OID reference
1.3.6.1.4.1.171.12.89.4.1
This table is used to configure the flow-based metering function. The access rule must first be created before the parameters of this function can be applied. Users may set the preferred bandwidth for this rule, in Kbps; once the bandwidth has been exceeded, overflow packets will be either dropped or set for a drop pr…
Identification
{1 3 6 1 4 1 171 12 89 4 1}
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
swEgressAclMeterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwEgressAclMeterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the flow-based metering function.
The access rule must first be created before the parameters of this
function can be applied. Users may set the preferred bandwidth for
this rule, in Kbps; once the bandwidth has been exceeded, overflow
packets will be either dropped or set for a drop precedence,
depending on user configuration."
::= { swEgressAclMeteringMgmt 1 }swEgressAclMeterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwEgressAclMeterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the flow-based metering function.
The access rule must first be created before the parameters of this
function can be applied. Users may set the preferred bandwidth for
this rule, in Kbps; once the bandwidth has been exceeded, overflow
packets will be either dropped or set for a drop precedence,
depending on user configuration."
::= { swEgressAclMeteringMgmt 1 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This table is used to configure the flow-based metering function. The access rule must first be created before the parameters of this function can be applied. Users may set the preferred bandwidth for this rule, in Kbps; once the bandwidth has been exceeded, overflow packets will be either dropped or set for a drop precedence, depending on user configuration.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: swEgressAclMeterTable
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swEgressAclMeterTable",
"OBJECT-TYPE",
"SYNTAX",
"SEQUENCE",
"OF",
"SwEgressAclMeterEntry",
"MAX-ACCESS",
"not-accessible",
"STATUS",
"current",
"DESCRIPTION",
"\"This table is used to configure the flow-based metering function. The access rule must first be created before the parameters of this function can be applied. Users may set the preferred bandwidth for this rule, in Kbps; once the bandwidth has been exceeded, overflow packets will be either dropped or set for a drop precedence, depending on user configuration.\"",
"::=",
"{",
"swEgressAclMeteringMgmt",
"1",
"}"
],
"syntax_tree": [
[
"conceptualTable",
[
"row",
"SwEgressAclMeterEntry"
]
],
null,
[
"MaxAccessPart",
"not-accessible"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This table is used to configure the flow-based metering function. The access rule must first be created before the parameters of this function can be applied. Users may set the preferred bandwidth for this rule, in Kbps; once the bandwidth has been exceeded, overflow packets will be either dropped or set for a drop precedence, depending on user configuration."
],
null,
null,
null,
null
]
}Module: EGRESSACL-MIB
See published definition above
{'IPV6-TC': ['Ipv6Address'], 'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Same file in DWS3160_MIB_new_01.04.2015.zip.
Same file in DWS3160_MIB_new_01.04.2015.zip.
Same file in DGS-3620_Series_FW_v2.50.017_MIB.7z.
Same file in DGS-3620_Series_FW_v2.00.015_MIB.zip.
Module: EGRESSACL-MIB
{'IPV6-TC': ['Ipv6Address'], 'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Same file in DGS-3620-r3.0-mib-20171011.zip.
Same file in DGS-3620-r3.0-mib-20171011.zip.
Same file in DGS-3620_Series_FW_v2.60.016_MIB.7z.
Same file in DGS-3620-r3.0-mib-20171011.zip.
Vendor MIB copy from the Observium Community archive. D-Link support.
Module: EGRESSACL-MIB
See published definition above
{'IPV6-TC': ['Ipv6Address'], 'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.12.89.4.1.1 | swEgressAclMeterEntry | 31 | 31 |
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.12.89.4.2 | swEgressAclRateTable | 1 | 8 | |
| 1.3.6.1.4.1.171.12.89.4.3 | swEgressAclMeteringNumOfEntryInUse | 0 | 0 |