OID reference
1.3.6.1.4.1.171.11.69.3.3.8.1.2
For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP addresses and the corresponding value of ifIndex for interfaces having no IP address.
Identification
{1 3 6 1 4 1 171 11 69 3 3 8 1 2}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In DES3828P-SWL3MGMT-MIB, the row index consists of these components in order:
swL3ospfIfIpAddress (IpAddress): four numeric subidentifiers, one per IPv4 address octet.swL3ospfAddressLessIf (Integer32): one numeric subidentifier for the non-negative value.An instance has the form .1.3.6.1.4.1.171.11.69.3.3.8.1.2.<swL3ospfIfIpAddress: four octets>.<swL3ospfAddressLessIf>. Use values present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.11.69.3.3.8.1.2
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
swL3ospfAddressLessIf OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For the purpose of easing the instancing of
addressed and addressless interfaces; This
variable takes the value 0 on interfaces with
IP addresses and the corresponding value of
ifIndex for interfaces having no IP address."
::= { swL3ospfIfEntry 2 }swL3ospfAddressLessIf OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For the purpose of easing the instancing of
addressed and addressless interfaces; This
variable takes the value 0 on interfaces with
IP Addresses, and the corresponding value of
ifIndex for interfaces having no IP Address."
::= { swL3ospfIfEntry 2 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP addresses and the corresponding value of ifIndex for interfaces having no IP address.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Description 2
For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces having no IP Address.
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: swL3ospfAddressLessIf
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swL3ospfAddressLessIf",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP addresses and the corresponding value of ifIndex for interfaces having no IP address.\"",
"::=",
"{",
"swL3ospfIfEntry",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP addresses and the corresponding value of ifIndex for interfaces having no IP address."
],
null,
null,
null,
null
]
}Module: DES3828P-SWL3MGMT-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex'], 'OSPF-MIB': ['TOSType', 'Metric', 'AreaID', 'RouterID', 'UpToMaxAge', 'HelloRange', 'PositiveInteger', 'Status', 'DesignatedRouterPriority'], 'SNMPv2-TC': ['PhysAddress', 'TruthValue', 'DisplayString', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32'], 'SW3800PRIMGMT-MIB': ['des3828P']}Related source files and packages:
Same file in DES-3800_v4.50.B12.mib.zip.
Same file in DES-3800_v4.50.B12.mib.zip.
Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DES3828P-SWL3MGMT-MIB
{'IF-MIB': ['InterfaceIndex'], 'OSPF-MIB': ['TOSType', 'Metric', 'AreaID', 'RouterID', 'UpToMaxAge', 'HelloRange', 'PositiveInteger', 'Status', 'DesignatedRouterPriority'], 'SNMPv2-TC': ['PhysAddress', 'TruthValue', 'DisplayString', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32'], 'SW3800PRIMGMT-MIB': ['des3828P']}Related source files and packages:
Status in source: current.
Names: swL3ospfAddressLessIf
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swL3ospfAddressLessIf",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces having no IP Address.\"",
"::=",
"{",
"swL3ospfIfEntry",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces having no IP Address."
],
null,
null,
null,
null
]
}Module: DES3828P-L3MGMT-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex'], 'OSPF-MIB': ['TOSType', 'Metric', 'AreaID', 'RouterID', 'UpToMaxAge', 'HelloRange', 'PositiveInteger', 'Status', 'DesignatedRouterPriority'], 'SNMPv2-TC': ['PhysAddress', 'TruthValue', 'DisplayString', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32'], 'SW3800PRIMGMT-MIB': ['des3828P']}Related source files and packages:
Module: DES3828P-L3MGMT-MIB
{'OSPF-MIB': ['TOSType', 'Metric', 'AreaID', 'RouterID', 'UpToMaxAge', 'HelloRange', 'PositiveInteger', 'Status', 'DesignatedRouterPriority'], 'SNMPv2-TC': ['PhysAddress', 'TruthValue', 'DisplayString', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'NOTIFICATION-TYPE', 'Integer32'], 'SW3800PRIMGMT-MIB': ['des3828P']}Related source files and packages:
Module: DES3828P-L3MGMT-MIB
{'OSPF-MIB': ['TOSType', 'Metric', 'AreaID', 'RouterID', 'UpToMaxAge', 'HelloRange', 'PositiveInteger', 'Status', 'DesignatedRouterPriority'], 'SNMPv2-TC': ['PhysAddress', 'TruthValue', 'DisplayString', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'NOTIFICATION-TYPE', 'Integer32'], 'SW3800PRIMGMT-MIB': ['des3828P']}Related source files and packages:
Same file in DES3852R2_2-00-B16-MIB.zip.
Registration