OID reference
1.3.6.1.4.1.171.12.89.4.2
This table is used to configure the single rate two color metering function. The egress access rule must first be created before the parameters of this function can be applied. Users may set the preferred bandwidth for this rule, in Kbps; once the bandwidth has been exceeded, overflow packets will be either dropped or…
Identification
{1 3 6 1 4 1 171 12 89 4 2}
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
swEgressAclRateTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwEgressAclRateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the single rate two color metering function.
The egress access rule must first be created before the parameters of this
function can be applied. Users may set the preferred bandwidth for
this rule, in Kbps; once the bandwidth has been exceeded, overflow
packets will be either dropped or set for a drop precedence,
depending on user configuration."
::= { swEgressAclMeteringMgmt 2 }swEgressAclRateTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwEgressAclRateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to configure the single rate two color metering function.
The egress access rule must first be created before the parameters of this
function can be applied. Users may set the preferred bandwidth for
this rule, in Kbps; once the bandwidth has been exceeded, overflow
packets will be either dropped or set for a drop precedence,
depending on user configuration."
::= { swEgressAclMeteringMgmt 2 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This table is used to configure the single rate two color metering function. The egress access rule must first be created before the parameters of this function can be applied. Users may set the preferred bandwidth for this rule, in Kbps; once the bandwidth has been exceeded, overflow packets will be either dropped or set for a drop precedence, depending on user configuration.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: swEgressAclRateTable
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swEgressAclRateTable",
"OBJECT-TYPE",
"SYNTAX",
"SEQUENCE",
"OF",
"SwEgressAclRateEntry",
"MAX-ACCESS",
"not-accessible",
"STATUS",
"current",
"DESCRIPTION",
"\"This table is used to configure the single rate two color metering function. The egress access rule must first be created before the parameters of this function can be applied. Users may set the preferred bandwidth for this rule, in Kbps; once the bandwidth has been exceeded, overflow packets will be either dropped or set for a drop precedence, depending on user configuration.\"",
"::=",
"{",
"swEgressAclMeteringMgmt",
"2",
"}"
],
"syntax_tree": [
[
"conceptualTable",
[
"row",
"SwEgressAclRateEntry"
]
],
null,
[
"MaxAccessPart",
"not-accessible"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This table is used to configure the single rate two color metering function. The egress access rule must first be created before the parameters of this function can be applied. Users may set the preferred bandwidth for this rule, in Kbps; once the bandwidth has been exceeded, overflow packets will be either dropped or set for a drop precedence, depending on user configuration."
],
null,
null,
null,
null
]
}Module: EGRESSACL-MIB
See published definition above
{'IPV6-TC': ['Ipv6Address'], 'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Same file in DWS3160_MIB_new_01.04.2015.zip.
Same file in DWS3160_MIB_new_01.04.2015.zip.
Same file in DGS-3620_Series_FW_v2.50.017_MIB.7z.
Same file in DGS-3620_Series_FW_v2.00.015_MIB.zip.
Module: EGRESSACL-MIB
{'IPV6-TC': ['Ipv6Address'], 'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Same file in DGS-3620-r3.0-mib-20171011.zip.
Same file in DGS-3620-r3.0-mib-20171011.zip.
Same file in DGS-3620_Series_FW_v2.60.016_MIB.7z.
Same file in DGS-3620-r3.0-mib-20171011.zip.
Vendor MIB copy from the Observium Community archive. D-Link support.
Module: EGRESSACL-MIB
See published definition above
{'IPV6-TC': ['Ipv6Address'], 'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.12.89.4.2.1 | swEgressAclRateEntry | 7 | 7 |
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.12.89.4.1 | swEgressAclMeterTable | 1 | 32 | |
| 1.3.6.1.4.1.171.12.89.4.3 | swEgressAclMeteringNumOfEntryInUse | 0 | 0 |