Allow for the 'reserved' bandwidth allocated
to oversubscribe the line by up to a factor
of 10 . Generally, a figure of between 1 and 4
is normally a safe bet, although higher levels
are often acceptable.
Parsed from file ac120.my.V07.00.C00.mib.txt
Company: None
Module: ACMIB
Allow for the 'reserved' bandwidth allocated
to oversubscribe the line by up to a factor
of 10 . Generally, a figure of between 1 and 4
is normally a safe bet, although higher levels
are often acceptable.
Parsed from file ACMIB.mib
Module: ACMIB
Vendor: Lucent Technologies
Module: ACMIB
[Automatically extracted from oidview.com]
frUniOverSubscription OBJECT-TYPE SYNTAX INTEGER (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION " Allow for the 'reserved' bandwidth allocated to oversubscribe the line by up to a factor of 10 . Generally, a figure of between 1 and 4 is normally a safe bet, although higher levels are often acceptable." DEFVAL { 10 } ::= { frUniConfigEntry 6 }
frUniOverSubscription OBJECT-TYPE SYNTAX INTEGER (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION " Allow for the 'reserved' bandwidth allocated to oversubscribe the line by up to a factor of 10 . Generally, a figure of between 1 and 4 is normally a safe bet, although higher levels are often acceptable." DEFVAL { 10 } ::= { frUniConfigEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.18.5.6.1.1 | frUniIfIndex | 0 | 0 | interface index (slot/port/channel) SSPPCCC |
| 1.3.6.1.4.1.1751.2.18.5.6.1.2 | frUniAddrDlciLen | 0 | 0 | Length of Data Link connection identify of frame relay UNI address |
| 1.3.6.1.4.1.1751.2.18.5.6.1.3 | frUniDlcmiState | 0 | 0 | The state of Data Link Connection Management Indentify of frame relay UNI. |
| 1.3.6.1.4.1.1751.2.18.5.6.1.4 | frUniAdminStatus | 0 | 0 | The administrative action: 'outOfService' take the interface out of service 'inService' take the interface in service 'delete' … |
| 1.3.6.1.4.1.1751.2.18.5.6.1.5 | frUniOperStatus | 0 | 0 | The operational status of the interface: 'outOfService' interface is out of service 'inService' interface is in service |
| 1.3.6.1.4.1.1751.2.18.5.6.1.7 | frUniLmiProtocol | 0 | 0 | Lmi protocol to run |
| 1.3.6.1.4.1.1751.2.18.5.6.1.8 | frUniInterworkingType | 0 | 0 | frf5 - fr/atm network interworking frf8 - fr/atm service interworking |
| 1.3.6.1.4.1.1751.2.18.5.6.1.9 | frUniN391 | 0 | 0 | full status polling counter. DTE:Mandatory, DCE:N/A |
| 1.3.6.1.4.1.1751.2.18.5.6.1.10 | frUniN392 | 0 | 0 | error threshold. DTE:Mandatory, DCE:Mandatory |
| 1.3.6.1.4.1.1751.2.18.5.6.1.11 | frUniN393 | 0 | 0 | Monitored event count. DTE:Mandatory, DCE:N/A |
| 1.3.6.1.4.1.1751.2.18.5.6.1.12 | frUniT391 | 0 | 0 | Link integrity verification timer. DTE:Mandatory, DCE:N/A |
| 1.3.6.1.4.1.1751.2.18.5.6.1.13 | frUniT392 | 0 | 0 | Polling verification timer. DTE:N/A, DCE:Mandatory |
| 1.3.6.1.4.1.1751.2.18.5.6.1.14 | frUniAsyncLmi | 0 | 0 | Async PVC status messages |
| 1.3.6.1.4.1.1751.2.18.5.6.1.15 | frLmiOperStatus | 0 | 0 | The operational status of the lmi protocol: 'outOfService' interface is out of service 'inService' interface is in service |
| 1.3.6.1.4.1.1751.2.18.5.6.1.16 | frUniNT3 | 0 | 0 | Message frequency timer relevant for ATT LMI only. |
| 1.3.6.1.4.1.1751.2.18.5.6.1.17 | frUniThroughPut | 0 | 0 | The throughput bandwidth of the interface: 'k64' means a throughput of 64 kb 'k56' means a throughput of 56 kb |