Description 1
The interface index for which the configuration in this entry applies. For all machines give maximum port number.
OID reference
1.3.6.1.4.1.171.10.76.28.1.35.1.1.1
The interface index for which the configuration in this entry applies. For all machines give maximum port number.
Identification
{1 3 6 1 4 1 171 10 76 28 1 35 1 1 1}
Definitions may combine these properties differently.
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In DGS-1210-28ME-AX, the row index cableDiagPortIndex is declared as Integer32. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.171.10.76.28.1.35.1.1.1.<cableDiagPortIndex>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.10.76.28.1.35.1.1.1
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
cableDiagPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..28)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index for which the configuration in this
entry applies.
For all machines give maximum port number."
::= { cableDiagEntry 1 }cableDiagPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface index for which the configuration in this
entry applies."
::= { cableDiagEntry 1 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
The interface index for which the configuration in this entry applies. For all machines give maximum port number.
Description 2
The interface index for which the configuration in this entry applies.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: cableDiagPortIndex
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"cableDiagPortIndex",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"1",
".",
".",
"28",
")",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The interface index for which the configuration in this entry applies. For all machines give maximum port number.\"",
"::=",
"{",
"cableDiagEntry",
"1",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
1,
28
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The interface index for which the configuration in this entry applies. For all machines give maximum port number."
],
null,
null,
null,
null
]
}Module: DGS-1210-28ME-AX
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress', 'TimeInterval', 'TimeStamp', 'TDomain', 'TAddress', 'DisplayString', 'RowPointer'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'Q-BRIDGE-MIB': ['VlanId'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel'], 'IANA-ADDRESS-FAMILY-NUMBERS-MIB': ['AddressFamilyNumbers']}Status in source: current.
Names: cableDiagPortIndex
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"cableDiagPortIndex",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The interface index for which the configuration in this entry applies.\"",
"::=",
"{",
"cableDiagEntry",
"1",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The interface index for which the configuration in this entry applies."
],
null,
null,
null,
null
]
}Module: DGS-1210-28ME_AX
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'Q-BRIDGE-MIB': ['VlanId'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel'], 'IANA-ADDRESS-FAMILY-NUMBERS-MIB': ['AddressFamilyNumbers']}Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DGS-1210-28ME_AX
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Unsigned32', 'TimeTicks', 'Counter32'], 'Q-BRIDGE-MIB': ['VlanId'], 'INET-ADDRESS-MIB': ['InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpSecurityLevel'], 'IANA-ADDRESS-FAMILY-NUMBERS-MIB': ['AddressFamilyNumbers']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.10.76.28.1.35.1.1.2 | cableDiagPortType | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.28.1.35.1.1.3 | cableDiagLinkStatus | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.28.1.35.1.1.4 | cableDiagPair1Status | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.28.1.35.1.1.5 | cableDiagPair2Status | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.28.1.35.1.1.6 | cableDiagPair3Status | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.28.1.35.1.1.7 | cableDiagPair4Status | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.28.1.35.1.1.8 | cableDiagPair1Length | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.28.1.35.1.1.9 | cableDiagPair2Length | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.28.1.35.1.1.10 | cableDiagPair3Length | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.28.1.35.1.1.11 | cableDiagPair4Length | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.28.1.35.1.1.12 | cableDiagAction | 0 | 0 | |
| 1.3.6.1.4.1.171.10.76.28.1.35.1.1.13 | cableDiagStatus | 0 | 0 |