OID reference
1.3.6.1.4.1.171.10.75.5.6.1.7
The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D specifies that the range for this parameter is related to the value of BridgeMaxAge. The granularity of this timer is specified to be 1 second. An agent may return a badValue error if a set is attempted to a value …
Identification
{1 3 6 1 4 1 171 10 75 5 6 1 7}
Definitions may combine these properties differently.
A counter is cumulative. To estimate a rate, subtract two readings and divide by the elapsed time; use the units stated in the MIB.
Counter values can wrap or reset. A decrease alone does not distinguish a wrap from a reset, and multiple wraps between readings cannot be recovered reliably. Check the device's discontinuity indicators when available.
Published counter width: 32 bits. Some source definitions have missing or unresolved types; check the source variants. SMIv2: Counter32 · Counter64
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.171.10.75.5.6.1.7.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
stpBridgeForwardDelay OBJECT-TYPE
SYNTAX Timeout (400..3000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1D specifies that the range for this
parameter is related to the value of
BridgeMaxAge. The granularity of this
timer is specified to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds."
DEFVAL {1500}
::= { stpBridgeGlobal 7 }stpTopChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of topology changes detected by
this bridge since the management entity was last
reset or initialized."
REFERENCE
"IEEE 802.1D-2004"
::= { stpGlobal 7 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D specifies that the range for this parameter is related to the value of BridgeMaxAge. The granularity of this timer is specified to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Description 2
The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copies
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: stpBridgeForwardDelay
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"stpBridgeForwardDelay",
"OBJECT-TYPE",
"SYNTAX",
"Timeout",
"(",
"400",
".",
".",
"3000",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D specifies that the range for this parameter is related to the value of BridgeMaxAge. The granularity of this timer is specified to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.\"",
"DEFVAL",
"{",
"1500",
"}",
"::=",
"{",
"stpBridgeGlobal",
"7",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Timeout",
[
"integerSubType",
[
[
400,
3000
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D specifies that the range for this parameter is related to the value of BridgeMaxAge. The granularity of this timer is specified to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds."
],
null,
null,
null,
[
"DEFVAL",
1500
]
]
}Module: DES-1210-28_AX
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel']}Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DES-1210-28_AX
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel']}Related source files and packages:
Status in source: current.
Names: stpTopChanges
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"stpTopChanges",
"OBJECT-TYPE",
"SYNTAX",
"Counter32",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The total number of topology changes detected by this bridge since the management entity was last reset or initialized.\"",
"REFERENCE",
"\"IEEE 802.1D-2004\"",
"::=",
"{",
"stpGlobal",
"7",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter32"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The total number of topology changes detected by this bridge since the management entity was last reset or initialized."
],
[
"REFERENCE",
"IEEE 802.1D-2004"
],
null,
null,
null
]
}Module: DES-1210-28_AX
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel']}Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DES-1210-28-AX
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel']}Vendor MIB copy from the Netdisco archive.
Module: DES-1210-28-AX
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.10.75.5.6.1.1 | rstpStatus, stpModuleStatus | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.6.1.2 | stpVersion, stpProtocolVersion | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.6.1.3 | stpPriority, stpBridgePriority | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.6.1.4 | stpTxHoldCount | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.6.1.5 | stpProtocolSpecification, stpBridgeMaxAge | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.6.1.6 | stpTimeSinceTopologyChange, stpBridgeHelloTime | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.6.1.8 | stpDesignatedRoot, stpFowardBPDU | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.6.1.9 | stpRootCost, stpRootBridge | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.6.1.10 | stpRootPort, stpRootCost | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.6.1.11 | stpMaxAge | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.6.1.12 | stpHelloTime, stpForwardDelay | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.6.1.13 | stpHoldTime, stpRootPort | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.6.1.14 | stpForwardDelay | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.6.1.15 | stpBridgeMaxAge | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.6.1.16 | stpBridgeHelloTime | 0 | 0 | |
| 1.3.6.1.4.1.171.10.75.5.6.1.17 | stpBridgeForwardDelay | 0 | 0 |