OID reference
1.3.6.1.4.1.1918.2.13.10.60.20
The total current output by all rectifiers. This value may be measured by the rectifier current shunt(s) if present, calculated from the other system currents or determined from the rectifier reported currents.
Identification
{1 3 6 1 4 1 1918 2 13 10 60 20}
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rectifier-Current OBJECT-TYPE
SYNTAX Float
UNITS "A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total current output by all rectifiers. This value may be measured by the rectifier current shunt(s) if present, calculated from the other system currents or determined from the rectifier reported currents."
::= { rectifiers 20 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The total current output by all rectifiers. This value may be measured by the rectifier current shunt(s) if present, calculated from the other system currents or determined from the rectifier reported currents.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rectifier-Current
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rectifier-Current",
"OBJECT-TYPE",
"SYNTAX",
"Float",
"UNITS",
[
"literal",
"224122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The total current output by all rectifiers. This value may be measured by the rectifier current shunt(s) if present, calculated from the other system currents or determined from the rectifier reported currents.\"",
"::=",
"{",
"rectifiers",
"20",
"}"
],
"syntax_tree": [
[
"row",
"Float"
],
[
"UNITS",
"A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The total current output by all rectifiers. This value may be measured by the rectifier current shunt(s) if present, calculated from the other system currents or determined from the rectifier reported currents."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: RPS-SC200-MIB
See published definition above
{'RFC-1213': ['DisplayString'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['enterprises', 'IpAddress', 'TimeTicks', 'OBJECT-TYPE', 'mib-2', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-IDENTITY', 'Integer32', 'Counter32']}Related source files and packages:
Same file in Observium Community.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1918.2.13.10.60.10 | number-Of-Registered-Rectifiers | 0 | 0 | |
| 1.3.6.1.4.1.1918.2.13.10.60.13 | number-Of-Rectifiers-Failed | 0 | 0 | |
| 1.3.6.1.4.1.1918.2.13.10.60.17 | number-Of-Rectifiers-Comms-Lost | 0 | 0 | |
| 1.3.6.1.4.1.1918.2.13.10.60.23 | rectifier-Current-Limit | 0 | 0 | |
| 1.3.6.1.4.1.1918.2.13.10.60.26 | enable-Current-Share | 0 | 0 | |
| 1.3.6.1.4.1.1918.2.13.10.60.29 | highest-Rectifier-Heatsink-Temperature | 0 | 0 | |
| 1.3.6.1.4.1.1918.2.13.10.60.30 | rectifier-Values-Table | 1 | 21 | |
| 1.3.6.1.4.1.1918.2.13.10.60.55 | rectifier-Shutdown-Mode | 0 | 0 | |
| 1.3.6.1.4.1.1918.2.13.10.60.60 | restart-All-Rectifiers | 0 | 0 | |
| 1.3.6.1.4.1.1918.2.13.10.60.70 | load-Based-Rectifier-Shutdown-Config | 4 | 4 | |
| 1.3.6.1.4.1.1918.2.13.10.60.80 | ramp-Up-Slope | 0 | 0 | |
| 1.3.6.1.4.1.1918.2.13.10.60.90 | ovsd-Set-Point | 0 | 0 | |
| 1.3.6.1.4.1.1918.2.13.10.60.110 | rectifier-Start-Up-Delay | 0 | 0 |