Valid cells received (Input Billing Count)
Parsed from file ac120.my.V07.00.C00.mib.txt
Company: None
Module: ACMIB
Valid cells received (Input Billing Count)
Parsed from file ACMIB.mib
Module: ACMIB
Vendor: Lucent Technologies
Module: ACMIB
[Automatically extracted from oidview.com]
atmAtmSpvcVpcStatsInOdometerCellCountHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { atmAtmSpvcVpcEntry 43 }
atmAtmSpvcVpcStatsInOdometerCellCountHiA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Valid cells received (Input Billing Count)" ::= { atmAtmSpvcVpcEntry 43 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.18.6.38.1.1 | atmAtmSpvcVpcVpiA | 0 | 0 | VPI value for side A of an ATM SPVC VPC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.2 | atmAtmSpvcVpcRemoteAtmPortAddr | 0 | 0 | Remote ATM port NSAP address, not meaningful if passive type of connection. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.3 | atmAtmSpvcVpcIfB | 0 | 0 | Interface index for side B of an ATM SPVC VPC connection. Number value is interpreted as an interface of the form, SSPPCCC, wher… |
| 1.3.6.1.4.1.1751.2.18.6.38.1.4 | atmAtmSpvcVpcVpiB | 0 | 0 | VPI value for side B of an ATM SPVC VPC connection. Valid range is a number between 0 and 4095. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.5 | atmAtmSpvcVpcServiceTypeA2B | 0 | 0 | Service type, ATM port. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.6 | atmAtmSpvcVpcSarTypeA2B | 0 | 0 | SAR type used in ATM adaption, ATM port. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.7 | atmAtmSpvcVpcPeakCellRateA2B | 0 | 0 | Peak cell rate - side A, ATM port, in cells per second. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.8 | atmAtmSpvcVpcSusCellRateA2B | 0 | 0 | Sustained cell rate - side A, ATM port, in cells per second. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.9 | atmAtmSpvcVpcMaxBurstSizeA2B | 0 | 0 | Maximum burst size - side A, ATM port, in cells per second. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.10 | atmAtmSpvcVpcFrwdErrCorrectionA2B | 0 | 0 | Forward error correction scheme, ATM port side. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.11 | atmAtmSpvcVpcServiceTypeB2A | 0 | 0 | Service type, ATM trunk side. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.12 | atmAtmSpvcVpcSarTypeB2A | 0 | 0 | SAR type used in ATM adaption, ATM trunk side. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.13 | atmAtmSpvcVpcPeakCellRateB2A | 0 | 0 | Peak cell rate - side B, ATM trunk, in cells per second. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.14 | atmAtmSpvcVpcSusCellRateB2A | 0 | 0 | Sustained cell rate - side B, ATM trunk, in cells per second. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.15 | atmAtmSpvcVpcMaxBurstSizeB2A | 0 | 0 | Maximum burst size - side A, ATM trunk, in cells per second. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.16 | atmAtmSpvcVpcFrwdErrCorrectionB2A | 0 | 0 | Forward error correction scheme, ATM trunk side. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.17 | atmAtmSpvcVpcFlow | 0 | 0 | Type of flow, pointToMultipointA2B is for future support. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.18 | atmAtmSpvcVpcType | 0 | 0 | Type of connection. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.19 | atmAtmSpvcVpcConnType | 0 | 0 | The type of connection: activeSvc - attempt calls, whenever not established. passiveSvc - accept calls. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.20 | atmAtmSpvcVpcLeafReference | 0 | 0 | An arbitrary integer which serves to distinguish the mulitple leaves attached to a root of a point-to-multipoint SPVC. If point-… |
| 1.3.6.1.4.1.1751.2.18.6.38.1.21 | atmAtmSpvcVpcOperStatus | 0 | 0 | The operation status of the connection: other - none of the types specified below. establishmentInProgress - connection is not ope… |
| 1.3.6.1.4.1.1751.2.18.6.38.1.22 | atmAtmSpvcVpcRowStatus | 0 | 0 | Used to create and delete a soft PVC. When this object is set to 'active', an attempt is made to set up the soft PVC. When this… |
| 1.3.6.1.4.1.1751.2.18.6.38.1.23 | atmAtmSpvcVpcRemoteSelectType | 0 | 0 | Indicates whether the remote VPI values are to be used at the destination. If 'any' is used, the destination switch will choose … |
| 1.3.6.1.4.1.1751.2.18.6.38.1.24 | atmAtmSpvcVpcRemoteVpi | 0 | 0 | VPI value to be used at the destination of an ATM SPVC VPC connection. Valid range is a number between 0 and 4095. If atmAtmSpv… |
| 1.3.6.1.4.1.1751.2.18.6.38.1.25 | atmAtmSpvcVpcRetryInterval | 0 | 0 | The time to wait before attempting to establish the SVC after a previous failed call attempt. A value of 0 indicates retries wil… |
| 1.3.6.1.4.1.1751.2.18.6.38.1.26 | atmAtmSpvcVpcRetryLimit | 0 | 0 | A maximum limit on how many retries should be attempted. A value of 0 indicates no limit. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.27 | atmAtmSpvcVpcRestart | 0 | 0 | The active SVC is released, if necessary, and a new setup procedure is begun if 'restart', otherwise, noop. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.28 | atmAtmSpvcVpcRetryFailure | 0 | 0 | Indicates how many attempts to establish the connection have failed. It it reset whenever a connection is successfully establish… |
| 1.3.6.1.4.1.1751.2.18.6.38.1.29 | atmAtmSpvcVpcReleaseCause | 0 | 0 | CAUSE field value of the last RELEASE message received for this SVC. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.30 | atmAtmSpvcVpcReleaseDiag | 0 | 0 | DIAGNOSTICS field value of the last RELEASE message received for this SVC. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.31 | atmAtmSpvcVpcRelease | 0 | 0 | Release the connnection established on the endpoint and if the endpoint is Active, do not retry. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.32 | atmAtmSpvcVpcStatsInCellCountHiA | 0 | 0 | Valid Cells received on A - (High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.38.1.33 | atmAtmSpvcVpcStatsInCellCountLoA | 0 | 0 | Valid Cells received on A - (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.38.1.34 | atmAtmSpvcVpcStatsOutCellCountHiA | 0 | 0 | Valid cells transmitted on A -(High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.38.1.35 | atmAtmSpvcVpcStatsOutCellCountLoA | 0 | 0 | Valid cells transmitted on A -(Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.38.1.36 | atmAtmSpvcVpcStatsInCellCountHiB | 0 | 0 | Valid Cells received on B - (High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.38.1.37 | atmAtmSpvcVpcStatsInCellCountLoB | 0 | 0 | Valid Cells received on B - (Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.38.1.38 | atmAtmSpvcVpcStatsOutCellCountHiB | 0 | 0 | Valid cells transmitted on B -(High order portion) |
| 1.3.6.1.4.1.1751.2.18.6.38.1.39 | atmAtmSpvcVpcStatsOutCellCountLoB | 0 | 0 | Valid cells transmitted on B -(Low order portion) |
| 1.3.6.1.4.1.1751.2.18.6.38.1.40 | atmAtmSpvcVpcStatsTimer | 0 | 0 | Number of seconds stats have been collecting |
| 1.3.6.1.4.1.1751.2.18.6.38.1.41 | atmAtmSpvcVpcStatsFrwdErrCrrctnRateA2B | 0 | 0 | Displays the Forward error correction rate being used by the FEC module in the A2B direction. This field is dynamic when Auto ra… |
| 1.3.6.1.4.1.1751.2.18.6.38.1.42 | atmAtmSpvcVpcStatsFrwdErrCrrctnRateB2A | 0 | 0 | Displays the Forward error correction rate being used by the FEC module in the B2A direction. This field is dynamic when Auto ra… |
| 1.3.6.1.4.1.1751.2.18.6.38.1.44 | atmAtmSpvcVpcStatsInOdometerCellCountLoA | 0 | 0 | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.38.1.45 | atmAtmSpvcVpcStatsOutOdometerCellCountHiA | 0 | 0 | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.38.1.46 | atmAtmSpvcVpcStatsOutOdometerCellCountLoA | 0 | 0 | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.38.1.47 | atmAtmSpvcVpcStatsInOdometerCellCountHiB | 0 | 0 | Valid cells received (Input Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.38.1.48 | atmAtmSpvcVpcStatsInOdometerCellCountLoB | 0 | 0 | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.38.1.49 | atmAtmSpvcVpcStatsOutOdometerCellCountHiB | 0 | 0 | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.38.1.50 | atmAtmSpvcVpcStatsOutOdometerCellCountLoB | 0 | 0 | Valid cells transmitted (Output Billing Count) |
| 1.3.6.1.4.1.1751.2.18.6.38.1.51 | atmAtmSpvcVpcStatsOdometerTimer | 0 | 0 | Number of seconds since odometer was reset. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.52 | atmAtmSpvcVpcStatsOdometerReset | 0 | 0 | Odometer reset button. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.53 | atmAtmSpvcVpcViA | 0 | 0 | VI to associate the Egress part of the B2A connection . |
| 1.3.6.1.4.1.1751.2.18.6.38.1.54 | atmAtmSpvcVpcViB | 0 | 0 | VI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.38.1.55 | atmAtmSpvcVpcStatsCellsDroppedA | 0 | 0 | Cells Dropped on the Incoming side of A |
| 1.3.6.1.4.1.1751.2.18.6.38.1.56 | atmAtmSpvcVpcStatsCellsTaggedA | 0 | 0 | Cells Tagged on the Incoming side of A |
| 1.3.6.1.4.1.1751.2.18.6.38.1.57 | atmAtmSpvcVpcStatsCellsDroppedB | 0 | 0 | Cells Dropped on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.6.38.1.58 | atmAtmSpvcVpcStatsCellsTaggedB | 0 | 0 | Cells Tagged on the Incoming side of B |
| 1.3.6.1.4.1.1751.2.18.6.38.1.59 | atmAtmSpvcVpcVUNIA | 0 | 0 | VUNI to associate the Egress part of the B2A connection . |
| 1.3.6.1.4.1.1751.2.18.6.38.1.60 | atmAtmSpvcVpcVUNIB | 0 | 0 | VUNI to associate the Egress part of the A2B connection . |
| 1.3.6.1.4.1.1751.2.18.6.38.1.61 | atmAtmSpvcVpcTrafficShapingA2B | 0 | 0 | Traffic Shaping Support in the A2B direction. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.62 | atmAtmSpvcVpcTrafficShapingB2A | 0 | 0 | Traffic Shaping Support in the B2A direction. |
| 1.3.6.1.4.1.1751.2.18.6.38.1.63 | atmAtmSpvcVpcPriority | 0 | 0 | Priority of SPVC - priority-1 being highest priority . |