Available source records contain 13 distinct definitions; some records may not include a definition.
Show 13 published definitions
swACLPktContRulePermit · current
swACLPktContRulePermit OBJECT-TYPE
SYNTAX INTEGER {
deny(1),
permit(2),
mirror(3),
lease-renew(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the result of the packet examination is either to permit or deny.
The default is permit.
permit - Specifies that packets that match the access profile are
permitted to be forwarded by the switch.
deny - Specifies that packets that do not match the access profile
are not permitted to be forwarded by the switch and will be filtered.
mirror - Specifies the packets that match the access profile are copied to
the mirror port.
Note : The ACL mirror function will function after mirror is enabled
and a mirror port has been configured.
lease-renew - Specifies the packets that match the access profile are copied to
the CPU.
Note : After user enables port's lease-renew state, all kinds of DHCP packets
(include unicast and broadcast DHCP packets) will be copied to CPU
(using user ACL mask and rule)."
::= { swACLPktContRuleEntry 13 }swACLPktContRulePermit · current
swACLPktContRulePermit OBJECT-TYPE
SYNTAX INTEGER {
deny(1),
permit(2),
mirror(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates resoult of examination is permit ,deny or mirror to a mirror port;
default is permit(1):
permit - Specifies that packets that match the access profile are
permitted to be forwarded by the switch.
deny - Specifies that packets that do not match the access profile
are not permitted to be forwarded by the switch and will be filtered.
mirror - Specifies the packets that match the access profile are sent the copied one
to the mirror port.
Note : ACL mirror function will be worked after mirror enabled and mirror port has
been configured."
::= { swACLPktContRuleEntry 13 }swACLPktContRulePermit · current
swACLPktContRulePermit OBJECT-TYPE
SYNTAX INTEGER {
deny(1),
permit(2),
mirror(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the result of the packet examination is either to permit or deny.
The default is permit.
permit - Specifies that packets that match the access profile are
permitted to be forwarded by the switch.
deny - Specifies that packets that match the access profile
are not permitted to be forwarded by the switch and will be filtered.
mirror - Specifies the packets that match the access profile are copied to
the mirror port.
Note : The ACL mirror function will function after mirror is enabled
and a mirror port has been configured."
::= { swACLPktContRuleEntry 13 }swACLPktContRulePermit · current
swACLPktContRulePermit OBJECT-TYPE
SYNTAX INTEGER {
deny(1),
permit(2),
mirror(3),
lease-renew(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the result of the packet examination is either to 'permit' or 'deny'.
The default is 'permit'.
permit - Specifies that packets that match the access profile are
permitted to be forwarded by the switch.
deny - Specifies that packets that match the access profile
are not permitted to be forwarded by the switch and will be filtered.
mirror - Specifies the packets that match the access profile are copied to
the mirror port.
Note: The ACL mirror function will function after mirror is enabled
and a mirror port has been configured.
lease-renew - Specifies the packets that match the access profile are copied to
the CPU.
Note : After user enables port's lease-renew state, all kinds of DHCP packets
(include unicast and broadcast DHCP packets) will be copied to CPU
(using user ACL mask and rule)."
::= { swACLPktContRuleEntry 13 }swACLPktContRuleData2 · current
swACLPktContRuleData2 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the data for this rule. This rule relates to swACLPktContRuleOffsetIndex2 and swACLPktContRuleMask2."
::={ swACLPktContRuleEntry 13 }swACLPktContRulePermit · current
swACLPktContRulePermit OBJECT-TYPE
SYNTAX INTEGER {
deny(1),
permit(2),
mirror(3),
lease-renew(4),
set-drop-precedence(5),
redirect(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates if the result of the packet examination is 'permit' or 'deny'.
The default is 'permit'.
permit - Specifies that packets matching the access profile are
permitted to be forwarded by the switch.
deny - Specifies that packets matching the access profile
are not permitted to be forwarded by the switch and will be filtered.
mirror - Specifies that the packets matching the access profile are copied to
the mirror port.
Note : The ACL mirror function will function after mirror is enabled
and a mirror port has been configured.
lease-renew - Specifies the packets matching the access profile are copied to
the CPU.
Note : After a user enables the port's lease-renew state, all kinds of DHCP packets
(including unicast and broadcast DHCP packets) will be copied to the CPU
(using user ACL mask and rule).
set-drop-precedence - Specifies that packets matching the access profile are set
to drop precedence.
redirect - Specifies that packets matching the access profile are redirect to interface.
Note : The ACL redirect function will start functioning after redirect has been enabled
and the redirect port has been configured."
::= { swACLPktContRuleEntry 13 }swACLPktContRulePermit · current
swACLPktContRulePermit OBJECT-TYPE
SYNTAX INTEGER {
deny(1),
permit(2),
mirror(3),
lease-renew(4),
set-drop-precedence(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates if the result of the packet examination is 'permit' or 'deny'.
The default is 'permit'.
permit - Specifies that packets matching the access profile are
permitted to be forwarded by the switch.
deny - Specifies that packets matching the access profile
are not permitted to be forwarded by the switch and will be filtered.
mirror - Specifies that the packets matching the access profile are copied to
the mirror port.
Note : The ACL mirror function will function after mirror is enabled
and a mirror port has been configured.
lease-renew - Specifies the packets matching the access profile are copied to
the CPU.
Note : After a user enables the port's lease-renew state, all kinds of DHCP packets
(including unicast and broadcast DHCP packets) will be copied to the CPU
(using user ACL mask and rule).
set-drop-precedence - Specifies that packets matching the access profile are set
to drop precedence."
::= { swACLPktContRuleEntry 13 }swACLPktContRulePermit · current
swACLPktContRulePermit OBJECT-TYPE
SYNTAX INTEGER {
deny(1),
permit(2),
mirror(3),
lease-renew(4),
set-drop-precedence(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates if the result of the packet examination is 'permit' or 'deny'.
The default is 'permit'.
permit - Specifies that packets matching the access profile are
permitted to be forwarded by the switch.
deny - Specifies that packets matching the access profile
are not permitted to be forwarded by the switch and will be filtered.
mirror - Specifies that the packets matching the access profile are copied to
the mirror port.
Note : The ACL mirror function will function after mirror is enabled
and a mirror port has been configured.
lease-renew - Specifies the packets matching the access profile are copied to
the CPU.
Note : After a user enables the port's lease-renew state, all kinds of DHCP packets
(including unicast and broadcast DHCP packets) will be copied to the CPU
(using user ACL mask and rule).
set-drop-precedence - Specifies that packets matching the access profile are set
to drop precedence."
::= { swACLPktContRuleEntry 13 }swACLPktContRulePermit · current
swACLPktContRulePermit OBJECT-TYPE
SYNTAX INTEGER {
deny(1),
permit(2),
mirror(3),
lease-renew(4),
set-drop-precedence(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates if the result of the packet examination is 'permit' or 'deny'.
The default is 'permit'.
permit - Specifies that packets matching the access profile are
permitted to be forwarded by the switch.
deny - Specifies that packets matching the access profile
are not permitted to be forwarded by the switch and will be filtered.
mirror - Specifies that the packets matching the access profile are copied to
the mirror port.
Note : The ACL mirror function will function after mirror is enabled
and a mirror port has been configured.
lease-renew - Specifies the packets matching the access profile are copied to
the CPU.
Note : After a user enables the port's lease-renew state, all kinds of DHCP packets
(including unicast and broadcast DHCP packets) will be copied to the CPU
(using user ACL mask and rule).
set-drop-precedence - Specifies that packets matching the access profile are set
to drop precedence."
::= { swACLPktContRuleEntry 13 }swACLPktContRulePermit · current
swACLPktContRulePermit OBJECT-TYPE
SYNTAX INTEGER {
deny(1),
permit(2),
mirror(3),
lease-renew(4),
set-drop-precedence(5),
rspan(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates if the result of the packet examination is 'permit' or 'deny'.
The default is 'permit'.
permit - Specifies that packets matching the access profile are
permitted to be forwarded by the switch.
deny - Specifies that packets matching the access profile
are not permitted to be forwarded by the switch and will be filtered.
mirror - Specifies that the packets matching the access profile are copied to
the mirror port.
Note : The ACL mirror function will function after mirror is enabled
and a mirror port has been configured.
lease-renew - Specifies the packets matching the access profile are copied to
the CPU.
Note : After a user enables the port's lease-renew state, all kinds of DHCP packets
(including unicast and broadcast DHCP packets) will be copied to the CPU
(using user ACL mask and rule).
set-drop-precedence - Specifies that packets matching the access profile are set
to drop precedence.
rspan - Specifies the packets that match the access profile are sent the copied one to RSPAN vlan.
This option is apply for per flow RSPAN on source switch."
::= { swACLPktContRuleEntry 13 }swACLPktContRulePermit · current
swACLPktContRulePermit OBJECT-TYPE
SYNTAX INTEGER {
deny(1),
permit(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates resoult of examination is permit or deny;default is permit(1)
permit - Specifies that packets that match the access profile are
permitted to be forwarded by the switch.
deny - Specifies that packets that do not match the access profile
are not permitted to be forwarded by the switch and will be filtered."
::= { swACLPktContRuleEntry 13 }swACLPktContRulePermit · current
swACLPktContRulePermit OBJECT-TYPE
SYNTAX INTEGER {
deny(1),
permit(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates resoult of examination is permit or deny;default is permit(1)
permit - Specifies that packets that match the access profile are
permitted to be forwarded by the switch.
deny - Specifies that packets that do not match the access profile
are not permitted to be forwarded by the switch and will be filtered."
::= { swACLPktContRuleEntry 13}swACLPktContRulePermit · current
swACLPktContRulePermit OBJECT-TYPE
SYNTAX INTEGER {
deny(1),
permit(2),
mirror(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates resoult of examination is permit or deny;default is permit(1)
permit - Specifies that packets that match the access profile are
permitted to be forwarded by the switch.
deny - Specifies that packets that do not match the access profile
are not permitted to be forwarded by the switch and will be filtered.
mirror - Specifies the packets that match the access profile are sent the copied one
to the mirror port.
Note : ACL mirror function will be worked after mirror enabled and mirror port has
been configured."
::= { swACLPktContRuleEntry 13 }