, aclL3RuleTcpUdpSrcPortMask | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.15 | aclL3RuleTcpRstBit, aclL3RuleTcpAckBit | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.16 | aclL3RuleTcpUrgBit, aclL3RuleTcpRstBit | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.17 | aclL3RuleTcpPshBit, aclL3RuleTcpUrgBit | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.18 | aclL3RuleTcpSynBit, aclL3RuleTcpPshBit | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.19 | aclL3RuleTcpFinBit, aclL3RuleTcpSynBit | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.20 | aclL3RuleDscp, aclL3RuleTcpFinBit | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.21 | aclL3RuleIgmpType, aclL3RuleDscp | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.23 | aclL3RuleAction, aclL3RulePortList | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.24 | aclL3RuleAction | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.25 | aclL3RuleStatus, aclL3RuleRateLimit | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.26 | aclL3RuleReplaceDSCP | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.27 | aclL3RuleStatus | 0 | 0 |