OID reference
1.3.6.1.4.1.171.14.130.1.3.2.1.1
This object indicates rate limit value for Dynamic ARP Inspection purpose. If the incoming rate of ARP packets exceeds the value of this object, ARP packets will be dropped.
Identification
{1 3 6 1 4 1 171 14 130 1 3 2 1 1}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: ifIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.14.130.1.3.2.1.1
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
dDaiIfRateLimit OBJECT-TYPE
SYNTAX Unsigned32
UNITS "packet per second"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates rate limit value for Dynamic ARP
Inspection purpose. If the incoming rate of ARP packets
exceeds the value of this object, ARP packets will be
dropped. "
::= { dDaiIfRateLimitEntry 1 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This object indicates rate limit value for Dynamic ARP Inspection purpose. If the incoming rate of ARP packets exceeds the value of this object, ARP packets will be dropped.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: dDaiIfRateLimit
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dDaiIfRateLimit",
"OBJECT-TYPE",
"SYNTAX",
"Unsigned32",
"UNITS",
[
"literal",
"227061636b657420706572207365636f6e6422"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object indicates rate limit value for Dynamic ARP Inspection purpose. If the incoming rate of ARP packets exceeds the value of this object, ARP packets will be dropped. \"",
"::=",
"{",
"dDaiIfRateLimitEntry",
"1",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Unsigned32"
],
[
"UNITS",
"packet per second"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object indicates rate limit value for Dynamic ARP Inspection purpose. If the incoming rate of ARP packets exceeds the value of this object, ARP packets will be dropped."
],
null,
null,
null,
null
]
}Module: DLINKSW-DAI-MIB
See published definition above
{'IF-MIB': ['ifIndex', 'InterfaceIndex'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'DateAndTime', 'RowStatus', 'DisplayString', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'Gauge32', 'Integer32', 'Unsigned32', 'Counter64', 'IpAddress', 'OBJECT-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIdOrNone'], 'DLINKSW-TC-MIB': ['Dlink2kVlanList'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddressIPv4']}Related source files and packages:
Same file in DXS-3610_A1_MIB_v1.01.zip.
Same file in DXS-3600_32S_MIB_R2.40.zip.
Same file in DXS-3600_32S_MIB_R2.40.zip.
Same file in DXS3400_MIB_20181212.zip.
Vendor MIB copy from the LibreNMS archive. D-Link support.
Module: DLINKSW-DAI-MIB
{'IF-MIB': ['ifIndex', 'InterfaceIndex'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'DateAndTime', 'RowStatus', 'DisplayString', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'Gauge32', 'Integer32', 'Unsigned32', 'Counter64', 'IpAddress', 'OBJECT-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIdOrNone'], 'DLINKSW-TC-MIB': ['Dlink2kVlanList'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddressIPv4']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.14.130.1.3.2.1.2 | dDaiIfBurstInterval | 0 | 0 |