OID reference
1.3.6.1.4.1.2.3.51.2.4.9.3.7.3
Destination IP for MM to check its logical link. Specify a non-zero IP Address in order to enable logical uplink checking. NOTE: This MIB object is only applicable to systems with a standby MM.
Identification
{1 3 6 1 4 1 2 3 51 2 4 9 3 7 3}
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.2.3.51.2.4.9.3.7.3.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
logicalUplinkDestination OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination IP for MM to check its logical link.
Specify a non-zero IP Address in order to enable logical uplink checking.
NOTE: This MIB object is only applicable to systems with a standby MM."
::= { uplinkCheckConfig 3 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Destination IP for MM to check its logical link. Specify a non-zero IP Address in order to enable logical uplink checking. NOTE: This MIB object is only applicable to systems with a standby MM.
IBM MIB copies (LibreNMS/Observium Community)IBM MIB copies (MibBrowser.online)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: mandatory.
Names: logicalUplinkDestination
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"logicalUplinkDestination",
"OBJECT-TYPE",
"SYNTAX",
"IpAddress",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"Destination IP for MM to check its logical link. Specify a non-zero IP Address in order to enable logical uplink checking. NOTE: This MIB object is only applicable to systems with a standby MM.\"",
"::=",
"{",
"uplinkCheckConfig",
"3",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"IpAddress",
null
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"Destination IP for MM to check its logical link. Specify a non-zero IP Address in order to enable logical uplink checking. NOTE: This MIB object is only applicable to systems with a standby MM."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive. IBM support.
Module: BLADE-MIB
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises', 'IpAddress']}Related source files and packages:
Same file in Observium Community.
Vendor MIB copy from the LibreNMS archive. IBM support.
Module: CME-MIB
{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises', 'IpAddress']}Same file in Observium Community.
Vendor MIB copy from the MibBrowser.online archive. IBM (https://w3.ibm.com/standards ) support.
Module: CME-MIB
{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises', 'IpAddress']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.4.9.3.7.1 | uplinkCheckEnabled | 0 | 0 | Disable or enable network uplink checking. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.7.2 | uplinkCheckDelay | 0 | 0 | Delay, in minutes, between discovery of a failed network uplink and the subsequent MM failover. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.7.4 | logicalUplinkCheckEnabled | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.7.5 | logicalUplinkCheckDelay | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.7.6 | physicalUplinkCheckDelayInSecs | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.7.7 | logicalUplinkCheckDelayInSecs | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.7.8 | logicalUplinkIPv6Destination | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.7.9 | logicalUplinkFailoverPolicy | 0 | 0 |