OID reference
1.3.6.1.4.1.171.15.26.1.1.1.4
This object specifies the VLANs in a string of octets containing one bit per VLAN for VLANs 1 to 2048. If the bit is set to '1', then the interface is allowed to be the VLAN's tagged member. Note: This value is meaningful only when the VLAN mode of the port is one of the 'hybrid', 'trunk', 'privateVlanTrunkPromiscuous…
Identification
{1 3 6 1 4 1 171 15 26 1 1 1 4}
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
dpVlanPortIfTagAllowVlanLstFirst2K OBJECT-TYPE
SYNTAX Dlink2kVlanList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the VLANs in a string of octets containing
one bit per VLAN for VLANs 1 to 2048.
If the bit is set to '1', then the interface is allowed to be the
VLAN's tagged member.
Note: This value is meaningful only when the VLAN mode of the port
is one of the 'hybrid', 'trunk', 'privateVlanTrunkPromiscuous'
or 'privateVlanTrunkSecondary'"
::= { dpVlanPortIfCtrlEntry 4 }dpVlanPortIfUntagAllowVlanLst OBJECT-TYPE
SYNTAX Dlink2kVlanList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the VLANs in a string of VLANs 1 to 4094.
A single vlan is separated by ',', for example: 2,4,6.
Continuous vlan is separated by '-', for example: 8-2048.
Note: This value is meaningful only when the VLAN mode of the port
is 'hybrid' or 'access'."
::= { dpVlanPortIfCtrlEntry 4 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
This object specifies the VLANs in a string of octets containing one bit per VLAN for VLANs 1 to 2048. If the bit is set to '1', then the interface is allowed to be the VLAN's tagged member. Note: This value is meaningful only when the VLAN mode of the port is one of the 'hybrid', 'trunk', 'privateVlanTrunkPromiscuous' or 'privateVlanTrunkSecondary'
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Description 2
This object specifies the VLANs in a string of VLANs 1 to 4094. A single vlan is separated by ',', for example: 2,4,6. Continuous vlan is separated by '-', for example: 8-2048. Note: This value is meaningful only when the VLAN mode of the port is 'hybrid' or 'access'.
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: dpVlanPortIfTagAllowVlanLstFirst2K
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dpVlanPortIfTagAllowVlanLstFirst2K",
"OBJECT-TYPE",
"SYNTAX",
"Dlink2kVlanList",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object specifies the VLANs in a string of octets containing one bit per VLAN for VLANs 1 to 2048. If the bit is set to '1', then the interface is allowed to be the VLAN's tagged member. Note: This value is meaningful only when the VLAN mode of the port is one of the 'hybrid', 'trunk', 'privateVlanTrunkPromiscuous' or 'privateVlanTrunkSecondary'\"",
"::=",
"{",
"dpVlanPortIfCtrlEntry",
"4",
"}"
],
"syntax_tree": [
[
"row",
"Dlink2kVlanList"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object specifies the VLANs in a string of octets containing one bit per VLAN for VLANs 1 to 2048. If the bit is set to '1', then the interface is allowed to be the VLAN's tagged member. Note: This value is meaningful only when the VLAN mode of the port is one of the 'hybrid', 'trunk', 'privateVlanTrunkPromiscuous' or 'privateVlanTrunkSecondary'"
],
null,
null,
null,
null
]
}Module: DLINKPRIME-VLAN-MIB
See published definition above
{'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIdOrNone', 'PortList', 'dot1vProtocolPortGroupId'], 'DLINK-ID-REC-MIB': ['dlinkPrimeCommon'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetAddressPrefixLength']}Related source files and packages:
Same file in DGS-1100-MPMPP_1.01.B012_mib.zip.
Same file in DGS-1100-MPMPP_1.01.B012_mib.zip.
Same file in DGS-1100-MPMPP_1.01.B012_mib.zip.
Module: DLINKPRIME-VLAN-MIB
{'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIdOrNone', 'PortList', 'dot1vProtocolPortGroupId'], 'DLINK-ID-REC-MIB': ['dlinkPrimeCommon'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetAddressPrefixLength']}Related source files and packages:
Same file in DGS-1100-ME_1.00.B018_mib_file.zip.
Same file in DGS-1100-ME_1.00.B018_mib_file.zip.
Same file in DGS-1100-ME_1.00.B018_mib_file.zip.
Same file in DGS-1100-ME_1.00.B018_mib_file.zip.
Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DLINKPRIME-VLAN-MIB
{'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIdOrNone', 'PortList', 'dot1vProtocolPortGroupId'], 'DLINK-ID-REC-MIB': ['dlinkPrimeCommon'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetAddressPrefixLength']}Related source files and packages:
Status in source: current.
Names: dpVlanPortIfUntagAllowVlanLst
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dpVlanPortIfUntagAllowVlanLst",
"OBJECT-TYPE",
"SYNTAX",
"Dlink2kVlanList",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object specifies the VLANs in a string of VLANs 1 to 4094. A single vlan is separated by ',', for example: 2,4,6. Continuous vlan is separated by '-', for example: 8-2048. Note: This value is meaningful only when the VLAN mode of the port is 'hybrid' or 'access'.\"",
"::=",
"{",
"dpVlanPortIfCtrlEntry",
"4",
"}"
],
"syntax_tree": [
[
"row",
"Dlink2kVlanList"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object specifies the VLANs in a string of VLANs 1 to 4094. A single vlan is separated by ',', for example: 2,4,6. Continuous vlan is separated by '-', for example: 8-2048. Note: This value is meaningful only when the VLAN mode of the port is 'hybrid' or 'access'."
],
null,
null,
null,
null
]
}Module: DLINKPRIME-VLAN-MIB
See published definition above
{'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIdOrNone', 'PortList', 'dot1vProtocolPortGroupId'], 'DLINK-ID-REC-MIB': ['dlinkPrimeCommon'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetAddressPrefixLength']}Related source files and packages:
Same file in DGS-1100_MP_MPP_C1_2.00.07_MIB.RAR.
Same file in DGS-1100_MP_MPP_C1_2.00.07_MIB.RAR.
Same file in DGS-1100_MP_MPP_C1_2.00.07_MIB.RAR.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.15.26.1.1.1.1 | dpVlanPortIfMode | 0 | 0 | |
| 1.3.6.1.4.1.171.15.26.1.1.1.2 | dpVlanPortIfTrunkNativeVlanTagged, dpVlanPortIfAcceptableFrameTypes | 0 | 0 | |
| 1.3.6.1.4.1.171.15.26.1.1.1.3 | dpVlanPortIfAcceptableFrameTypes, dpVlanPortIfTagAllowVlanLst | 0 | 0 | |
| 1.3.6.1.4.1.171.15.26.1.1.1.5 | dpVlanPortIfTagAllowVlanLstSecond2K | 0 | 0 | |
| 1.3.6.1.4.1.171.15.26.1.1.1.6 | dpVlanPortIfUntagAllowVlanLstFirst2K | 0 | 0 | |
| 1.3.6.1.4.1.171.15.26.1.1.1.7 | dpVlanPortIfUntagAllowVlanLstSecond2K | 0 | 0 |