OID reference

swACLPktContRuleEnableReplaceDscp

1.3.6.1.4.1.171.12.9.3.3.1.11

Description

Specifies if the switch will change priorities of packets that match the access profile DSCP field or not.

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.171.12.9.3.3.1 (swACLPktContRuleEntry)
Node code
11
Node names
  • swACLPktContRuleEnableReplaceDscp
  • swACLPktContRuleOffsetIndex2
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.171.12.9.3.3.1.11
URN notation
urn:oid:1.3.6.1.4.1.171.12.9.3.3.1.11
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 171 12 9 3 3 1 11}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) dlink(171) dlink-common-mgmt(12) swAclMgmtMIB(9) swAclCtrl(3) swACLPktContRuleTable(3) swACLPktContRuleEntry(1) swACLPktContRuleEnableReplaceDscp(11)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) dlink(171) dlink-common-mgmt(12) swAclMgmtMIB(9) swAclCtrl(3) swACLPktContRuleTable(3) swACLPktContRuleEntry(1) swACLPktContRuleOffsetIndex2(11)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) dlink(171) dlink-common-mgmt(12) swAclMgmtMIB(9) swAclRuleMgmt(3) swACLPktContRuleTable(3) swACLPktContRuleEntry(1) swACLPktContRuleEnableReplaceDscp(11)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) dlink(171) dlink-common-mgmt(12) swAclMgmtMIB(9) swAclRuleMgmt(3) swACLPktContRuleTable(3) swACLPktContRuleEntry(1) swACLPktContRuleOffsetIndex2(11)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) dlink(171) nmsModules(12) swAclMgmtMIB(9) swAclCtrl(3) swACLPktContRuleTable(3) swACLPktContRuleEntry(1) swACLPktContRuleEnableReplaceDscp(11)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) dlink(171) nmsModules(12) swAclMgmtMIB(9) swAclCtrl(3) swACLPktContRuleTable(3) swACLPktContRuleEntry(1) swACLPktContRuleOffsetIndex2(11)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) dlink(171) nmsModules(12) swAclMgmtMIB(9) swAclRuleMgmt(3) swACLPktContRuleTable(3) swACLPktContRuleEntry(1) swACLPktContRuleEnableReplaceDscp(11)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) dlink(171) nmsModules(12) swAclMgmtMIB(9) swAclRuleMgmt(3) swACLPktContRuleTable(3) swACLPktContRuleEntry(1) swACLPktContRuleOffsetIndex2(11)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) d-link(171) dlink-common-mgmt(12) swAclMgmtMIB(9) swAclCtrl(3) swACLPktContRuleTable(3) swACLPktContRuleEntry(1) swACLPktContRuleEnableReplaceDscp(11)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) d-link(171) dlink-common-mgmt(12) swAclMgmtMIB(9) swAclCtrl(3) swACLPktContRuleTable(3) swACLPktContRuleEntry(1) swACLPktContRuleOffsetIndex2(11)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) d-link(171) dlink-common-mgmt(12) swAclMgmtMIB(9) swAclRuleMgmt(3) swACLPktContRuleTable(3) swACLPktContRuleEntry(1) swACLPktContRuleEnableReplaceDscp(11)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) d-link(171) dlink-common-mgmt(12) swAclMgmtMIB(9) swAclRuleMgmt(3) swACLPktContRuleTable(3) swACLPktContRuleEntry(1) swACLPktContRuleOffsetIndex2(11)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) d-link(171) nmsModules(12) swAclMgmtMIB(9) swAclCtrl(3) swACLPktContRuleTable(3) swACLPktContRuleEntry(1) swACLPktContRuleEnableReplaceDscp(11)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) d-link(171) nmsModules(12) swAclMgmtMIB(9) swAclCtrl(3) swACLPktContRuleTable(3) swACLPktContRuleEntry(1) swACLPktContRuleOffsetIndex2(11)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) d-link(171) nmsModules(12) swAclMgmtMIB(9) swAclRuleMgmt(3) swACLPktContRuleTable(3) swACLPktContRuleEntry(1) swACLPktContRuleEnableReplaceDscp(11)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) d-link(171) nmsModules(12) swAclMgmtMIB(9) swAclRuleMgmt(3) swACLPktContRuleTable(3) swACLPktContRuleEntry(1) swACLPktContRuleOffsetIndex2(11)}
  • Additional combinations skipped.
OID-IRI notation
  • /1/3/6/1/4/1/171/12/9/3/3/1/11
  • /ISO/Identified-Organization/6/1/4/1/171/12/9/3/3/1/11
  • /ISO/3/6/1/4/1/171/12/9/3/3/1/11
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/dlink/dlink-common-mgmt/swAclMgmtMIB/swAclCtrl/swACLPktContRuleTable/swACLPktContRuleEntry/swACLPktContRuleEnableReplaceDscp
  • /iso/identified-organization/dod/internet/private/enterprise/dlink/dlink-common-mgmt/swAclMgmtMIB/swAclCtrl/swACLPktContRuleTable/swACLPktContRuleEntry/swACLPktContRuleOffsetIndex2
  • /iso/identified-organization/dod/internet/private/enterprise/dlink/dlink-common-mgmt/swAclMgmtMIB/swAclRuleMgmt/swACLPktContRuleTable/swACLPktContRuleEntry/swACLPktContRuleEnableReplaceDscp
  • /iso/identified-organization/dod/internet/private/enterprise/dlink/dlink-common-mgmt/swAclMgmtMIB/swAclRuleMgmt/swACLPktContRuleTable/swACLPktContRuleEntry/swACLPktContRuleOffsetIndex2
  • /iso/identified-organization/dod/internet/private/enterprise/dlink/nmsModules/swAclMgmtMIB/swAclCtrl/swACLPktContRuleTable/swACLPktContRuleEntry/swACLPktContRuleEnableReplaceDscp
  • /iso/identified-organization/dod/internet/private/enterprise/dlink/nmsModules/swAclMgmtMIB/swAclCtrl/swACLPktContRuleTable/swACLPktContRuleEntry/swACLPktContRuleOffsetIndex2
  • /iso/identified-organization/dod/internet/private/enterprise/dlink/nmsModules/swAclMgmtMIB/swAclRuleMgmt/swACLPktContRuleTable/swACLPktContRuleEntry/swACLPktContRuleEnableReplaceDscp
  • /iso/identified-organization/dod/internet/private/enterprise/dlink/nmsModules/swAclMgmtMIB/swAclRuleMgmt/swACLPktContRuleTable/swACLPktContRuleEntry/swACLPktContRuleOffsetIndex2
  • /iso/identified-organization/dod/internet/private/enterprise/d-link/dlink-common-mgmt/swAclMgmtMIB/swAclCtrl/swACLPktContRuleTable/swACLPktContRuleEntry/swACLPktContRuleEnableReplaceDscp
  • /iso/identified-organization/dod/internet/private/enterprise/d-link/dlink-common-mgmt/swAclMgmtMIB/swAclCtrl/swACLPktContRuleTable/swACLPktContRuleEntry/swACLPktContRuleOffsetIndex2
  • /iso/identified-organization/dod/internet/private/enterprise/d-link/dlink-common-mgmt/swAclMgmtMIB/swAclRuleMgmt/swACLPktContRuleTable/swACLPktContRuleEntry/swACLPktContRuleEnableReplaceDscp
  • /iso/identified-organization/dod/internet/private/enterprise/d-link/dlink-common-mgmt/swAclMgmtMIB/swAclRuleMgmt/swACLPktContRuleTable/swACLPktContRuleEntry/swACLPktContRuleOffsetIndex2
  • /iso/identified-organization/dod/internet/private/enterprise/d-link/nmsModules/swAclMgmtMIB/swAclCtrl/swACLPktContRuleTable/swACLPktContRuleEntry/swACLPktContRuleEnableReplaceDscp
  • /iso/identified-organization/dod/internet/private/enterprise/d-link/nmsModules/swAclMgmtMIB/swAclCtrl/swACLPktContRuleTable/swACLPktContRuleEntry/swACLPktContRuleOffsetIndex2
  • /iso/identified-organization/dod/internet/private/enterprise/d-link/nmsModules/swAclMgmtMIB/swAclRuleMgmt/swACLPktContRuleTable/swACLPktContRuleEntry/swACLPktContRuleEnableReplaceDscp
  • /iso/identified-organization/dod/internet/private/enterprise/d-link/nmsModules/swAclMgmtMIB/swAclRuleMgmt/swACLPktContRuleTable/swACLPktContRuleEntry/swACLPktContRuleOffsetIndex2
  • Additional combinations skipped.

SNMP properties

Value type
INTEGER
Maximum access defined by MIB
read-create
Status in MIB
current

Definitions may combine these properties differently.

Compare 2 source variants

Variant 1 — D-Link official switch MIBs, D-Link MIB copies (LibreNMS/Observium Community)

Value type
INTEGER
Maximum access defined by MIB
read-create
Status in MIB
current

Variant 2 — D-Link official switch MIBs

Value type
INTEGER
Maximum access defined by MIB
read-create
Status in MIB
current
Allowed ranges
0–76

Enumerated values

Numbers refer to source variants above. Each value is shown only for variants that define it.

ValueNameSource variants
1enabled1
2disabled1

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.

In ACLMGMT-MIB, the row index consists of these components in order:

  1. swACLPktContRuleProfileID (INTEGER): one numeric subidentifier for the non-negative value.
  2. swACLPktContRuleAccessID (INTEGER): one numeric subidentifier for the non-negative value.

An instance has the form .1.3.6.1.4.1.171.12.9.3.3.1.11.<swACLPktContRuleProfileID>.<swACLPktContRuleAccessID>. Use values present on the device and permitted by its MIB. Other definitions can differ.

snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.12.9.3.3.1.11

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Available source records contain 7 distinct definitions; some records may not include a definition.

Show 7 published definitions

swACLPktContRuleEnableReplaceDscp · current

swACLPktContRuleEnableReplaceDscp OBJECT-TYPE
        SYNTAX  INTEGER {
               enabled(1),
               disabled(2)
               }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Specifies if the switch will change priorities of packets that match the access profile
	     DSCP field or not."
        ::= { swACLPktContRuleEntry 11 }

swACLPktContRuleEnableReplaceDscp · current

swACLPktContRuleEnableReplaceDscp OBJECT-TYPE
        SYNTAX  INTEGER {
               enabled(1),
               disabled(2)
               }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Specific the packets that match the access profile will replaced the
             DSCP field by the switch or not ."
        ::= { swACLPktContRuleEntry 11 }

swACLPktContRuleEnableReplaceDscp · current

swACLPktContRuleEnableReplaceDscp OBJECT-TYPE
        SYNTAX  INTEGER {
               enabled(1),
               disabled(2)
               }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Specific the packets that match the access profile will replaced the
             DSCP field by the switch or not ."
        ::= { swACLPktContRuleEntry 11}

swACLPktContRuleEnableReplaceDscp · current

swACLPktContRuleEnableReplaceDscp OBJECT-TYPE
        SYNTAX  INTEGER {
               enabled(1),
               disabled(2)
               }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Specifies if the switch will change priorities of packets that match the access profile
             DSCP field or not.
             Replace DSCP and replace ToS precedence can not both be supported.             "
        ::= { swACLPktContRuleEntry 11 }

swACLPktContRuleEnableReplaceDscp · current

swACLPktContRuleEnableReplaceDscp OBJECT-TYPE
        SYNTAX  INTEGER {
               enabled(1),
               disabled(2)
               }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Specifies if the switch will change priorities of packets that match the access profile
             DSCP field or not.
             Replace DSCP and replace ToS precedence can not both be supported.             "
        ::= { swACLPktContRuleEntry 11 }

swACLPktContRuleOffsetIndex2 · current

swACLPktContRuleOffsetIndex2 OBJECT-TYPE
		SYNTAX	INTEGER(0..76)
		MAX-ACCESS	read-create
		STATUS	current
		DESCRIPTION
			"Specifies the second offset will apply in getting the mask for this rule."
		::={ swACLPktContRuleEntry 11 }

swACLPktContRuleEnableReplaceDscp · current

swACLPktContRuleEnableReplaceDscp OBJECT-TYPE
        SYNTAX  INTEGER {
               enabled(1),
               disabled(2)
               }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Specifies if the switch will change priorities of packets that match the access profile
	     DSCP field or not.
             The replace DSCP and the replace ToS precedence can not be both supported.  	    
	    "
        ::= { swACLPktContRuleEntry 11 }

Meaning

Descriptions

5 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Description 1

Specifies if the switch will change priorities of packets that match the access profile DSCP field or not.

Sources for this description

D-Link official switch MIBs

See 1 matching source record

Description 2

Specific the packets that match the access profile will replaced the DSCP field by the switch or not .

Sources for this description

D-Link official switch MIBs

See 1 matching source record

Description 3

Specifies if the switch will change priorities of packets that match the access profile DSCP field or not. Replace DSCP and replace ToS precedence can not both be supported.

Sources for this description

D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Description 4

Specifies the second offset will apply in getting the mask for this rule.

Sources for this description

D-Link official switch MIBs

See 1 matching source record

Description 5

Specifies if the switch will change priorities of packets that match the access profile DSCP field or not. The replace DSCP and the replace ToS precedence can not be both supported.

Sources for this description

D-Link official switch MIBs

See 1 matching source record

Evidence

Source records

5 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1D-Link official switch MIBs1 record · 3 sources

Description 1

swACLPktContRuleEnableReplaceDscp · currentD-Link official switch MIBs3 sources

Status in source: current.

Names: swACLPktContRuleEnableReplaceDscp

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "swACLPktContRuleEnableReplaceDscp",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "enabled",
    "(",
    "1",
    ")",
    ",",
    "disabled",
    "(",
    "2",
    ")",
    "}",
    "MAX-ACCESS",
    "read-create",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"Specifies if the switch will change priorities of packets that match the access profile DSCP field or not.\"",
    "::=",
    "{",
    "swACLPktContRuleEntry",
    "11",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "enabled",
            1
          ],
          [
            "disabled",
            2
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-create"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "Specifies if the switch will change priorities of packets that match the access profile DSCP field or not."
    ],
    null,
    null,
    null,
    null
  ]
}
Records for description 2D-Link official switch MIBs1 record · 6 sources

Description 2

swACLPktContRuleEnableReplaceDscp · currentD-Link official switch MIBs6 sources

Status in source: current.

Names: swACLPktContRuleEnableReplaceDscp

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "swACLPktContRuleEnableReplaceDscp",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "enabled",
    "(",
    "1",
    ")",
    ",",
    "disabled",
    "(",
    "2",
    ")",
    "}",
    "MAX-ACCESS",
    "read-create",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"Specific the packets that match the access profile will replaced the DSCP field by the switch or not .\"",
    "::=",
    "{",
    "swACLPktContRuleEntry",
    "11",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "enabled",
            1
          ],
          [
            "disabled",
            2
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-create"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "Specific the packets that match the access profile will replaced the DSCP field by the switch or not ."
    ],
    null,
    null,
    null,
    null
  ]
}
Records for description 3D-Link official switch MIBs, D-Link MIB copies (LibreNMS/Observium Community)1 record · 12 sources

Description 3

swACLPktContRuleEnableReplaceDscp · currentD-Link official switch MIBs, D-Link MIB copies (LibreNMS/Observium Community)12 sources

Status in source: current.

Names: swACLPktContRuleEnableReplaceDscp

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "swACLPktContRuleEnableReplaceDscp",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "enabled",
    "(",
    "1",
    ")",
    ",",
    "disabled",
    "(",
    "2",
    ")",
    "}",
    "MAX-ACCESS",
    "read-create",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"Specifies if the switch will change priorities of packets that match the access profile DSCP field or not. Replace DSCP and replace ToS precedence can not both be supported. \"",
    "::=",
    "{",
    "swACLPktContRuleEntry",
    "11",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "enabled",
            1
          ],
          [
            "disabled",
            2
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-create"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "Specifies if the switch will change priorities of packets that match the access profile DSCP field or not. Replace DSCP and replace ToS precedence can not both be supported."
    ],
    null,
    null,
    null,
    null
  ]
}

Browse all 12 supporting sources

Records for description 4D-Link official switch MIBs1 record · 1 source

Description 4

swACLPktContRuleOffsetIndex2 · currentD-Link official switch MIBs1 source

Status in source: current.

Names: swACLPktContRuleOffsetIndex2

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "swACLPktContRuleOffsetIndex2",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "(",
    "0",
    ".",
    ".",
    "76",
    ")",
    "MAX-ACCESS",
    "read-create",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"Specifies the second offset will apply in getting the mask for this rule.\"",
    "::=",
    "{",
    "swACLPktContRuleEntry",
    "11",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "integerSubType",
        [
          [
            0,
            76
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-create"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "Specifies the second offset will apply in getting the mask for this rule."
    ],
    null,
    null,
    null,
    null
  ]
}
Records for description 5D-Link official switch MIBs1 record · 1 source

Description 5

swACLPktContRuleEnableReplaceDscp · currentD-Link official switch MIBs1 source

Status in source: current.

Names: swACLPktContRuleEnableReplaceDscp

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "swACLPktContRuleEnableReplaceDscp",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "enabled",
    "(",
    "1",
    ")",
    ",",
    "disabled",
    "(",
    "2",
    ")",
    "}",
    "MAX-ACCESS",
    "read-create",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"Specifies if the switch will change priorities of packets that match the access profile DSCP field or not. The replace DSCP and the replace ToS precedence can not be both supported. \"",
    "::=",
    "{",
    "swACLPktContRuleEntry",
    "11",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "enabled",
            1
          ],
          [
            "disabled",
            2
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-create"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "Specifies if the switch will change priorities of packets that match the access profile DSCP field or not. The replace DSCP and the replace ToS precedence can not be both supported."
    ],
    null,
    null,
    null,
    null
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.171)

Henry P. Nagai

Siblings (28)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.171.12.9.3.3.1.1 swACLPktContRuleProfileID00
1.3.6.1.4.1.171.12.9.3.3.1.2 swACLPktContRuleAccessID00
1.3.6.1.4.1.171.12.9.3.3.1.3 swACLPktContRuleOffset0to1500
1.3.6.1.4.1.171.12.9.3.3.1.4 swACLPktContRuleOffset16to3100
1.3.6.1.4.1.171.12.9.3.3.1.5 swACLPktContRuleOffset32to4700
1.3.6.1.4.1.171.12.9.3.3.1.6 swACLPktContRuleOffset48to6300
1.3.6.1.4.1.171.12.9.3.3.1.7 swACLPktContRuleOffset64to7900
1.3.6.1.4.1.171.12.9.3.3.1.8 swACLPktContRuleEnablePriority, swACLPktContRuleOffsetIndex100
1.3.6.1.4.1.171.12.9.3.3.1.9 swACLPktContRulePriority, swACLPktContRuleMask100
1.3.6.1.4.1.171.12.9.3.3.1.10 swACLPktContRuleReplacePriority, swACLPktContRuleData100
1.3.6.1.4.1.171.12.9.3.3.1.12 swACLPktContRuleRepDscp, swACLPktContRuleMask200
1.3.6.1.4.1.171.12.9.3.3.1.13 swACLPktContRulePermit, swACLPktContRuleData200
1.3.6.1.4.1.171.12.9.3.3.1.14 swACLPktContRulePort, swACLPktContRuleOffsetIndex3, swACLPktContRuleRowStatus00
1.3.6.1.4.1.171.12.9.3.3.1.15 swACLPktContRuleRowStatus, swACLPktContRuleMask300
1.3.6.1.4.1.171.12.9.3.3.1.16 swACLPktContRuleOwner, swACLPktContRuleData300
1.3.6.1.4.1.171.12.9.3.3.1.17 swACLPktContRuleRxRate, swACLPktContRuleOffsetIndex400
1.3.6.1.4.1.171.12.9.3.3.1.18 swACLPktContRuleEnableReplaceTosPrecedence, swACLPktContRuleMask400
1.3.6.1.4.1.171.12.9.3.3.1.19 swACLPktContRuleRepTosPrecedence, swACLPktContRuleData400
1.3.6.1.4.1.171.12.9.3.3.1.20 swACLPktContRuleVID, swACLPktContRuleOffsetIndex500
1.3.6.1.4.1.171.12.9.3.3.1.21 swACLPktContRuleMask5, swACLPktContRuleMirrorGroupID00
1.3.6.1.4.1.171.12.9.3.3.1.22 swACLPktContRuleData5, swACLPktContRuleRedirectPort, swACLPktContRuleRedirectEgressPort00
1.3.6.1.4.1.171.12.9.3.3.1.23 swACLPktContRuleURPFStateCheck00
1.3.6.1.4.1.171.12.9.3.3.1.24 swACLPktContRulePriority00
1.3.6.1.4.1.171.12.9.3.3.1.28 swACLPktContRuleRxRate00
1.3.6.1.4.1.171.12.9.3.3.1.29 swACLPktContRulePermit00
1.3.6.1.4.1.171.12.9.3.3.1.30 swACLPktContRulePort00
1.3.6.1.4.1.171.12.9.3.3.1.32 swACLPktContRuleTimeRange00
1.3.6.1.4.1.171.12.9.3.3.1.33 swACLPktContRuleRowStatus00