OID reference
1.3.6.1.4.1.171.14.11.1.1.1.2
This object can be modified when port speed is configured to 10GBASE-T. other(1) - the port is not 10GBASE-T or master/slave timing mode is not specified. b10GbaseTMaster(2) - configure the port operate as master timing. b10GbaseTSlave(3) - configure the port operate as slave timing.
Identification
{1 3 6 1 4 1 171 14 11 1 1 1 2}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 1 | other | 1, 2 |
| 2 | b10GbaseTMaster | 1, 2 |
| 3 | b10GbaseTSlave | 1, 2 |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: ifIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.14.11.1.1.1.2
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
dSwPortIfB10GbaseTCtrl OBJECT-TYPE
SYNTAX INTEGER {
other(1),
b10GbaseTMaster(2),
b10GbaseTSlave(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object can be modified when port speed is configured to 10GBASE-T.
other(1) - the port is not 10GBASE-T or master/slave timing mode
is not specified.
b10GbaseTMaster(2) - configure the port operate as master timing.
b10GbaseTSlave(3) - configure the port operate as slave timing.
"
DEFVAL { b10GbaseTMaster }
::= { dSwPortIfEntry 2 }dSwPortIfB10GbaseTCtrl OBJECT-TYPE
SYNTAX INTEGER {
other(1),
b10GbaseTMaster(2),
b10GbaseTSlave(3)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"This object can be modified when port speed is configured to 10GBASE-T.
other(1) - the port is not 10GBASE-T or master/slave timing mode
is not specified.
b10GbaseTMaster(2) - configure the port operate as master timing.
b10GbaseTSlave(3) - configure the port operate as slave timing.
"
DEFVAL { b10GbaseTMaster }
::= { dSwPortIfEntry 2 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This object can be modified when port speed is configured to 10GBASE-T. other(1) - the port is not 10GBASE-T or master/slave timing mode is not specified. b10GbaseTMaster(2) - configure the port operate as master timing. b10GbaseTSlave(3) - configure the port operate as slave timing.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: dSwPortIfB10GbaseTCtrl
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dSwPortIfB10GbaseTCtrl",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"other",
"(",
"1",
")",
",",
"b10GbaseTMaster",
"(",
"2",
")",
",",
"b10GbaseTSlave",
"(",
"3",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object can be modified when port speed is configured to 10GBASE-T. other(1) - the port is not 10GBASE-T or master/slave timing mode is not specified. b10GbaseTMaster(2) - configure the port operate as master timing. b10GbaseTSlave(3) - configure the port operate as slave timing. \"",
"DEFVAL",
"{",
"b10GbaseTMaster",
"}",
"::=",
"{",
"dSwPortIfEntry",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"other",
1
],
[
"b10GbaseTMaster",
2
],
[
"b10GbaseTSlave",
3
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object can be modified when port speed is configured to 10GBASE-T. other(1) - the port is not 10GBASE-T or master/slave timing mode is not specified. b10GbaseTMaster(2) - configure the port operate as master timing. b10GbaseTSlave(3) - configure the port operate as slave timing."
],
null,
null,
null,
[
"DEFVAL",
"b10GbaseTMaster"
]
]
}Module: DLINKSW-SWITCHPORT-MIB
See published definition above
{'IF-MIB': ['ifIndex'], 'SNMPv2-TC': ['TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon']}Related source files and packages:
Same file in DXS-1100-R1.10-mibs-20161221.zip.
Same file in DXS-1100-R1.10-mibs-20161221.zip.
Same file in DGS-1520_MIB_20200430.zip.
Same file in DGS-1520_MIB_20200430.zip.
Module: DLINKSW-SWITCHPORT-MIB
{'IF-MIB': ['ifIndex'], 'SNMPv2-TC': ['TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon']}Related source files and packages:
Same file in DGS-3630-R2.0-MIB-20170927.zip.
Same file in DGS-3630-R2.0-MIB-20170927.zip.
Module: DLINKSW-SWITCHPORT-MIB
{'IF-MIB': ['ifIndex'], 'SNMPv2-TC': ['TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon']}Related source files and packages:
Same file in DXS-3600_32S_MIB_R2.40.zip.
Same file in DXS-3600_32S_MIB_R2.40.zip.
Same file in DXS3400_MIB_20181212.zip.
Same file in DXS-3400_MIB_R2.0.zip.
Module: DLINKSW-SWITCHPORT-MIB
{'IF-MIB': ['ifIndex'], 'SNMPv2-TC': ['TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon']}Related source files and packages:
Same file in DXS-1210-R1.00-MIB-20200515.7z.
Vendor MIB copy from the LibreNMS archive. D-Link support.
Module: DLINKSW-SWITCHPORT-MIB
{'IF-MIB': ['ifIndex'], 'SNMPv2-TC': ['TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon']}Related source files and packages:
Status in source: obsolete.
Names: dSwPortIfB10GbaseTCtrl
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dSwPortIfB10GbaseTCtrl",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"other",
"(",
"1",
")",
",",
"b10GbaseTMaster",
"(",
"2",
")",
",",
"b10GbaseTSlave",
"(",
"3",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"obsolete",
"DESCRIPTION",
"\"This object can be modified when port speed is configured to 10GBASE-T. other(1) - the port is not 10GBASE-T or master/slave timing mode is not specified. b10GbaseTMaster(2) - configure the port operate as master timing. b10GbaseTSlave(3) - configure the port operate as slave timing. \"",
"DEFVAL",
"{",
"b10GbaseTMaster",
"}",
"::=",
"{",
"dSwPortIfEntry",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"other",
1
],
[
"b10GbaseTMaster",
2
],
[
"b10GbaseTSlave",
3
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"obsolete"
],
[
"DESCRIPTION",
"This object can be modified when port speed is configured to 10GBASE-T. other(1) - the port is not 10GBASE-T or master/slave timing mode is not specified. b10GbaseTMaster(2) - configure the port operate as master timing. b10GbaseTSlave(3) - configure the port operate as slave timing."
],
null,
null,
null,
[
"DEFVAL",
"b10GbaseTMaster"
]
]
}Module: DLINKSW-SWITCHPORT-MIB
See published definition above
{'IF-MIB': ['ifIndex'], 'SNMPv2-TC': ['TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.14.11.1.1.1.1 | dSwPortIfB1000baseTCtrl | 0 | 0 | |
| 1.3.6.1.4.1.171.14.11.1.1.1.3 | dSwPortIfMdix | 0 | 0 | |
| 1.3.6.1.4.1.171.14.11.1.1.1.4 | dSwPortIfJumboFrameSize | 0 | 0 | |
| 1.3.6.1.4.1.171.14.11.1.1.1.5 | dSwPortIfSpeedAutoDowngrade | 0 | 0 | |
| 1.3.6.1.4.1.171.14.11.1.1.1.6 | dSwPortLinkChangeLogState | 0 | 0 | |
| 1.3.6.1.4.1.171.14.11.1.1.1.7 | dSwPortIfUnidirectional | 0 | 0 | |
| 1.3.6.1.4.1.171.14.11.1.1.1.8 | dSwPortIfMasterSlaveType | 0 | 0 |