Indicates if atm signaling is enabled or disabled
for this interface. Consistent with other AC interfaces
Parsed from file ac120.my.V07.00.C00.mib.txt
Company: None
Module: ACMIB
Indicates if atm signaling is enabled or disabled
for this interface. Consistent with other AC interfaces
Parsed from file ACMIB.mib
Module: ACMIB
Vendor: Lucent Technologies
Module: ACMIB
[Automatically extracted from oidview.com]
atmVnnAtmSignalingStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if atm signaling is enabled or disabled for this interface. Consistent with other AC interfaces" ::= { atmVnnConfigEntry 27 }
atmVnnAtmSignalingStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if atm signaling is enabled or disabled for this interface. Consistent with other AC interfaces" ::= { atmVnnConfigEntry 27 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.18.5.17.1.1 | atmVnnIfIndex | 0 | 0 | interface index (slot/port/channel) SSPPCCC |
| 1.3.6.1.4.1.1751.2.18.5.17.1.2 | atmVnnAddrType | 0 | 0 | atm address type |
| 1.3.6.1.4.1.1751.2.18.5.17.1.3 | atmVnnSvcMinVpi | 0 | 0 | The lower bound of the VPI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.17.1.4 | atmVnnSvcMaxVpi | 0 | 0 | The upper bound of the VPI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.17.1.5 | atmVnnSvcMinVci | 0 | 0 | The lower bound of the VCI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.17.1.6 | atmVnnSvcMaxVci | 0 | 0 | The upper bound of the VCI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.17.1.7 | atmVnnAdminStatus | 0 | 0 | The administrative action: 'outOfService' means take the UNI out of service 'inService' means take the UNI in service 'delete' … |
| 1.3.6.1.4.1.1751.2.18.5.17.1.8 | atmVnnOperStatus | 0 | 0 | The operational status of the UNI: 'outOfService' means the UNI is out of service 'inService' means the UNI is in service |
| 1.3.6.1.4.1.1751.2.18.5.17.1.9 | atmVnnOverSubscription | 0 | 0 | Over subscription factor |
| 1.3.6.1.4.1.1751.2.18.5.17.1.10 | atmVnnNwPrefix1 | 0 | 0 | ATM Network Prefix 1 |
| 1.3.6.1.4.1.1751.2.18.5.17.1.11 | atmVnnT303 | 0 | 0 | Timer T303 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.17.1.12 | atmVnnT308 | 0 | 0 | Timer T308 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.17.1.13 | atmVnnT309 | 0 | 0 | Timer T309 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.17.1.14 | atmVnnT310 | 0 | 0 | Timer T310 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.17.1.15 | atmVnnT313 | 0 | 0 | Timer T313 value - User side only - seconds |
| 1.3.6.1.4.1.1751.2.18.5.17.1.16 | atmVnnT316 | 0 | 0 | Timer T316 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.17.1.17 | atmVnnT317 | 0 | 0 | Timer T317 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.17.1.18 | atmVnnT322 | 0 | 0 | Timer T322 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.17.1.19 | atmVnnT398 | 0 | 0 | Timer T398 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.17.1.20 | atmVnnT399 | 0 | 0 | Timer T399 value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.17.1.21 | atmVnnMyNeighborIpAddress | 0 | 0 | The IP address of the neighbor system connected to the far end of this interface, to which a Network Management Station can send … |
| 1.3.6.1.4.1.1751.2.18.5.17.1.22 | atmVnnMyNeighborIfName | 0 | 0 | The textual name of the interface on the neighbor system on the far end of this interface, and to which this interface connects. … |
| 1.3.6.1.4.1.1751.2.18.5.17.1.23 | atmVnnVpiSig | 0 | 0 | VPI value for the signalling channel for the UNI interface. |
| 1.3.6.1.4.1.1751.2.18.5.17.1.24 | atmVnnVciSig | 0 | 0 | VCI value for the signalling channel for the UNI interface. |
| 1.3.6.1.4.1.1751.2.18.5.17.1.25 | atmVnnVpiIlmi | 0 | 0 | VPI value for the ilmi channel for the UNI interface. |
| 1.3.6.1.4.1.1751.2.18.5.17.1.26 | atmVnnVciIlmi | 0 | 0 | VCI value for the ilmi channel for the UNI interface. |
| 1.3.6.1.4.1.1751.2.18.5.17.1.28 | atmVnnMyIfName | 0 | 0 | A textual name of this interface. If this system is manageable manageable through SNMP and supports the object ifName, the value… |
| 1.3.6.1.4.1.1751.2.18.5.17.1.29 | atmVnnIlmiProtocolStatus | 0 | 0 | The administrative status: 'enabled' - ILMI protocol enabled on UNI. |
| 1.3.6.1.4.1.1751.2.18.5.17.1.30 | atmVnnIlmiOperStatus | 0 | 0 | The operational status: 'outOfService' - ILMI connectivity is down 'inService' - ILMI connectivity is up. |
| 1.3.6.1.4.1.1751.2.18.5.17.1.31 | atmVnnIlmiConfigProc | 0 | 0 | ILMI Configuration Procedure status. |
| 1.3.6.1.4.1.1751.2.18.5.17.1.32 | atmVnnIlmiConnectProc | 0 | 0 | ILMI Connectivity Procedure status. |
| 1.3.6.1.4.1.1751.2.18.5.17.1.33 | atmVnnIlmiAttachPtProc | 0 | 0 | ILMI Attachment Point Procedure status. |
| 1.3.6.1.4.1.1751.2.18.5.17.1.34 | atmVnnIlmiSecureLinkProc | 0 | 0 | ILMI Secure Link Procedure status. Can be enabled only if Attachment Point Procedure is enabled. |
| 1.3.6.1.4.1.1751.2.18.5.17.1.35 | atmVnnIlmiAddrRegProc | 0 | 0 | ILMI Address Registration Procedure status. |
| 1.3.6.1.4.1.1751.2.18.5.17.1.36 | atmVnnIlmiTimerS | 0 | 0 | Timer S (secs). Used to poll peer when link is down. |
| 1.3.6.1.4.1.1751.2.18.5.17.1.37 | atmVnnIlmiTimerT | 0 | 0 | Timer T (secs). Used to poll peer when link is up. |
| 1.3.6.1.4.1.1751.2.18.5.17.1.38 | atmVnnIlmiRetryK | 0 | 0 | Retry K - number of timeouts before link is declared down. |
| 1.3.6.1.4.1.1751.2.18.5.17.1.39 | atmVnnAvailBwIgr | 0 | 0 | The Avail Bandwidth for that interface in cells per sec. Bandwidth for UBR conns will not be accounted for. |
| 1.3.6.1.4.1.1751.2.18.5.17.1.40 | atmVnnAvailBwEgr | 0 | 0 | The Avail Bandwidth for that interface in cells per sec. Bandwidth for UBR conns will not be accounted for. |
| 1.3.6.1.4.1.1751.2.18.5.17.1.41 | atmVnnUPCSupp | 0 | 0 | upc supp off/on |
| 1.3.6.1.4.1.1751.2.18.5.17.1.42 | atmVnnUbrLoadBalSupp | 0 | 0 | load balancing supp for ubr conns off/on |
| 1.3.6.1.4.1.1751.2.18.5.17.1.43 | atmVnnSscopRxWndSz | 0 | 0 | The receive window size for the SSCOP layer |