Description 1
In order to coordinate the timing of protection switches at multiple layers.
Sources for this description
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.171.12.78.3.1.1.10
In order to coordinate the timing of protection switches at multiple layers.
Identification
{1 3 6 1 4 1 171 12 78 3 1 1 10}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In ERPS-MIB, the row index swERPSMgmtRAPSVlanId is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.171.12.78.3.1.1.10.<swERPSMgmtRAPSVlanId>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.12.78.3.1.1.10
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 4 distinct definitions; some records may not include a definition.
swERPSMgmtRAPSHoldOffTime OBJECT-TYPE
SYNTAX INTEGER (0..10000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"In order to coordinate the timing of protection switches at multiple layers."
::= { swERPSMgmtRAPSVlanEntry 10 }swERPSMgmtRAPSHoldOffTime OBJECT-TYPE
SYNTAX INTEGER (0..10000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"In order to coordinate timing of protection switches at multiple layers."
::= { swERPSMgmtRAPSVlanEntry 10 }swERPSMgmtRAPSHoldOffTime OBJECT-TYPE
SYNTAX INTEGER (0..10000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"In order to coordinate timing of protection switches at
multiple layers."
::= { swERPSMgmtRAPSVlanEntry 10 }swERPSMgmtRAPSHoldOffTime OBJECT-TYPE
SYNTAX INTEGER (0..10000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This timer is used to filter out intermittent link faults when link failures occur during
the protection switching process. When a ring node detects a link failure, it will start
the holdoff timer and report the link failure event (R-APS BPDU with SF flag) after the
link failure is confirmed within the specified time period."
::= { swERPSMgmtRAPSVlanEntry 10 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
In order to coordinate the timing of protection switches at multiple layers.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Description 2
In order to coordinate timing of protection switches at multiple layers.
Description 3
This timer is used to filter out intermittent link faults when link failures occur during the protection switching process. When a ring node detects a link failure, it will start the holdoff timer and report the link failure event (R-APS BPDU with SF flag) after the link failure is confirmed within the specified time period.
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: swERPSMgmtRAPSHoldOffTime
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swERPSMgmtRAPSHoldOffTime",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"0",
".",
".",
"10000",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"In order to coordinate the timing of protection switches at multiple layers.\"",
"::=",
"{",
"swERPSMgmtRAPSVlanEntry",
"10",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
0,
10000
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"In order to coordinate the timing of protection switches at multiple layers."
],
null,
null,
null,
null
]
}Module: ERPS-MIB
See published definition above
{'SNMPv2-TC': ['RowStatus', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE'], 'Q-BRIDGE-MIB': ['VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt']}Related source files and packages:
Same file in DGS-3710-12C_A1_FW_v1.00.029_MIB_v1.00.029.rar.
Same file in DGS-3710-12C_A1_FW_v1.00.029_MIB_v1.00.029.rar.
Same file in DGS-3620-r3.0-mib-20171011.zip.
Same file in DGS-3620-r3.0-mib-20171011.zip.
Module: ERPS-MIB
{'SNMPv2-TC': ['RowStatus', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE'], 'Q-BRIDGE-MIB': ['VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt']}Related source files and packages:
Same file in DGS-3120 Series_B1_MIB_of_FW_v3.10.512.zip.
Same file in DGS-3120_BX_MIB_of_FW_v3.10.512.zip.
Same file in DGS-3120_B1_MIB_of_FW_v4.00.015.rar.
Same file in DGS-3120_AX_MIB_of_FW_v3.10.012.zip.
Vendor MIB copy from the Observium Community archive. D-Link support.
Module: ERPS-MIB
{'SNMPv2-TC': ['RowStatus', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE'], 'Q-BRIDGE-MIB': ['VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt']}Related source files and packages:
Status in source: current.
Names: swERPSMgmtRAPSHoldOffTime
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swERPSMgmtRAPSHoldOffTime",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"0",
".",
".",
"10000",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"In order to coordinate timing of protection switches at multiple layers.\"",
"::=",
"{",
"swERPSMgmtRAPSVlanEntry",
"10",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
0,
10000
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"In order to coordinate timing of protection switches at multiple layers."
],
null,
null,
null,
null
]
}Module: ERPS-MIB
See published definition above
{'SNMPv2-TC': ['RowStatus', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE'], 'Q-BRIDGE-MIB': ['VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt']}Related source files and packages:
Module: ERPS-MIB
{'SNMPv2-TC': ['RowStatus', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE'], 'Q-BRIDGE-MIB': ['VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt']}Related source files and packages:
Same file in DES-3200_MIB_20150731.zip.
Same file in DES-3200_MIB_20150731.zip.
Same file in DES-3200_MIB_20150306.zip.
Same file in DES-3200_MIB_20150306.zip.
Module: ERPS-MIB
{'SNMPv2-TC': ['RowStatus', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE'], 'Q-BRIDGE-MIB': ['VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt']}Related source files and packages:
Same file in DGS-3600_Series_FW_v3.00.B14_MIB.7z.
Same file in DGS-3600_Series_FW_v3.00.B14_MIB.7z.
Same file in DGS-3600_Series_FW_v3.00.B14_MIB.7z.
Same file in DGS3600_Series_FW_v3.00.B14_MIB.7z.
Module: ERPS-MIB
See published definition above
{'SNMPv2-TC': ['RowStatus', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE'], 'Q-BRIDGE-MIB': ['VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt']}Related source files and packages:
Same file in DWS3160_MIB_new_01.04.2015.zip.
Same file in DWS3160_MIB_new_01.04.2015.zip.
Same file in DGS-3120_MIB_of_FW_v2.50.015.rar.
Same file in DGS-3120_MIB_of_FW_v2.00.010.zip.rar.
Status in source: current.
Names: swERPSMgmtRAPSHoldOffTime
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swERPSMgmtRAPSHoldOffTime",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"0",
".",
".",
"10000",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This timer is used to filter out intermittent link faults when link failures occur during the protection switching process. When a ring node detects a link failure, it will start the holdoff timer and report the link failure event (R-APS BPDU with SF flag) after the link failure is confirmed within the specified time period.\"",
"::=",
"{",
"swERPSMgmtRAPSVlanEntry",
"10",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
0,
10000
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This timer is used to filter out intermittent link faults when link failures occur during the protection switching process. When a ring node detects a link failure, it will start the holdoff timer and report the link failure event (R-APS BPDU with SF flag) after the link failure is confirmed within the specified time period."
],
null,
null,
null,
null
]
}Module: ERPS-MIB
See published definition above
{'SNMPv2-TC': ['RowStatus', 'MacAddress', 'TruthValue', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE'], 'Q-BRIDGE-MIB': ['VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt']}Related source files and packages:
Same file in DGS3420_Mib_3.0.3.zip.
Same file in DGS-3420_MIB_3_00_B008.zip.
Same file in DGS3420_Mib_3.0.3.zip.
Same file in DGS-3420_MIB_3_00_B008.zip.
Module: ERPS-MIB
{'SNMPv2-TC': ['RowStatus', 'MacAddress', 'TruthValue', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE'], 'Q-BRIDGE-MIB': ['VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt']}Related source files and packages:
Same file in DGS-3000_R4.00_mibs_20171229_2.zip.
Same file in DGS-3000_R4.00_mibs_20171229_2.zip.
Same file in DGS-3000_R4.00_mibs_20171229_2.zip.
Same file in DGS-3000_R4.00_mibs_20171229_2.zip.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.12.78.3.1.1.1 | swERPSMgmtRAPSVlanId | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.2 | swERPSMgmtRAPSWestPort | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.3 | swERPSMgmtRAPSWestPortState | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.4 | swERPSMgmtRAPSEastPort | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.5 | swERPSMgmtRAPSEastPortState | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.6 | swERPSMgmtRAPSRPLPort | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.7 | swERPSMgmtRAPSRPLOwnerAdminState | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.8 | swERPSMgmtRAPSProtectionVlan | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.9 | swERPSMgmtRAPSRingMEL | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.11 | swERPSMgmtRAPSGuardTime | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.12 | swERPSMgmtRAPSWTRTime | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.13 | swERPSMgmtRAPSRingState | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.14 | swERPSMgmtRAPSRingAdminState | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.15 | swERPSMgmtRAPSRPLOwnerOperStatus | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.16 | swERPSMgmtRAPSProtectionVlanRangeList1to64 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.17 | swERPSMgmtRAPSProtectionVlanRangeList65to128 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.18 | swERPSMgmtRAPSProtectionVlanRangeList129to192 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.19 | swERPSMgmtRAPSProtectionVlanRangeList193to256 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.20 | swERPSMgmtRAPSProtectionVlanRangeList257to320 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.21 | swERPSMgmtRAPSProtectionVlanRangeList321to384 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.22 | swERPSMgmtRAPSProtectionVlanRangeList385to448 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.23 | swERPSMgmtRAPSProtectionVlanRangeList449to512 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.24 | swERPSMgmtRAPSRevertive | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.25 | swERPSMgmtRAPSOperWestPort | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.26 | swERPSMgmtRAPSOperEastPort | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.27 | swERPSMgmtRAPSOperRPLPort | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.28 | swERPSMgmtRAPSRPLOwnerOperState | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.100 | swERPSMgmtRAPSRowStatus | 0 | 0 |