OID reference
1.3.6.1.4.1.171.14.8.1.6.1.10
Indicates the number of address violations occurred on a secure interface. The counter will be initialized to zero when the port security feature is enabled on an interface.
Identification
{1 3 6 1 4 1 171 14 8 1 6 1 10}
A counter is cumulative. To estimate a rate, subtract two readings and divide by the elapsed time; use the units stated in the MIB.
Counter values can wrap or reset. A decrease alone does not distinguish a wrap from a reset, and multiple wraps between readings cannot be recovered reliably. Check the device's discontinuity indicators when available.
Published counter width: 64 bits. SMIv2: Counter32 · Counter64
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: ifIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.14.8.1.6.1.10
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
dPortSecIfViolationCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of address violations
occurred on a secure interface. The counter will
be initialized to zero when the port security
feature is enabled on an interface."
::= { dPortSecIfEntry 10 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Indicates the number of address violations occurred on a secure interface. The counter will be initialized to zero when the port security feature is enabled on an interface.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: dPortSecIfViolationCount
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dPortSecIfViolationCount",
"OBJECT-TYPE",
"SYNTAX",
"Counter64",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Indicates the number of address violations occurred on a secure interface. The counter will be initialized to zero when the port security feature is enabled on an interface.\"",
"::=",
"{",
"dPortSecIfEntry",
"10",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter64"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Indicates the number of address violations occurred on a secure interface. The counter will be initialized to zero when the port security feature is enabled on an interface."
],
null,
null,
null,
null
]
}Module: DLINKSW-PORT-SECURITY-MIB
See published definition above
{'IF-MIB': ['ifIndex', 'InterfaceIndex'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Unsigned32', 'Integer32', 'Counter64'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon']}Related source files and packages:
Same file in DXS-3610_A1_MIB_v1.01.zip.
Same file in DXS-3600_32S_MIB_R2.40.zip.
Same file in DXS-3600_32S_MIB_R2.40.zip.
Same file in DXS3400_MIB_20181212.zip.
Vendor MIB copy from the LibreNMS archive. D-Link support.
Module: DLINKSW-PORT-SECURITY-MIB
{'IF-MIB': ['ifIndex', 'InterfaceIndex'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Unsigned32', 'Integer32', 'Counter64'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.14.8.1.6.1.1 | dPortSecIfEnable | 0 | 0 | |
| 1.3.6.1.4.1.171.14.8.1.6.1.2 | dPortSecIfCurrentStatus | 0 | 0 | |
| 1.3.6.1.4.1.171.14.8.1.6.1.3 | dPortSecIfMaximumNum | 0 | 0 | |
| 1.3.6.1.4.1.171.14.8.1.6.1.4 | dPortSecIfViolationAction | 0 | 0 | |
| 1.3.6.1.4.1.171.14.8.1.6.1.5 | dPortSecIfSecureMode | 0 | 0 | |
| 1.3.6.1.4.1.171.14.8.1.6.1.6 | dPortSecIfAgingTime | 0 | 0 | |
| 1.3.6.1.4.1.171.14.8.1.6.1.7 | dPortSecIfAgingType | 0 | 0 | |
| 1.3.6.1.4.1.171.14.8.1.6.1.8 | dPortSecIfClearDynamicAddr | 0 | 0 | |
| 1.3.6.1.4.1.171.14.8.1.6.1.9 | dPortSecIfCurrentNum | 0 | 0 |