Enables/Disables the feature of setting the Data
Terminal Loop Back in response to input on the Local
Loop Back Pin of the V.35 or EIA 530 interface.
Possible values are:
VALUE DESCRIPTION
dcLLPinEnabled(1) Enable LL Pin to activate LB
dcLLPinDisabled(2) Disnable LL Pin from activating LB
Parsed from file datasmart_14304.mib.txt
Company: adc_kentrox
Module: DATASMART-MIB
Vendor: ADC Kentrox
Module: DATASMART-MIB (datasmart.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
dsDcLLPin OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables/Disables the feature of setting the Data Terminal Loop Back in response to input on the Local Loop Back Pin of the V.35 or EIA 530 interface. Possible values are: VALUE DESCRIPTION dcLLPinEnabled(1) Enable LL Pin to activate LB dcLLPinDisabled(2) Disnable LL Pin from activating LB" ::= { dsDcEntry 9 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.181.2.2.7.1.1.1 | dsDcIndex | 0 | 0 | The index to the Data Port Configuration Table. The possible values are 1 through 2. |
| 1.3.6.1.4.1.181.2.2.7.1.1.2 | dsDcDataInvert | 0 | 0 | The data inversion of the data port. The possible values are: VALUE DESCRIPTION dcDataInvertEnable(1) Invert t… |
| 1.3.6.1.4.1.181.2.2.7.1.1.3 | dsDcInterface | 0 | 0 | The type of electrical interface the data port is using. The possible values are: VALUE DESCRIPTION dcV35Interface… |
| 1.3.6.1.4.1.181.2.2.7.1.1.4 | dsDcClockSource | 0 | 0 | The clock source for the data port. The possible values are: VALUE DESCRIPTION dcInternalClock(1) Use the inte… |
| 1.3.6.1.4.1.181.2.2.7.1.1.5 | dsDcXmtClkInvert | 0 | 0 | The inversion status of the transmit clock signal for the data port. The possible values are: VALUE DESCRIPTION… |
| 1.3.6.1.4.1.181.2.2.7.1.1.6 | dsDcRcvClkInvert | 0 | 0 | The inversion status of the received clock signal for the data port. The possible values are: VALUE DESCRIPTION… |
| 1.3.6.1.4.1.181.2.2.7.1.1.7 | dsDcIdleChar | 0 | 0 | The idle character to use for the data port. The possible values are: VALUE DESCRIPTION dc7eIdleChar(1) The idle cha… |
| 1.3.6.1.4.1.181.2.2.7.1.1.8 | dsDcLOSInput | 0 | 0 | The combination of RTS and DTR that will cause a data port Loss of Signal alarm. The possible values are: VALUE DESCRIPTI… |