Timer T399 value - seconds
Parsed from file ac120.my.V07.00.C00.mib.txt
Company: None
Module: ACMIB
Timer T399 value - seconds
Parsed from file ACMIB.mib
Module: ACMIB
Vendor: Lucent Technologies
Module: ACMIB
[Automatically extracted from oidview.com]
atmPnniT399 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T399 value - seconds" DEFVAL { 14 } ::= { atmPnniConfigEntry 18 }
atmPnniT399 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Timer T399 value - seconds" DEFVAL { 14 } ::= { atmPnniConfigEntry 18 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.18.5.16.1.1 | atmPnniIfIndex | 0 | 0 | interface index (slot/port/channel) SSPPCCC |
| 1.3.6.1.4.1.1751.2.18.5.16.1.2 | atmPnniSvcMinVpi | 0 | 0 | The lower bound of the VPI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.3 | atmPnniSvcMaxVpi | 0 | 0 | The upper bound of the VPI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.4 | atmPnniSvcMinVci | 0 | 0 | The lower bound of the VCI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.5 | atmPnniSvcMaxVci | 0 | 0 | The upper bound of the VCI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.6 | atmPnniAdminStatus | 0 | 0 | The administrative action: 'outOfService' means take the PNNI out of service 'inService' means take the PNNI in service 'delete… |
| 1.3.6.1.4.1.1751.2.18.5.16.1.7 | atmPnniOperStatus | 0 | 0 | The operational status of the PNNI: 'outOfService' means the PNNI is out of service 'inService' means the PNNI is in service |
| 1.3.6.1.4.1.1751.2.18.5.16.1.8 | atmPnniT303 | 0 | 0 | Timer T303 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.16.1.9 | atmPnniT308 | 0 | 0 | Timer T308 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.16.1.10 | atmPnniT309 | 0 | 0 | Timer T309 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.16.1.11 | atmPnniT310 | 0 | 0 | Timer T310 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.16.1.12 | atmPnniT313 | 0 | 0 | Timer T313 value - User side only - seconds |
| 1.3.6.1.4.1.1751.2.18.5.16.1.13 | atmPnniT316 | 0 | 0 | Timer T316 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.16.1.14 | atmPnniT317 | 0 | 0 | Timer T317 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.16.1.15 | atmPnniT322 | 0 | 0 | Timer T322 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.16.1.16 | atmPnniT397 | 0 | 0 | Timer T397 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.16.1.17 | atmPnniT398 | 0 | 0 | Timer T398 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.16.1.19 | atmPnniCbrServCatSupp | 0 | 0 | If CBR category is supported |
| 1.3.6.1.4.1.1751.2.18.5.16.1.20 | atmPnniCbrGcacClpEqualZero | 0 | 0 | If the advertised GCAC parameters apply for CLP=0 or CLP=0+1 traffic |
| 1.3.6.1.4.1.1751.2.18.5.16.1.21 | atmPnniCbrMaxCellRate | 0 | 0 | CBR category Maximum Cell Rate |
| 1.3.6.1.4.1.1751.2.18.5.16.1.22 | atmPnniCbrAvailCellRate | 0 | 0 | CBR category Available Cell Rate |
| 1.3.6.1.4.1.1751.2.18.5.16.1.23 | atmPnniCbrCellXerDelay | 0 | 0 | CBR category Cell Transfer Delay |
| 1.3.6.1.4.1.1751.2.18.5.16.1.24 | atmPnniCbrCellLossRatioZero | 0 | 0 | CBR category Cell Loss Ratio for CLP=0 traffic |
| 1.3.6.1.4.1.1751.2.18.5.16.1.25 | atmPnniCbrCellLossRatioZeroPlusOne | 0 | 0 | CBR category Cell Loss Ratio for CLP=0+1 traffic |
| 1.3.6.1.4.1.1751.2.18.5.16.1.26 | atmPnniCbrCellDelayVar | 0 | 0 | CBR category Cell Delay Variation |
| 1.3.6.1.4.1.1751.2.18.5.16.1.27 | atmPnniRtVbrServCatSupp | 0 | 0 | If RT VBR category is supported |
| 1.3.6.1.4.1.1751.2.18.5.16.1.28 | atmPnniRtVbrGcacClpEqualZero | 0 | 0 | If the advertised GCAC parameters apply for CLP=0 or CLP=0+1 traffic |
| 1.3.6.1.4.1.1751.2.18.5.16.1.29 | atmPnniRtVbrMaxCellRate | 0 | 0 | RT VBR category Maximum Cell Rate |
| 1.3.6.1.4.1.1751.2.18.5.16.1.30 | atmPnniRtVbrAvailCellRate | 0 | 0 | RT VBR category Available Cell Rate |
| 1.3.6.1.4.1.1751.2.18.5.16.1.31 | atmPnniRtVbrCellXerDelay | 0 | 0 | RT VBR category Cell Transfer Delay |
| 1.3.6.1.4.1.1751.2.18.5.16.1.32 | atmPnniRtVbrCellLossRatioZero | 0 | 0 | RT VBR category Cell Loss Ratio for CLP=0 traffic |
| 1.3.6.1.4.1.1751.2.18.5.16.1.33 | atmPnniRtVbrCellLossRatioZeroPlusOne | 0 | 0 | RT VBR category Cell Loss Ratio for CLP=0+1 traffic |
| 1.3.6.1.4.1.1751.2.18.5.16.1.34 | atmPnniRtVbrCellDelayVar | 0 | 0 | RT VBR category Cell Delay Variation |
| 1.3.6.1.4.1.1751.2.18.5.16.1.35 | atmPnniRtVbrGcacPresent | 0 | 0 | If RT VBR category GCAC Parameters present |
| 1.3.6.1.4.1.1751.2.18.5.16.1.36 | atmPnniRtVbrCellRateMargin | 0 | 0 | RT VBR category Cell Rate Margin |
| 1.3.6.1.4.1.1751.2.18.5.16.1.37 | atmPnniRtVbrVarianceFactor | 0 | 0 | RT VBR category Variance Factor |
| 1.3.6.1.4.1.1751.2.18.5.16.1.38 | atmPnniNrtVbrServCatSupp | 0 | 0 | If NRT VBR category is supported |
| 1.3.6.1.4.1.1751.2.18.5.16.1.39 | atmPnniNrtVbrGcacClpEqualZero | 0 | 0 | If the advertised GCAC parameters apply for CLP=0 or CLP=0+1 traffic |
| 1.3.6.1.4.1.1751.2.18.5.16.1.40 | atmPnniNrtVbrMaxCellRate | 0 | 0 | NRT VBR category Maximum Cell Rate |
| 1.3.6.1.4.1.1751.2.18.5.16.1.41 | atmPnniNrtVbrAvailCellRate | 0 | 0 | NRT VBR category Available Cell Rate |
| 1.3.6.1.4.1.1751.2.18.5.16.1.42 | atmPnniNrtVbrCellXerDelay | 0 | 0 | NRT VBR category Cell Transfer Delay |
| 1.3.6.1.4.1.1751.2.18.5.16.1.43 | atmPnniNrtVbrCellLossRatioZero | 0 | 0 | NRT VBR category Cell Loss Ratio for CLP=0 traffic |
| 1.3.6.1.4.1.1751.2.18.5.16.1.44 | atmPnniNrtVbrCellLossRatioZeroPlusOne | 0 | 0 | NRT VBR category Cell Loss Ratio for CLP=0+1 traffic |
| 1.3.6.1.4.1.1751.2.18.5.16.1.45 | atmPnniNrtVbrGcacPresent | 0 | 0 | If NRT VBR category GCAC Parameters present |
| 1.3.6.1.4.1.1751.2.18.5.16.1.46 | atmPnniNrtVbrCellRateMargin | 0 | 0 | NRT VBR category Cell Rate Margin |
| 1.3.6.1.4.1.1751.2.18.5.16.1.47 | atmPnniNrtVbrVarianceFactor | 0 | 0 | NRT VBR category Variance Factor |
| 1.3.6.1.4.1.1751.2.18.5.16.1.48 | atmPnniAbrServCatSupp | 0 | 0 | If ABR category is supported |
| 1.3.6.1.4.1.1751.2.18.5.16.1.49 | atmPnniAbrMaxCellRate | 0 | 0 | ABR category Maximum Cell Rate |
| 1.3.6.1.4.1.1751.2.18.5.16.1.50 | atmPnniAbrAvailCellRate | 0 | 0 | ABR category Available Cell Rate |
| 1.3.6.1.4.1.1751.2.18.5.16.1.51 | atmPnniUbrServCatSupp | 0 | 0 | UBR category Cell Transfer Delay |
| 1.3.6.1.4.1.1751.2.18.5.16.1.52 | atmPnniUbrMaxCellRate | 0 | 0 | NRT VBR category Cell Loss Ratio for CLP=0 traffic |
| 1.3.6.1.4.1.1751.2.18.5.16.1.53 | atmPnniOverSubscription | 0 | 0 | Over subscription factor for PNNI Intf. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.54 | atmPnniSgnlEnabled | 0 | 0 | Indicates if atm signaling is enabled or disabled for this PNNI interface. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.55 | atmPnniVpiSig | 0 | 0 | VPI value for the signalling channel for the PNNI interface. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.56 | atmPnniVciSig | 0 | 0 | VCI value for the signalling channel for the PNNI interface. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.57 | atmPnniAvailBwIgr | 0 | 0 | The Avail Bandwidth for that interface in cells per sec. Bandwidth for UBR conns will not be accounted for. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.58 | atmPnniAvailBwEgr | 0 | 0 | The Avail Bandwidth for that interface in cells per sec. Bandwidth for UBR conns will not be accounted for. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.59 | atmPnniUPCSupp | 0 | 0 | upc supp off/on |
| 1.3.6.1.4.1.1751.2.18.5.16.1.60 | atmPnniUbrLoadBalSupp | 0 | 0 | load balancing supp for ubr conns off/on |
| 1.3.6.1.4.1.1751.2.18.5.16.1.61 | atmPnniSscopRxWndSz | 0 | 0 | The receive window size for the SSCOP layer |
| 1.3.6.1.4.1.1751.2.18.5.16.1.62 | atmPnniRemoteSvcMinVpi | 0 | 0 | The lower bound of the actual VPI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.63 | atmPnniRemoteSvcMaxVpi | 0 | 0 | The Upper bound of the actual VPI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.64 | atmPnniRemoteSvcMinVci | 0 | 0 | The lower bound of the actual VCI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.65 | atmPnniRemoteSvcMaxVci | 0 | 0 | The Upper bound of the actual VCI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.66 | atmPnniVpiIlmi | 0 | 0 | VPI value for the ilmi channel for the PNNI interface. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.67 | atmPnniVciIlmi | 0 | 0 | VCI value for the ilmi channel for the PNNI interface. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.68 | atmPnniIlmiProtocolStatus | 0 | 0 | The administrative status: 'enabled' - ILMI protocol enabled on PNNI 'disabled' - ILMI protocol disabled on PNNI . |
| 1.3.6.1.4.1.1751.2.18.5.16.1.69 | atmPnniIlmiOperStatus | 0 | 0 | The operational status: 'outOfService' - ILMI connectivity is down 'inService' - ILMI connectivity is up. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.70 | atmPnniIlmiConfigProc | 0 | 0 | ILMI Configuration Procedure status. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.71 | atmPnniIlmiConnectProc | 0 | 0 | ILMI Connectivity Procedure status. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.72 | atmPnniIlmiAttachPtProc | 0 | 0 | ILMI Attachment Point Procedure status. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.73 | atmPnniIlmiSecureLinkProc | 0 | 0 | ILMI Secure Link Procedure status. Can be enabled only if Attachment Point Procedure is enabled. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.74 | atmPnniIlmiAddrRegProc | 0 | 0 | ILMI Address Registration Procedure status. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.75 | atmPnniIlmiTimerS | 0 | 0 | Timer S (secs). Used to poll peer when link is down. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.76 | atmPnniIlmiTimerT | 0 | 0 | Timer T (secs). Used to poll peer when link is up. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.77 | atmPnniIlmiRetryK | 0 | 0 | Retry K - number of timeouts of before link is declared down. |
| 1.3.6.1.4.1.1751.2.18.5.16.1.78 | atmPnniConnTrafficShapingFlag | 0 | 0 | Traffic Shaping for Conn was enabled primarily because the core would lose cells since we were non-conformant cells. Therefore the… |