OID reference
1.3.6.1.4.1.1918.2.13.10.60.26
When enabled, the rectifier output voltages are adjusted to even (approximately) their output currents. Disable this function if different rectifiers are supplying independent loads. This function should normally be enabled.
Identification
{1 3 6 1 4 1 1918 2 13 10 60 26}
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
enable-Current-Share OBJECT-TYPE
SYNTAX Enable-State
MAX-ACCESS read-write
STATUS current
DESCRIPTION "When enabled, the rectifier output voltages are adjusted to even (approximately) their output currents. Disable this function if different rectifiers are supplying independent loads. This function should normally be enabled."
DEFVAL { enabled }
::= { rectifiers 26 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
When enabled, the rectifier output voltages are adjusted to even (approximately) their output currents. Disable this function if different rectifiers are supplying independent loads. This function should normally be enabled.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: enable-Current-Share
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"enable-Current-Share",
"OBJECT-TYPE",
"SYNTAX",
"Enable-State",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"When enabled, the rectifier output voltages are adjusted to even (approximately) their output currents. Disable this function if different rectifiers are supplying independent loads. This function should normally be enabled.\"",
"DEFVAL",
"{",
"enabled",
"}",
"::=",
"{",
"rectifiers",
"26",
"}"
],
"syntax_tree": [
[
"row",
"Enable-State"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"When enabled, the rectifier output voltages are adjusted to even (approximately) their output currents. Disable this function if different rectifiers are supplying independent loads. This function should normally be enabled."
],
null,
null,
null,
[
"DEFVAL",
"enabled"
]
]
}Vendor MIB copy from the LibreNMS archive.
Module: RPS-SC200-MIB
See published definition above
{'RFC-1213': ['DisplayString'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['enterprises', 'IpAddress', 'TimeTicks', 'OBJECT-TYPE', 'mib-2', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-IDENTITY', 'Integer32', 'Counter32']}Related source files and packages:
Same file in Observium Community.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1918.2.13.10.60.10 | number-Of-Registered-Rectifiers | 0 | 0 | |
| 1.3.6.1.4.1.1918.2.13.10.60.13 | number-Of-Rectifiers-Failed | 0 | 0 | |
| 1.3.6.1.4.1.1918.2.13.10.60.17 | number-Of-Rectifiers-Comms-Lost | 0 | 0 | |
| 1.3.6.1.4.1.1918.2.13.10.60.20 | rectifier-Current | 0 | 0 | |
| 1.3.6.1.4.1.1918.2.13.10.60.23 | rectifier-Current-Limit | 0 | 0 | |
| 1.3.6.1.4.1.1918.2.13.10.60.29 | highest-Rectifier-Heatsink-Temperature | 0 | 0 | |
| 1.3.6.1.4.1.1918.2.13.10.60.30 | rectifier-Values-Table | 1 | 21 | |
| 1.3.6.1.4.1.1918.2.13.10.60.55 | rectifier-Shutdown-Mode | 0 | 0 | |
| 1.3.6.1.4.1.1918.2.13.10.60.60 | restart-All-Rectifiers | 0 | 0 | |
| 1.3.6.1.4.1.1918.2.13.10.60.70 | load-Based-Rectifier-Shutdown-Config | 4 | 4 | |
| 1.3.6.1.4.1.1918.2.13.10.60.80 | ramp-Up-Slope | 0 | 0 | |
| 1.3.6.1.4.1.1918.2.13.10.60.90 | ovsd-Set-Point | 0 | 0 | |
| 1.3.6.1.4.1.1918.2.13.10.60.110 | rectifier-Start-Up-Delay | 0 | 0 |