ds3 line status:
1: dsx3NoAlarm: No alarm present
2: dsx3RcvRAIFailure: Receiving Yellow/Remote Alarm Indication
4: dsx3XmitRAIAlarm: Transmitting Yellow/Remote Alarm Indication
8: dsx3RcvAIS: Receiving AIS failure state
16: dsx3XmitAIS: Transmitting AIS failure statue
32: dsx3LOF: Receiving LOF failure state
64: dsx3LOS: Reveiving LOS failure state
128: dsx3LoopbackState: Looping the received signal
256: dsx3RcvTestCode: Receiving a Test Pattern
512: dsx3OtherFailure: any line status not defined
1024: dsx3RcvRmtAIS:
2048: dsx3RcvRmtOOF:
4096: dsx3RcvRmtLOS:
8192: dsx3RcvRmtIdle:
16384: dsx3RmtLoopback: Far end remote loopback
Parsed from file ac120.my.V07.00.C00.mib.txt
Company: None
Module: ACMIB
ds3 line status:
1: dsx3NoAlarm: No alarm present
2: dsx3RcvRAIFailure: Receiving Yellow/Remote Alarm Indication
4: dsx3XmitRAIAlarm: Transmitting Yellow/Remote Alarm Indication
8: dsx3RcvAIS: Receiving AIS failure state
16: dsx3XmitAIS: Transmitting AIS failure statue
32: dsx3LOF: Receiving LOF failure state
64: dsx3LOS: Reveiving LOS failure state
128: dsx3LoopbackState: Looping the received signal
256: dsx3RcvTestCode: Receiving a Test Pattern
512: dsx3OtherFailure: any line status not defined
1024: dsx3RcvRmtAIS:
2048: dsx3RcvRmtOOF:
4096: dsx3RcvRmtLOS:
8192: dsx3RcvRmtIdle:
16384: dsx3RmtLoopback: Far end remote loopback
Parsed from file ACMIB.mib
Module: ACMIB
Vendor: Lucent Technologies
Module: ACMIB
[Automatically extracted from oidview.com]
ds3LineStatus OBJECT-TYPE SYNTAX INTEGER (1..32767) MAX-ACCESS read-only STATUS current DESCRIPTION "ds3 line status: 1: dsx3NoAlarm: No alarm present 2: dsx3RcvRAIFailure: Receiving Yellow/Remote Alarm Indication 4: dsx3XmitRAIAlarm: Transmitting Yellow/Remote Alarm Indication 8: dsx3RcvAIS: Receiving AIS failure state 16: dsx3XmitAIS: Transmitting AIS failure statue 32: dsx3LOF: Receiving LOF failure state 64: dsx3LOS: Reveiving LOS failure state 128: dsx3LoopbackState: Looping the received signal 256: dsx3RcvTestCode: Receiving a Test Pattern 512: dsx3OtherFailure: any line status not defined 1024: dsx3RcvRmtAIS: 2048: dsx3RcvRmtOOF: 4096: dsx3RcvRmtLOS: 8192: dsx3RcvRmtIdle: 16384: dsx3RmtLoopback: Far end remote loopback" DEFVAL { 1 } ::= { ds3PortConfigEntry 6 }
ds3LineStatus OBJECT-TYPE SYNTAX INTEGER (1..32767) MAX-ACCESS read-only STATUS current DESCRIPTION "ds3 line status: 1: dsx3NoAlarm: No alarm present 2: dsx3RcvRAIFailure: Receiving Yellow/Remote Alarm Indication 4: dsx3XmitRAIAlarm: Transmitting Yellow/Remote Alarm Indication 8: dsx3RcvAIS: Receiving AIS failure state 16: dsx3XmitAIS: Transmitting AIS failure statue 32: dsx3LOF: Receiving LOF failure state 64: dsx3LOS: Reveiving LOS failure state 128: dsx3LoopbackState: Looping the received signal 256: dsx3RcvTestCode: Receiving a Test Pattern 512: dsx3OtherFailure: any line status not defined 1024: dsx3RcvRmtAIS: 2048: dsx3RcvRmtOOF: 4096: dsx3RcvRmtLOS: 8192: dsx3RcvRmtIdle: 16384: dsx3RmtLoopback: Far end remote loopback" DEFVAL { 1 } ::= { ds3PortConfigEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.18.2.3.1.1 | ds3PortId | 0 | 0 | slot/port: SSPP |
| 1.3.6.1.4.1.1751.2.18.2.3.1.2 | ds3LineType | 0 | 0 | This variable indicates the variety of DS3 C-bit implementing this interface. The type of interface affects the interpretation o… |
| 1.3.6.1.4.1.1751.2.18.2.3.1.3 | ds3LineCoding | 0 | 0 | This variable describes the variety of Zero Code Suppression used on this interface, which in turn affects a number of its charac… |
| 1.3.6.1.4.1.1751.2.18.2.3.1.4 | ds3LoopbackConfig | 0 | 0 | This variable represents the loopback configuration of the DS3 interface. See above diagrams for explanations of loops. |
| 1.3.6.1.4.1.1751.2.18.2.3.1.5 | ds3TransmitClockSource | 0 | 0 | The source of Tranmit Clock. 'loopTiming' indicates that the recovered re- ceive clock is used as the transmit clock. 'localTimin… |
| 1.3.6.1.4.1.1751.2.18.2.3.1.7 | ds3LineBuildOut | 0 | 0 | ds3 line build out |
| 1.3.6.1.4.1.1751.2.18.2.3.1.8 | ds3LineScramble | 0 | 0 | ds3 line scramble |
| 1.3.6.1.4.1.1751.2.18.2.3.1.9 | ds3CellMapping | 0 | 0 | ds3 cell mapping method |
| 1.3.6.1.4.1.1751.2.18.2.3.1.10 | ds3SendCode | 0 | 0 | This variable indicates what type of code is being sent across the ds3 interface by the device. The values mean: 'noCode' - sendi… |
| 1.3.6.1.4.1.1751.2.18.2.3.1.11 | ds3OutputTxRate | 0 | 0 | The ability to adjust the bandwidth of DS3 in tx direction. The adjustable DS3 bandwidth will support 1% increments. |