Specifies the interval after which a further authentication attempt should be made to this port if it is not authorized.
Sources for this description
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.171.14.151.1.2.2.1.7
Specifies the interval after which a further authentication attempt should be made to this port if it is not authorized.
Identification
{1 3 6 1 4 1 171 14 151 1 2 2 1 7}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: ifIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.14.151.1.2.2.1.7
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
dnaPortRestartInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the interval after which a further authentication
attempt should be made to this port if it is not authorized."
::= { dnaPortConfigEntry 7 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Specifies the interval after which a further authentication attempt should be made to this port if it is not authorized.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: dnaPortRestartInterval
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dnaPortRestartInterval",
"OBJECT-TYPE",
"SYNTAX",
"Unsigned32",
"(",
"1",
".",
".",
"65535",
")",
"UNITS",
[
"literal",
"227365636f6e647322"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Specifies the interval after which a further authentication attempt should be made to this port if it is not authorized.\"",
"::=",
"{",
"dnaPortConfigEntry",
"7",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Unsigned32",
[
"integerSubType",
[
[
1,
65535
]
]
]
],
[
"UNITS",
"seconds"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Specifies the interval after which a further authentication attempt should be made to this port if it is not authorized."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive. D-Link support.
Module: DLINKSW-NETWORK-ACCESS-MIB
See published definition above
{'IF-MIB': ['ifIndex'], 'SNMPv2-TC': ['MacAddress', 'TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanIdOrNone'], 'DLINKSW-TC-MIB': ['Dlink2kVlanList'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Module: DLINKSW-NETWORK-ACCESS-MIB
{'IF-MIB': ['ifIndex'], 'SNMPv2-TC': ['MacAddress', 'TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanIdOrNone'], 'DLINKSW-TC-MIB': ['Dlink2kVlanList'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Same file in DXS-3600_32S_MIB_R2.40.zip.
Same file in DXS-3600_32S_MIB_R2.40.zip.
Same file in DXS3400_MIB_20181212.zip.
Same file in DXS-3400_MIB_R2.0.zip.
Module: DLINKSW-NETWORK-ACCESS-MIB
{'IF-MIB': ['ifIndex'], 'SNMPv2-TC': ['MacAddress', 'TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanIdOrNone'], 'DLINKSW-TC-MIB': ['Dlink2kVlanList'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Same file in DGS-1520_MIB_20200430.zip.
Same file in DGS-1520_MIB_20200430.zip.
Module: DLINKSW-NETWORK-ACCESS-MIB
{'IF-MIB': ['ifIndex'], 'SNMPv2-TC': ['MacAddress', 'TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanIdOrNone'], 'DLINKSW-TC-MIB': ['Dlink2kVlanList'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Same file in DXS-3610_A1_MIB_v1.01.zip.
Same file in DXS-1210-R1.00-MIB-20200515.7z.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.14.151.1.2.2.1.1 | dnaPortMaxAuthedUserLimit | 0 | 0 | |
| 1.3.6.1.4.1.171.14.151.1.2.2.1.2 | dnaPortAuthHostMode | 0 | 0 | |
| 1.3.6.1.4.1.171.14.151.1.2.2.1.3 | dnaPortAuthVlansFirst2K | 0 | 0 | |
| 1.3.6.1.4.1.171.14.151.1.2.2.1.4 | dnaPortAuthVlansSecond2K | 0 | 0 | |
| 1.3.6.1.4.1.171.14.151.1.2.2.1.5 | dnaPortReauthEnabled | 0 | 0 | |
| 1.3.6.1.4.1.171.14.151.1.2.2.1.6 | dnaPortReauthInterval | 0 | 0 | |
| 1.3.6.1.4.1.171.14.151.1.2.2.1.8 | dnaPortInactivityTimeout | 0 | 0 | |
| 1.3.6.1.4.1.171.14.151.1.2.2.1.9 | dnaPortGuestVlanid | 0 | 0 |