OID reference
1.3.6.1.4.1.171.10.75.5.6.1.1
The administrative module status requested by management for the RSTP Module. This enables or disables RSTP in the system. A value of 'enabled' (1) indicates that RSTP must be enabled in the device on all the ports. A value of 'disabled'(2) indicates that RSTP must be disabled in the device on all the ports.
Identification
{1 3 6 1 4 1 171 10 75 5 6 1 1}
| Value | Name |
|---|---|
| 1 | enabled |
| 2 | disabled |
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.171.10.75.5.6.1.1.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
rstpStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative module status requested by management for the RSTP
Module. This enables or disables RSTP in the system. A value of 'enabled'
(1) indicates that RSTP must be enabled in the device on all the ports.
A value of 'disabled'(2) indicates that RSTP must be disabled in the
device on all the ports."
::= {stpGlobal 1 }stpModuleStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative status requested by management for the MST
feature. The value enabled(1) indicates that Mst should be enabled
in the device on all ports. The value disabled(2) indicates that
Mst should be disabled in the device on all ports. The object can
be set to enabled(1) if and only if, fsMIMstSystemControl set to start."
::= { stpBridgeGlobal 1 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
The administrative module status requested by management for the RSTP Module. This enables or disables RSTP in the system. A value of 'enabled' (1) indicates that RSTP must be enabled in the device on all the ports. A value of 'disabled'(2) indicates that RSTP must be disabled in the device on all the ports.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copies
Description 2
The administrative status requested by management for the MST feature. The value enabled(1) indicates that Mst should be enabled in the device on all ports. The value disabled(2) indicates that Mst should be disabled in the device on all ports. The object can be set to enabled(1) if and only if, fsMIMstSystemControl set to start.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rstpStatus
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rstpStatus",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enabled",
"(",
"1",
")",
",",
"disabled",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The administrative module status requested by management for the RSTP Module. This enables or disables RSTP in the system. A value of 'enabled' (1) indicates that RSTP must be enabled in the device on all the ports. A value of 'disabled'(2) indicates that RSTP must be disabled in the device on all the ports.\"",
"::=",
"{",
"stpGlobal",
"1",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enabled",
1
],
[
"disabled",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The administrative module status requested by management for the RSTP Module. This enables or disables RSTP in the system. A value of 'enabled' (1) indicates that RSTP must be enabled in the device on all the ports. A value of 'disabled'(2) indicates that RSTP must be disabled in the device on all the ports."
],
null,
null,
null,
null
]
}Module: DES-1210-28_AX
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel']}Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DES-1210-28-AX
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel']}Related source files and packages:
Vendor MIB copy from the Netdisco archive.
Module: DES-1210-28-AX
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel']}Related source files and packages:
Status in source: current.
Names: stpModuleStatus
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"stpModuleStatus",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enabled",
"(",
"1",
")",
",",
"disabled",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The administrative status requested by management for the MST feature. The value enabled(1) indicates that Mst should be enabled in the device on all ports. The value disabled(2) indicates that Mst should be disabled in the device on all ports. The object can be set to enabled(1) if and only if, fsMIMstSystemControl set to start.\"",
"::=",
"{",
"stpBridgeGlobal",
"1",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enabled",
1
],
[
"disabled",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The administrative status requested by management for the MST feature. The value enabled(1) indicates that Mst should be enabled in the device on all ports. The value disabled(2) indicates that Mst should be disabled in the device on all ports. The object can be set to enabled(1) if and only if, fsMIMstSystemControl set to start."
],
null,
null,
null,
null
]
}Module: DES-1210-28_AX
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel']}Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DES-1210-28_AX
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.10.75.5.6.1.2 | stpVersion, stpProtocolVersion | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.6.1.3 | stpPriority, stpBridgePriority | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.6.1.4 | stpTxHoldCount | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.6.1.5 | stpProtocolSpecification, stpBridgeMaxAge | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.6.1.6 | stpTimeSinceTopologyChange, stpBridgeHelloTime | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.6.1.7 | stpTopChanges, stpBridgeForwardDelay | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.6.1.8 | stpDesignatedRoot, stpFowardBPDU | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.6.1.9 | stpRootCost, stpRootBridge | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.6.1.10 | stpRootPort, stpRootCost | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.6.1.11 | stpMaxAge | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.6.1.12 | stpHelloTime, stpForwardDelay | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.6.1.13 | stpHoldTime, stpRootPort | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.6.1.14 | stpForwardDelay | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.6.1.15 | stpBridgeMaxAge | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.6.1.16 | stpBridgeHelloTime | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.6.1.17 | stpBridgeForwardDelay | 0 | 0 |