OID reference
1.3.6.1.4.1.171.12.78.3.1.1.24
The object is used to enable or disable the revertive operation of a special ring. When revertive is disabled, the traffic link is allowed to use the RPL, after recovering from a failure. When revertive is enabled, the traffic link is restored to the working transport link.
Identification
{1 3 6 1 4 1 171 12 78 3 1 1 24}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 1 | disable | 2 |
| 1 | enabled | 1 |
| 2 | disabled | 1 |
| 2 | enable | 2 |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In ERPS-MIB, the row index swERPSMgmtRAPSVlanId is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.171.12.78.3.1.1.24.<swERPSMgmtRAPSVlanId>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.12.78.3.1.1.24
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 3 distinct definitions; some records may not include a definition.
swERPSMgmtRAPSRevertive OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object is used to enable or disable the revertive operation of a special
ring. When revertive is disabled, the traffic link is allowed to use the RPL,
after recovering from a failure. When revertive is enabled, the traffic
link is restored to the working transport link."
DEFVAL{enabled}
::= { swERPSMgmtRAPSVlanEntry 24 }swERPSMgmtRAPSRevertive OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object is used to enable or disable the revertive operation of a special
ring. When revertive is disabled, the traffic link is allowed to use the RPL,
after revovering from a failure. When revertive is enabled, the traffic
link is restored to the working transport link."
DEFVAL{enabled}
::= { swERPSMgmtRAPSVlanEntry 24 }swERPSMgmtRAPSRevertive OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object indicates the revertive mode of a special ring. In
none revertive mode, the traffic link is allowed to use the RPL,
after revovering from a failure. In auto revertive mode, the traffic
link is restored to the working transport link."
DEFVAL{enable}
::= { swERPSMgmtRAPSVlanEntry 24 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
The object is used to enable or disable the revertive operation of a special ring. When revertive is disabled, the traffic link is allowed to use the RPL, after recovering from a failure. When revertive is enabled, the traffic link is restored to the working transport link.
Description 2
The object is used to enable or disable the revertive operation of a special ring. When revertive is disabled, the traffic link is allowed to use the RPL, after revovering from a failure. When revertive is enabled, the traffic link is restored to the working transport link.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Description 3
The object indicates the revertive mode of a special ring. In none revertive mode, the traffic link is allowed to use the RPL, after revovering from a failure. In auto revertive mode, the traffic link is restored to the working transport link.
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: swERPSMgmtRAPSRevertive
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swERPSMgmtRAPSRevertive",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enabled",
"(",
"1",
")",
",",
"disabled",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The object is used to enable or disable the revertive operation of a special ring. When revertive is disabled, the traffic link is allowed to use the RPL, after recovering from a failure. When revertive is enabled, the traffic link is restored to the working transport link.\"",
"DEFVAL",
"{",
"enabled",
"}",
"::=",
"{",
"swERPSMgmtRAPSVlanEntry",
"24",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enabled",
1
],
[
"disabled",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The object is used to enable or disable the revertive operation of a special ring. When revertive is disabled, the traffic link is allowed to use the RPL, after recovering from a failure. When revertive is enabled, the traffic link is restored to the working transport link."
],
null,
null,
null,
[
"DEFVAL",
"enabled"
]
]
}Module: ERPS-MIB
See published definition above
{'SNMPv2-TC': ['RowStatus', 'MacAddress', 'TruthValue', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE'], 'Q-BRIDGE-MIB': ['VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt']}Related source files and packages:
Same file in DGS3420_Mib_3.0.3.zip.
Same file in DGS-3420_MIB_3_00_B008.zip.
Same file in DGS3420_Mib_3.0.3.zip.
Same file in DGS-3420_MIB_3_00_B008.zip.
Module: ERPS-MIB
{'SNMPv2-TC': ['RowStatus', 'MacAddress', 'TruthValue', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE'], 'Q-BRIDGE-MIB': ['VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt']}Related source files and packages:
Same file in DGS-3000_R4.00_mibs_20171229_2.zip.
Same file in DGS-3000_R4.00_mibs_20171229_2.zip.
Same file in DGS-3000_R4.00_mibs_20171229_2.zip.
Same file in DGS-3000_R4.00_mibs_20171229_2.zip.
Status in source: current.
Names: swERPSMgmtRAPSRevertive
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swERPSMgmtRAPSRevertive",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enabled",
"(",
"1",
")",
",",
"disabled",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The object is used to enable or disable the revertive operation of a special ring. When revertive is disabled, the traffic link is allowed to use the RPL, after revovering from a failure. When revertive is enabled, the traffic link is restored to the working transport link.\"",
"DEFVAL",
"{",
"enabled",
"}",
"::=",
"{",
"swERPSMgmtRAPSVlanEntry",
"24",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enabled",
1
],
[
"disabled",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The object is used to enable or disable the revertive operation of a special ring. When revertive is disabled, the traffic link is allowed to use the RPL, after revovering from a failure. When revertive is enabled, the traffic link is restored to the working transport link."
],
null,
null,
null,
[
"DEFVAL",
"enabled"
]
]
}Module: ERPS-MIB
See published definition above
{'SNMPv2-TC': ['RowStatus', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE'], 'Q-BRIDGE-MIB': ['VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt']}Related source files and packages:
Same file in DGS-3710-12C_A1_FW_v1.00.029_MIB_v1.00.029.rar.
Same file in DGS-3710-12C_A1_FW_v1.00.029_MIB_v1.00.029.rar.
Same file in DGS-3620-r3.0-mib-20171011.zip.
Same file in DGS-3620-r3.0-mib-20171011.zip.
Module: ERPS-MIB
{'SNMPv2-TC': ['RowStatus', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE'], 'Q-BRIDGE-MIB': ['VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt']}Related source files and packages:
Same file in DGS-3120 Series_B1_MIB_of_FW_v3.10.512.zip.
Same file in DGS-3120_BX_MIB_of_FW_v3.10.512.zip.
Same file in DGS-3120_B1_MIB_of_FW_v4.00.015.rar.
Same file in DGS-3120_AX_MIB_of_FW_v3.10.012.zip.
Vendor MIB copy from the Observium Community archive. D-Link support.
Module: ERPS-MIB
{'SNMPv2-TC': ['RowStatus', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE'], 'Q-BRIDGE-MIB': ['VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt']}Related source files and packages:
Status in source: current.
Names: swERPSMgmtRAPSRevertive
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swERPSMgmtRAPSRevertive",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"disable",
"(",
"1",
")",
",",
"enable",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The object indicates the revertive mode of a special ring. In none revertive mode, the traffic link is allowed to use the RPL, after revovering from a failure. In auto revertive mode, the traffic link is restored to the working transport link.\"",
"DEFVAL",
"{",
"enable",
"}",
"::=",
"{",
"swERPSMgmtRAPSVlanEntry",
"24",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"disable",
1
],
[
"enable",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The object indicates the revertive mode of a special ring. In none revertive mode, the traffic link is allowed to use the RPL, after revovering from a failure. In auto revertive mode, the traffic link is restored to the working transport link."
],
null,
null,
null,
[
"DEFVAL",
"enable"
]
]
}Module: ERPS-MIB
See published definition above
{'SNMPv2-TC': ['RowStatus', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE'], 'Q-BRIDGE-MIB': ['VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt']}Related source files and packages:
Same file in DWS3160_MIB_new_01.04.2015.zip.
Same file in DWS3160_MIB_new_01.04.2015.zip.
Same file in DGS-3120_MIB_of_FW_v2.50.015.rar.
Same file in DGS-3120_MIB_of_FW_v2.00.010.zip.rar.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.12.78.3.1.1.1 | swERPSMgmtRAPSVlanId | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.2 | swERPSMgmtRAPSWestPort | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.3 | swERPSMgmtRAPSWestPortState | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.4 | swERPSMgmtRAPSEastPort | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.5 | swERPSMgmtRAPSEastPortState | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.6 | swERPSMgmtRAPSRPLPort | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.7 | swERPSMgmtRAPSRPLOwnerAdminState | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.8 | swERPSMgmtRAPSProtectionVlan | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.9 | swERPSMgmtRAPSRingMEL | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.10 | swERPSMgmtRAPSHoldOffTime | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.11 | swERPSMgmtRAPSGuardTime | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.12 | swERPSMgmtRAPSWTRTime | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.13 | swERPSMgmtRAPSRingState | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.14 | swERPSMgmtRAPSRingAdminState | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.15 | swERPSMgmtRAPSRPLOwnerOperStatus | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.16 | swERPSMgmtRAPSProtectionVlanRangeList1to64 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.17 | swERPSMgmtRAPSProtectionVlanRangeList65to128 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.18 | swERPSMgmtRAPSProtectionVlanRangeList129to192 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.19 | swERPSMgmtRAPSProtectionVlanRangeList193to256 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.20 | swERPSMgmtRAPSProtectionVlanRangeList257to320 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.21 | swERPSMgmtRAPSProtectionVlanRangeList321to384 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.22 | swERPSMgmtRAPSProtectionVlanRangeList385to448 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.23 | swERPSMgmtRAPSProtectionVlanRangeList449to512 | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.25 | swERPSMgmtRAPSOperWestPort | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.26 | swERPSMgmtRAPSOperEastPort | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.27 | swERPSMgmtRAPSOperRPLPort | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.28 | swERPSMgmtRAPSRPLOwnerOperState | 0 | 0 | |
| 1.3.6.1.4.1.171.12.78.3.1.1.100 | swERPSMgmtRAPSRowStatus | 0 | 0 |