Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"adslAtucProprietaryPhysXCurrentFailures",
"OBJECT-TYPE",
"SYNTAX",
"BITS",
"{",
"reserved0",
"(",
"0",
")",
",",
"reserved1",
"(",
"1",
")",
",",
"reserved2",
"(",
"2",
")",
",",
"reserved3",
"(",
"3",
")",
",",
"noDetectionUS",
"(",
"4",
")",
",",
"communicationProblemUS",
"(",
"5",
")",
",",
"bitRateTooHighUS",
"(",
"6",
")",
",",
"noCommonModeInHandshakeUS",
"(",
"7",
")",
",",
"reserved8",
"(",
"8",
")",
",",
"reserved9",
"(",
"9",
")",
",",
"ptmCodingViolationsPreemptiveB1US",
"(",
"10",
")",
",",
"ptmCodingViolationsB1US",
"(",
"11",
")",
",",
"ptmOutOfSyncB1US",
"(",
"12",
")",
",",
"ptmCodingViolationsPreemptiveB0US",
"(",
"13",
")",
",",
"ptmCodingViolationsB0US",
"(",
"14",
")",
",",
"ptmOutOfSyncB0US",
"(",
"15",
")",
",",
"noCellDelineationFastUS",
"(",
"16",
")",
",",
"noCellDelineationInterleavedUS",
"(",
"17",
")",
",",
"lossOfFrameUS",
"(",
"18",
")",
",",
"lossOfSignalUS",
"(",
"19",
")",
",",
"reserved20",
"(",
"20",
")",
",",
"reserved21",
"(",
"21",
")",
",",
"reserved22",
"(",
"22",
")",
",",
"reserved23",
"(",
"23",
")",
",",
"lossOfCellDelineationFastPathUS",
"(",
"24",
")",
",",
"lossOfCellDelineationInterleavedPathUS",
"(",
"25",
")",
",",
"reserved26",
"(",
"26",
")",
",",
"reserved27",
"(",
"27",
")",
",",
"reserved28",
"(",
"28",
")",
",",
"notRunningShowTimeStateUS",
"(",
"29",
")",
",",
"unavailableTimeCountedUS",
"(",
"30",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Bit mask giving the set of current active failures on the upstream (bit set => failure is ON). A failure is declared when the corresponding defect is active for more than 2.5 (+/-0.5) sec. A failure is cleared when the corresponding defect is off for at least 10.5 (+/-0.5) sec. The bit index and corresponding failure are: Bit[30] - Set when unavailable time is counted Bit[29] - Set when the modem is not in the Running Showtime state Bit[25] - Loss of cell delineation - interleaved path Bit[24] - Loss of cell delineation - fast path Bit[19] - Loss of signal Bit[18] - Loss of frame Bit[17] - No cell delineation - interleaved Bit[16] - No cell delineation - fast Bit[15] - PTM TC Out-Of-Sync Violation for bearer channel B0 Bit[14] - PTM TC Coding Violation for bearer channel B0, non-preemptive Bit[13] - PTM TC Coding Violation for bearer channel B0, preemptive Bit[12] - PTM TC Out-Of-Sync Violation for bearer channel B1 Bit[11] - PTM TC Coding Violation for bearer channel B1, non-preemptive Bit[10] - PTM TC Coding Violation for bearer channel B1, preemptive Bit[07] - No common mode in Handshake. Set when the test configuration prevents the training in the only mode supported by the ATU-R Bit[06] - Bit rate is too high. Set when the line quality does allow support for the minimum bit rate configured Bit[05] - Communication problem. Sethwne initialisation could not be completed due to time-out or a CRC error in one of the message received from the ATU-R Bit[04] - No detection. Set when the ATU-R has not been detected after 2.5 seconds of attempts to activate the line. Note: The RunningShowtime state is left as soon as unavailable time is counted (10 consecutive severely errored seconds), so bits 1 and 2 are always set together.\"",
"::=",
"{",
"adslAtucProprietaryPhysXEntry",
"3",
"}"
],
"syntax_tree": [
[
"BITS",
[
[
"reserved0",
0
],
[
"reserved1",
1
],
[
"reserved2",
2
],
[
"reserved3",
3
],
[
"noDetectionUS",
4
],
[
"communicationProblemUS",
5
],
[
"bitRateTooHighUS",
6
],
[
"noCommonModeInHandshakeUS",
7
],
[
"reserved8",
8
],
[
"reserved9",
9
],
[
"ptmCodingViolationsPreemptiveB1US",
10
],
[
"ptmCodingViolationsB1US",
11
],
[
"ptmOutOfSyncB1US",
12
],
[
"ptmCodingViolationsPreemptiveB0US",
13
],
[
"ptmCodingViolationsB0US",
14
],
[
"ptmOutOfSyncB0US",
15
],
[
"noCellDelineationFastUS",
16
],
[
"noCellDelineationInterleavedUS",
17
],
[
"lossOfFrameUS",
18
],
[
"lossOfSignalUS",
19
],
[
"reserved20",
20
],
[
"reserved21",
21
],
[
"reserved22",
22
],
[
"reserved23",
23
],
[
"lossOfCellDelineationFastPathUS",
24
],
[
"lossOfCellDelineationInterleavedPathUS",
25
],
[
"reserved26",
26
],
[
"reserved27",
27
],
[
"reserved28",
28
],
[
"notRunningShowTimeStateUS",
29
],
[
"unavailableTimeCountedUS",
30
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Bit mask giving the set of current active failures on the upstream (bit set => failure is ON). A failure is declared when the corresponding defect is active for more than 2.5 (+/-0.5) sec. A failure is cleared when the corresponding defect is off for at least 10.5 (+/-0.5) sec. The bit index and corresponding failure are: Bit[30] - Set when unavailable time is counted Bit[29] - Set when the modem is not in the Running Showtime state Bit[25] - Loss of cell delineation - interleaved path Bit[24] - Loss of cell delineation - fast path Bit[19] - Loss of signal Bit[18] - Loss of frame Bit[17] - No cell delineation - interleaved Bit[16] - No cell delineation - fast Bit[15] - PTM TC Out-Of-Sync Violation for bearer channel B0 Bit[14] - PTM TC Coding Violation for bearer channel B0, non-preemptive Bit[13] - PTM TC Coding Violation for bearer channel B0, preemptive Bit[12] - PTM TC Out-Of-Sync Violation for bearer channel B1 Bit[11] - PTM TC Coding Violation for bearer channel B1, non-preemptive Bit[10] - PTM TC Coding Violation for bearer channel B1, preemptive Bit[07] - No common mode in Handshake. Set when the test configuration prevents the training in the only mode supported by the ATU-R Bit[06] - Bit rate is too high. Set when the line quality does allow support for the minimum bit rate configured Bit[05] - Communication problem. Sethwne initialisation could not be completed due to time-out or a CRC error in one of the message received from the ATU-R Bit[04] - No detection. Set when the ATU-R has not been detected after 2.5 seconds of attempts to activate the line. Note: The RunningShowtime state is left as soon as unavailable time is counted (10 consecutive severely errored seconds), so bits 1 and 2 are always set together."
],
null,
null,
null,
null
]
}