Description 1
Source IP address to be matched with the packet. The default value will be zero, which means the rule don't care this condition.
Sources for this description
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.171.10.75.5.15.3.1.1.8
Source IP address to be matched with the packet. The default value will be zero, which means the rule don't care this condition.
Identification
{1 3 6 1 4 1 171 10 75 5 15 3 1 1 8}
Definitions may combine these properties differently.
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In DES-1210-28_AX, the row index consists of these components in order:
aclL3RuleAccessID (Integer32): one numeric subidentifier for the non-negative value.aclL3RuleProfileNo (Integer32): one numeric subidentifier for the non-negative value.An instance has the form .1.3.6.1.4.1.171.10.75.5.15.3.1.1.8.<aclL3RuleAccessID>.<aclL3RuleProfileNo>. Use values present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.10.75.5.15.3.1.1.8
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
aclL3RuleSrcIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Source IP address to be matched with the packet.
The default value will be zero, which means the
rule don't care this condition."
DEFVAL { '00000000'h }
::= { aclL3RuleEntry 8 }aclL3RuleDstIpAddrMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP subnet mask for Destination IP address.
This field is read-only and copy from it's Profile setting.
"
DEFVAL { 'FFFFFFFF'h }
::= { aclL3RuleEntry 8 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Source IP address to be matched with the packet. The default value will be zero, which means the rule don't care this condition.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Description 2
The IP subnet mask for Destination IP address. This field is read-only and copy from it's Profile setting.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copies
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: aclL3RuleSrcIpAddr
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"aclL3RuleSrcIpAddr",
"OBJECT-TYPE",
"SYNTAX",
"IpAddress",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Source IP address to be matched with the packet. The default value will be zero, which means the rule don't care this condition.\"",
"DEFVAL",
"{",
"'",
"00000000",
"'",
"h",
"}",
"::=",
"{",
"aclL3RuleEntry",
"8",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"IpAddress",
null
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Source IP address to be matched with the packet. The default value will be zero, which means the rule don't care this condition."
],
null,
null,
null,
[
"DEFVAL",
"'00000000'h"
]
]
}Module: DES-1210-28_AX
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel']}Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DES-1210-28_AX
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel']}Related source files and packages:
Status in source: current.
Names: aclL3RuleDstIpAddrMask
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"aclL3RuleDstIpAddrMask",
"OBJECT-TYPE",
"SYNTAX",
"IpAddress",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The IP subnet mask for Destination IP address. This field is read-only and copy from it's Profile setting. \"",
"DEFVAL",
"{",
"'",
"FFFFFFFF",
"'",
"h",
"}",
"::=",
"{",
"aclL3RuleEntry",
"8",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"IpAddress",
null
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The IP subnet mask for Destination IP address. This field is read-only and copy from it's Profile setting."
],
null,
null,
null,
[
"DEFVAL",
"'FFFFFFFF'h"
]
]
}Module: DES-1210-28_AX
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel']}Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DES-1210-28-AX
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel']}Vendor MIB copy from the Netdisco archive.
Module: DES-1210-28-AX
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.1 | aclL3RuleAccessID | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.2 | aclL3RuleProfileNo | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.3 | aclL3RuleProtocol | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.4 | aclL3RuleICMPMessageType, aclL3RuleProtocolMask | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.5 | aclL3RuleICMPMessageCode, aclL3RuleICMPMessageType | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.6 | aclL3RuleDstIpAddr, aclL3RuleICMPMessageCode | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.7 | aclL3RuleSrcIpAddr, aclL3RuleDstIpAddr | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.9 | aclL3RuleSrcIpAddrMask, aclL3RuleDstIpAddrMask | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.10 | aclL3RuleTcpUdpDstPort, aclL3RuleSrcIpAddrMask | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.11 | aclL3RuleTcpUdpSrcPort, aclL3RuleTcpUdpDstPort | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.12 | aclL3RuleTcpUdpDstPortMask, aclL3RuleTcpUdpSrcPort | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.13 | aclL3RuleTcpUdpSrcPortMask, aclL3RuleTcpUdpDstPortMask | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.14 | aclL3RuleTcpAckBit, aclL3RuleTcpUdpSrcPortMask | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.15 | aclL3RuleTcpRstBit, aclL3RuleTcpAckBit | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.16 | aclL3RuleTcpUrgBit, aclL3RuleTcpRstBit | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.17 | aclL3RuleTcpPshBit, aclL3RuleTcpUrgBit | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.18 | aclL3RuleTcpSynBit, aclL3RuleTcpPshBit | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.19 | aclL3RuleTcpFinBit, aclL3RuleTcpSynBit | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.20 | aclL3RuleDscp, aclL3RuleTcpFinBit | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.21 | aclL3RuleIgmpType, aclL3RuleDscp | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.22 | aclL3RulePortList, aclL3RuleIgmpType | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.23 | aclL3RuleAction, aclL3RulePortList | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.24 | aclL3RuleAction | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.25 | aclL3RuleStatus, aclL3RuleRateLimit | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.26 | aclL3RuleReplaceDSCP | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.15.3.1.1.27 | aclL3RuleStatus | 0 | 0 |