Unidirectional or Bidirectional mode:
Uni - Each pair operates independently
i.e. a switch over in one pair does not
effect the remote pair.
Bi - both remote and local pairs have to
switch together.
Parsed from file ac120.my.V07.00.C00.mib.txt
Company: None
Module: ACMIB
Unidirectional or Bidirectional mode:
Uni - Each pair operates independently
i.e. a switch over in one pair does not
effect the remote pair.
Bi - both remote and local pairs have to
switch together.
Parsed from file ACMIB.mib
Module: ACMIB
Vendor: Lucent Technologies
Module: ACMIB
[Automatically extracted from oidview.com]
oc3APSPairMode OBJECT-TYPE SYNTAX INTEGER { unidirectional(1), bidirectional(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Unidirectional or Bidirectional mode: Uni - Each pair operates independently i.e. a switch over in one pair does not effect the remote pair. Bi - both remote and local pairs have to switch together." DEFVAL { unidirectional } ::= { oc3APSPairConfigEntry 2 }
oc3APSPairMode OBJECT-TYPE SYNTAX INTEGER { unidirectional(1), bidirectional(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Unidirectional or Bidirectional mode: Uni - Each pair operates independently i.e. a switch over in one pair does not effect the remote pair. Bi - both remote and local pairs have to switch together." DEFVAL { unidirectional } ::= { oc3APSPairConfigEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.18.2.16.1.1.1 | oc3APSPairId | 0 | 0 | APS Pair Port index - SSPP |
| 1.3.6.1.4.1.1751.2.18.2.16.1.1.3 | oc3APSPairOption | 0 | 0 | Nonrevertive - After a switch to Prot port, even if the working comes up there is no switch to the working port back. Revertive - … |
| 1.3.6.1.4.1.1751.2.18.2.16.1.1.4 | oc3APSPairWorkingSFBERThreshold | 0 | 0 | Bits error Rate threshold to declare signal failure |
| 1.3.6.1.4.1.1751.2.18.2.16.1.1.5 | oc3APSPairWorkingSDBERThreshold | 0 | 0 | Bits error Rate threshold to declare signal degrade |
| 1.3.6.1.4.1.1751.2.18.2.16.1.1.6 | oc3APSPairProtectionSFBERThreshold | 0 | 0 | Bits error Rate threshold to declare signal failure |
| 1.3.6.1.4.1.1751.2.18.2.16.1.1.7 | oc3APSPairProtectionSDBERThreshold | 0 | 0 | Bits error Rate threshold to declare signal degrade |
| 1.3.6.1.4.1.1751.2.18.2.16.1.1.8 | oc3APSPairWTRPeriod | 0 | 0 | Duration for Wait To Restore Period between 5 to 12 minutes. Ref: BellCore GR-253-Core, Issue 3, page 200, R5-56. |
| 1.3.6.1.4.1.1751.2.18.2.16.1.1.9 | oc3APSWorkingSlot | 0 | 0 | Working slot of APS pair. |
| 1.3.6.1.4.1.1751.2.18.2.16.1.1.10 | oc3APSProtectionSlot | 0 | 0 | Protection slot of APS pair. |
| 1.3.6.1.4.1.1751.2.18.2.16.1.1.11 | oc3APSActiveSlot | 0 | 0 | Active slot of APS pair. |
| 1.3.6.1.4.1.1751.2.18.2.16.1.1.12 | oc3APSPairStatus | 0 | 0 | noFailure : The protection line is not in use. modeMismatch : one end is configured unidirectional and the other is bidirection… |
| 1.3.6.1.4.1.1751.2.18.2.16.1.1.13 | oc3APSPairUserCommand | 0 | 0 | APS Pair User Command |
| 1.3.6.1.4.1.1751.2.18.2.16.1.1.14 | oc3APSPairCurrentState | 0 | 0 | Current State of the APS state machine |
| 1.3.6.1.4.1.1751.2.18.2.16.1.1.15 | oc3APSPairWorkingLineSignalStatus | 0 | 0 | Signal Status of the working port (LOS / LOF / LCD / AIS etc.) |
| 1.3.6.1.4.1.1751.2.18.2.16.1.1.16 | oc3APSPairProtectionLineSignalStatus | 0 | 0 | Signal Status of the protection port (LOS / LOF / LCD / AIS etc.) |