OID reference
1.3.6.1.4.1.171.15.13.1.2.1.1.2
This object indicates Tx Rate of the specified port. The special value of 0 indicates there is no bandwidth limit for egress packets. It is based on the dpQosBandwidthTxRateMode field and
Identification
{1 3 6 1 4 1 171 15 13 1 2 1 1 2}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 1 | noLimit | 1, 2, 3 |
| 2 | limit_16Kbps | 3 |
| 3 | limit_16Kbps | 1 |
| 3 | limit_32Kbps | 3 |
| 4 | limit_32Kbps | 1 |
| 4 | limit_64Kbps | 3 |
| 5 | limit_128Kbps | 3 |
| 5 | limit_64Kbps | 1, 2 |
| 6 | limit_128Kbps | 1, 2 |
| 6 | limit_256Kbps | 3 |
| 7 | limit_256Kbps | 1, 2 |
| 7 | limit_512Kbps | 3 |
| 8 | limit_1Mbps | 3 |
| 8 | limit_512Kbps | 1, 2 |
| 9 | limit_1Mbps | 1, 2 |
| 9 | limit_2Mbps | 3 |
| 10 | limit_2Mbps | 1, 2 |
| 10 | limit_4Mbps | 3 |
| 11 | limit_4Mbps | 1, 2 |
| 11 | limit_8Mbps | 3 |
| 12 | limit_16Mbps | 3 |
| 12 | limit_8Mbps | 1, 2 |
| 13 | limit_16Mbps | 1, 2 |
| 13 | limit_32Mbps | 3 |
| 14 | limit_32Mbps | 1, 2 |
| 14 | limit_64Mbps | 3 |
| 15 | limit_128Mbps | 3 |
| 15 | limit_64Mbps | 1, 2 |
| 16 | limit_128Mbps | 1, 2 |
| 16 | limit_256Mbps | 3 |
| 17 | limit_256Mbps | 1, 2 |
| 17 | limit_512Mbps | 3 |
| 18 | limit_512Mbps | 1, 2 |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: dot1dBasePort.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.15.13.1.2.1.1.2
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 4 distinct definitions; some records may not include a definition.
dpQosBandwidthTxRate OBJECT-TYPE
SYNTAX INTEGER {
noLimit(1),
limit_16Kbps(3),
limit_32Kbps(4),
limit_64Kbps(5),
limit_128Kbps(6),
limit_256Kbps(7),
limit_512Kbps(8),
limit_1Mbps(9),
limit_2Mbps(10),
limit_4Mbps(11),
limit_8Mbps(12),
limit_16Mbps(13),
limit_32Mbps(14),
limit_64Mbps(15),
limit_128Mbps(16),
limit_256Mbps(17),
limit_512Mbps(18)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates Tx Rate of the specified port.
The special value of 0 indicates there is no bandwidth
limit for egress packets.
It is based on the dpQosBandwidthTxRateMode field and
"
::= { dpQosBandwidthCtrlEntry 2 }dpQosBandwidthTxRate OBJECT-TYPE
SYNTAX INTEGER {
noLimit(1),
limit_64Kbps(5),
limit_128Kbps(6),
limit_256Kbps(7),
limit_512Kbps(8),
limit_1Mbps(9),
limit_2Mbps(10),
limit_4Mbps(11),
limit_8Mbps(12),
limit_16Mbps(13),
limit_32Mbps(14),
limit_64Mbps(15),
limit_128Mbps(16),
limit_256Mbps(17),
limit_512Mbps(18)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates Tx Rate of the specified port.
The special value of 0 indicates there is no bandwidth
limit for egress packets.
It is based on the dpQosBandwidthTxRateMode field and
"
::= { dpQosBandwidthCtrlEntry 2 }dpQosBandwidthTxRate OBJECT-TYPE
SYNTAX INTEGER {
noLimit(1),
limit_64Kbps(5),
limit_128Kbps(6),
limit_256Kbps(7),
limit_512Kbps(8),
limit_1Mbps(9),
limit_2Mbps(10),
limit_4Mbps(11),
limit_8Mbps(12),
limit_16Mbps(13),
limit_32Mbps(14),
limit_64Mbps(15),
limit_128Mbps(16),
limit_256Mbps(17),
limit_512Mbps(18)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates Tx Rate of the specified port.
The special value of 0 indicates there is no bandwidth
limit for egress packets.
It is based on the dpQosBandwidthTxRateMode field and
"
::= { dpQosBandwidthCtrlEntry 2 }dpQosBandwidthTxRate OBJECT-TYPE
SYNTAX INTEGER {
noLimit(1),
limit_16Kbps(2),
limit_32Kbps(3),
limit_64Kbps(4),
limit_128Kbps(5),
limit_256Kbps(6),
limit_512Kbps(7),
limit_1Mbps(8),
limit_2Mbps(9),
limit_4Mbps(10),
limit_8Mbps(11),
limit_16Mbps(12),
limit_32Mbps(13),
limit_64Mbps(14),
limit_128Mbps(15),
limit_256Mbps(16),
limit_512Mbps(17)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates Tx Rate of the specified port.
The special value of 0 indicates there is no bandwidth
limit for egress packets.
It is based on the dpQosBandwidthTxRateMode field and
"
::= { dpQosBandwidthCtrlEntry 2 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This object indicates Tx Rate of the specified port. The special value of 0 indicates there is no bandwidth limit for egress packets. It is based on the dpQosBandwidthTxRateMode field and
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: dpQosBandwidthTxRate
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dpQosBandwidthTxRate",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"noLimit",
"(",
"1",
")",
",",
"limit_16Kbps",
"(",
"3",
")",
",",
"limit_32Kbps",
"(",
"4",
")",
",",
"limit_64Kbps",
"(",
"5",
")",
",",
"limit_128Kbps",
"(",
"6",
")",
",",
"limit_256Kbps",
"(",
"7",
")",
",",
"limit_512Kbps",
"(",
"8",
")",
",",
"limit_1Mbps",
"(",
"9",
")",
",",
"limit_2Mbps",
"(",
"10",
")",
",",
"limit_4Mbps",
"(",
"11",
")",
",",
"limit_8Mbps",
"(",
"12",
")",
",",
"limit_16Mbps",
"(",
"13",
")",
",",
"limit_32Mbps",
"(",
"14",
")",
",",
"limit_64Mbps",
"(",
"15",
")",
",",
"limit_128Mbps",
"(",
"16",
")",
",",
"limit_256Mbps",
"(",
"17",
")",
",",
"limit_512Mbps",
"(",
"18",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object indicates Tx Rate of the specified port. The special value of 0 indicates there is no bandwidth limit for egress packets. It is based on the dpQosBandwidthTxRateMode field and \"",
"::=",
"{",
"dpQosBandwidthCtrlEntry",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"noLimit",
1
],
[
"limit_16Kbps",
3
],
[
"limit_32Kbps",
4
],
[
"limit_64Kbps",
5
],
[
"limit_128Kbps",
6
],
[
"limit_256Kbps",
7
],
[
"limit_512Kbps",
8
],
[
"limit_1Mbps",
9
],
[
"limit_2Mbps",
10
],
[
"limit_4Mbps",
11
],
[
"limit_8Mbps",
12
],
[
"limit_16Mbps",
13
],
[
"limit_32Mbps",
14
],
[
"limit_64Mbps",
15
],
[
"limit_128Mbps",
16
],
[
"limit_256Mbps",
17
],
[
"limit_512Mbps",
18
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object indicates Tx Rate of the specified port. The special value of 0 indicates there is no bandwidth limit for egress packets. It is based on the dpQosBandwidthTxRateMode field and"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DLINKPRIME-QOS-MIB
See published definition above
{'SNMPv2-TC': ['RowStatus', 'DisplayString', 'TruthValue', 'TEXTUAL-CONVENTION'], 'BRIDGE-MIB': ['dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'DLINK-ID-REC-MIB': ['dlinkPrimeCommon']}Related source files and packages:
Status in source: current.
Names: dpQosBandwidthTxRate
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dpQosBandwidthTxRate",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"noLimit",
"(",
"1",
")",
",",
"limit_64Kbps",
"(",
"5",
")",
",",
"limit_128Kbps",
"(",
"6",
")",
",",
"limit_256Kbps",
"(",
"7",
")",
",",
"limit_512Kbps",
"(",
"8",
")",
",",
"limit_1Mbps",
"(",
"9",
")",
",",
"limit_2Mbps",
"(",
"10",
")",
",",
"limit_4Mbps",
"(",
"11",
")",
",",
"limit_8Mbps",
"(",
"12",
")",
",",
"limit_16Mbps",
"(",
"13",
")",
",",
"limit_32Mbps",
"(",
"14",
")",
",",
"limit_64Mbps",
"(",
"15",
")",
",",
"limit_128Mbps",
"(",
"16",
")",
",",
"limit_256Mbps",
"(",
"17",
")",
",",
"limit_512Mbps",
"(",
"18",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object indicates Tx Rate of the specified port. The special value of 0 indicates there is no bandwidth limit for egress packets. It is based on the dpQosBandwidthTxRateMode field and \"",
"::=",
"{",
"dpQosBandwidthCtrlEntry",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"noLimit",
1
],
[
"limit_64Kbps",
5
],
[
"limit_128Kbps",
6
],
[
"limit_256Kbps",
7
],
[
"limit_512Kbps",
8
],
[
"limit_1Mbps",
9
],
[
"limit_2Mbps",
10
],
[
"limit_4Mbps",
11
],
[
"limit_8Mbps",
12
],
[
"limit_16Mbps",
13
],
[
"limit_32Mbps",
14
],
[
"limit_64Mbps",
15
],
[
"limit_128Mbps",
16
],
[
"limit_256Mbps",
17
],
[
"limit_512Mbps",
18
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object indicates Tx Rate of the specified port. The special value of 0 indicates there is no bandwidth limit for egress packets. It is based on the dpQosBandwidthTxRateMode field and"
],
null,
null,
null,
null
]
}Module: DLINKPRIME-QOS-MIB
See published definition above
{'SNMPv2-TC': ['RowStatus', 'DisplayString', 'TruthValue', 'TEXTUAL-CONVENTION'], 'BRIDGE-MIB': ['dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'DLINK-ID-REC-MIB': ['dlinkPrimeCommon']}Related source files and packages:
Same file in DGS-1100-MPMPP_1.01.B012_mib.zip.
Same file in DGS-1100-MPMPP_1.01.B012_mib.zip.
Same file in DGS-1100-MPMPP_1.01.B012_mib.zip.
Module: DLINKPRIME-QOS-MIB
See published definition above
{'SNMPv2-TC': ['RowStatus', 'DisplayString', 'TruthValue', 'TEXTUAL-CONVENTION'], 'BRIDGE-MIB': ['dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'DLINK-ID-REC-MIB': ['dlinkPrimeCommon']}Related source files and packages:
Same file in DGS-1100-ME_1.00.B018_mib_file.zip.
Same file in DGS-1100-ME_1.00.B018_mib_file.zip.
Same file in DGS-1100-ME_1.00.B018_mib_file.zip.
Same file in DGS-1100-ME_1.00.B018_mib_file.zip.
Status in source: current.
Names: dpQosBandwidthTxRate
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dpQosBandwidthTxRate",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"noLimit",
"(",
"1",
")",
",",
"limit_16Kbps",
"(",
"2",
")",
",",
"limit_32Kbps",
"(",
"3",
")",
",",
"limit_64Kbps",
"(",
"4",
")",
",",
"limit_128Kbps",
"(",
"5",
")",
",",
"limit_256Kbps",
"(",
"6",
")",
",",
"limit_512Kbps",
"(",
"7",
")",
",",
"limit_1Mbps",
"(",
"8",
")",
",",
"limit_2Mbps",
"(",
"9",
")",
",",
"limit_4Mbps",
"(",
"10",
")",
",",
"limit_8Mbps",
"(",
"11",
")",
",",
"limit_16Mbps",
"(",
"12",
")",
",",
"limit_32Mbps",
"(",
"13",
")",
",",
"limit_64Mbps",
"(",
"14",
")",
",",
"limit_128Mbps",
"(",
"15",
")",
",",
"limit_256Mbps",
"(",
"16",
")",
",",
"limit_512Mbps",
"(",
"17",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object indicates Tx Rate of the specified port. The special value of 0 indicates there is no bandwidth limit for egress packets. It is based on the dpQosBandwidthTxRateMode field and \"",
"::=",
"{",
"dpQosBandwidthCtrlEntry",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"noLimit",
1
],
[
"limit_16Kbps",
2
],
[
"limit_32Kbps",
3
],
[
"limit_64Kbps",
4
],
[
"limit_128Kbps",
5
],
[
"limit_256Kbps",
6
],
[
"limit_512Kbps",
7
],
[
"limit_1Mbps",
8
],
[
"limit_2Mbps",
9
],
[
"limit_4Mbps",
10
],
[
"limit_8Mbps",
11
],
[
"limit_16Mbps",
12
],
[
"limit_32Mbps",
13
],
[
"limit_64Mbps",
14
],
[
"limit_128Mbps",
15
],
[
"limit_256Mbps",
16
],
[
"limit_512Mbps",
17
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object indicates Tx Rate of the specified port. The special value of 0 indicates there is no bandwidth limit for egress packets. It is based on the dpQosBandwidthTxRateMode field and"
],
null,
null,
null,
null
]
}Module: DLINKPRIME-QOS-MIB
See published definition above
{'SNMPv2-TC': ['RowStatus', 'DisplayString', 'TruthValue', 'TEXTUAL-CONVENTION'], 'BRIDGE-MIB': ['dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'DLINK-ID-REC-MIB': ['dlinkPrimeCommon']}Related source files and packages:
Same file in DGS-1100_MP_MPP_C1_2.00.07_MIB.RAR.
Same file in DGS-1100_MP_MPP_C1_2.00.07_MIB.RAR.
Same file in DGS-1100_MP_MPP_C1_2.00.07_MIB.RAR.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.15.13.1.2.1.1.1 | dpQosBandwidthRxRate | 0 | 0 |