OID reference
1.3.6.1.4.1.171.15.26.1.1.1.2
This object indicates whether enable the tagging mode of the native VLAN on the interface. Note: This value is meaningful only when the VLAN mode of the port is one of the 'trunk', 'privateVlanTrunkPromiscuous' or 'privateVlanTrunkSecondary'.
Identification
{1 3 6 1 4 1 171 15 26 1 1 1 2}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 1 | admitAll | 2 |
| 2 | admitUntagged | 2 |
| 3 | admitTagged | 2 |
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
dpVlanPortIfTrunkNativeVlanTagged OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether enable the tagging mode of the native
VLAN on the interface.
Note: This value is meaningful only when the VLAN mode of the port
is one of the 'trunk', 'privateVlanTrunkPromiscuous' or
'privateVlanTrunkSecondary'."
::= { dpVlanPortIfCtrlEntry 2 }dpVlanPortIfAcceptableFrameTypes OBJECT-TYPE
SYNTAX INTEGER {
admitAll(1),
admitUntagged(2),
admitTagged(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the acceptable frame types on the interface.
'admitAll' - Permits both tagged and untagged packet.
'admitUntagged' - Only untagged incoming packets are permitted and tagged packets
are dropped.
'admitTagged' - Only tagged incoming packets are permitted and untagged packets
are dropped."
::= { dpVlanPortIfCtrlEntry 2 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
This object indicates whether enable the tagging mode of the native VLAN on the interface. Note: This value is meaningful only when the VLAN mode of the port is one of the 'trunk', 'privateVlanTrunkPromiscuous' or 'privateVlanTrunkSecondary'.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Description 2
This object indicates the acceptable frame types on the interface. 'admitAll' - Permits both tagged and untagged packet. 'admitUntagged' - Only untagged incoming packets are permitted and tagged packets are dropped. 'admitTagged' - Only tagged incoming packets are permitted and untagged packets are dropped.
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: dpVlanPortIfTrunkNativeVlanTagged
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dpVlanPortIfTrunkNativeVlanTagged",
"OBJECT-TYPE",
"SYNTAX",
"TruthValue",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object indicates whether enable the tagging mode of the native VLAN on the interface. Note: This value is meaningful only when the VLAN mode of the port is one of the 'trunk', 'privateVlanTrunkPromiscuous' or 'privateVlanTrunkSecondary'.\"",
"::=",
"{",
"dpVlanPortIfCtrlEntry",
"2",
"}"
],
"syntax_tree": [
[
"row",
"TruthValue"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object indicates whether enable the tagging mode of the native VLAN on the interface. Note: This value is meaningful only when the VLAN mode of the port is one of the 'trunk', 'privateVlanTrunkPromiscuous' or 'privateVlanTrunkSecondary'."
],
null,
null,
null,
null
]
}Module: DLINKPRIME-VLAN-MIB
See published definition above
{'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIdOrNone', 'PortList', 'dot1vProtocolPortGroupId'], 'DLINK-ID-REC-MIB': ['dlinkPrimeCommon'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetAddressPrefixLength']}Related source files and packages:
Same file in DGS-1100-MPMPP_1.01.B012_mib.zip.
Same file in DGS-1100-MPMPP_1.01.B012_mib.zip.
Same file in DGS-1100-MPMPP_1.01.B012_mib.zip.
Module: DLINKPRIME-VLAN-MIB
{'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIdOrNone', 'PortList', 'dot1vProtocolPortGroupId'], 'DLINK-ID-REC-MIB': ['dlinkPrimeCommon'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetAddressPrefixLength']}Related source files and packages:
Same file in DGS-1100-ME_1.00.B018_mib_file.zip.
Same file in DGS-1100-ME_1.00.B018_mib_file.zip.
Same file in DGS-1100-ME_1.00.B018_mib_file.zip.
Same file in DGS-1100-ME_1.00.B018_mib_file.zip.
Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DLINKPRIME-VLAN-MIB
{'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIdOrNone', 'PortList', 'dot1vProtocolPortGroupId'], 'DLINK-ID-REC-MIB': ['dlinkPrimeCommon'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetAddressPrefixLength']}Related source files and packages:
Status in source: current.
Names: dpVlanPortIfAcceptableFrameTypes
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dpVlanPortIfAcceptableFrameTypes",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"admitAll",
"(",
"1",
")",
",",
"admitUntagged",
"(",
"2",
")",
",",
"admitTagged",
"(",
"3",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object indicates the acceptable frame types on the interface. 'admitAll' - Permits both tagged and untagged packet. 'admitUntagged' - Only untagged incoming packets are permitted and tagged packets are dropped. 'admitTagged' - Only tagged incoming packets are permitted and untagged packets are dropped.\"",
"::=",
"{",
"dpVlanPortIfCtrlEntry",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"admitAll",
1
],
[
"admitUntagged",
2
],
[
"admitTagged",
3
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object indicates the acceptable frame types on the interface. 'admitAll' - Permits both tagged and untagged packet. 'admitUntagged' - Only untagged incoming packets are permitted and tagged packets are dropped. 'admitTagged' - Only tagged incoming packets are permitted and untagged packets are dropped."
],
null,
null,
null,
null
]
}Module: DLINKPRIME-VLAN-MIB
See published definition above
{'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIdOrNone', 'PortList', 'dot1vProtocolPortGroupId'], 'DLINK-ID-REC-MIB': ['dlinkPrimeCommon'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetAddressPrefixLength']}Related source files and packages:
Same file in DGS-1100_MP_MPP_C1_2.00.07_MIB.RAR.
Same file in DGS-1100_MP_MPP_C1_2.00.07_MIB.RAR.
Same file in DGS-1100_MP_MPP_C1_2.00.07_MIB.RAR.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.15.26.1.1.1.1 | dpVlanPortIfMode | 0 | 0 | |
| 1.3.6.1.4.1.171.15.26.1.1.1.3 | dpVlanPortIfAcceptableFrameTypes, dpVlanPortIfTagAllowVlanLst | 0 | 0 | |
| 1.3.6.1.4.1.171.15.26.1.1.1.4 | dpVlanPortIfTagAllowVlanLstFirst2K, dpVlanPortIfUntagAllowVlanLst | 0 | 0 | |
| 1.3.6.1.4.1.171.15.26.1.1.1.5 | dpVlanPortIfTagAllowVlanLstSecond2K | 0 | 0 | |
| 1.3.6.1.4.1.171.15.26.1.1.1.6 | dpVlanPortIfUntagAllowVlanLstFirst2K | 0 | 0 | |
| 1.3.6.1.4.1.171.15.26.1.1.1.7 | dpVlanPortIfUntagAllowVlanLstSecond2K | 0 | 0 |