OID reference
1.3.6.1.4.1.2.3.51.2.4.9.3.7.8
Destination IP for MM to check its logical link using IPv6. Specify a non-zero IP Address in order to enable logical uplink checking. NOTE: This MIB object is only applicable to systems with a standby MM.
Identification
{1 3 6 1 4 1 2 3 51 2 4 9 3 7 8}
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
logicalUplinkIPv6Destination OBJECT-TYPE
SYNTAX InetAddressIPv6
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination IP for MM to check its logical link using IPv6.
Specify a non-zero IP Address in order to enable logical uplink checking.
NOTE: This MIB object is only applicable to systems with a standby MM."
::= { uplinkCheckConfig 8 }logicalUplinkIPv6Destination OBJECT-TYPE
SYNTAX InetAddressIPv6
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination IP for MM to check its logical link using IPv6.
Specify a non-zero IP Address in order to enable logical uplink checking.
NOTE: This MIB object is only applicable to systems with a standby MM.
NOTE: This MIB object is only applicable if IPv6 is enabled on the MM."
::= { uplinkCheckConfig 8 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Destination IP for MM to check its logical link using IPv6. Specify a non-zero IP Address in order to enable logical uplink checking. NOTE: This MIB object is only applicable to systems with a standby MM.
IBM MIB copies (LibreNMS/Observium Community)IBM MIB copies (MibBrowser.online)
Description 2
Destination IP for MM to check its logical link using IPv6. Specify a non-zero IP Address in order to enable logical uplink checking. NOTE: This MIB object is only applicable to systems with a standby MM. NOTE: This MIB object is only applicable if IPv6 is enabled on the MM.
IBM MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: mandatory.
Names: logicalUplinkIPv6Destination
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"logicalUplinkIPv6Destination",
"OBJECT-TYPE",
"SYNTAX",
"InetAddressIPv6",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"Destination IP for MM to check its logical link using IPv6. Specify a non-zero IP Address in order to enable logical uplink checking. NOTE: This MIB object is only applicable to systems with a standby MM.\"",
"::=",
"{",
"uplinkCheckConfig",
"8",
"}"
],
"syntax_tree": [
[
"row",
"InetAddressIPv6"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"Destination IP for MM to check its logical link using IPv6. Specify a non-zero IP Address in order to enable logical uplink checking. NOTE: This MIB object is only applicable to systems with a standby MM."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive. IBM support.
Module: CME-MIB
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises', 'IpAddress']}Related source files and packages:
Same file in Observium Community.
Vendor MIB copy from the MibBrowser.online archive. IBM (https://w3.ibm.com/standards ) support.
Module: CME-MIB
{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises', 'IpAddress']}Related source files and packages:
Status in source: mandatory.
Names: logicalUplinkIPv6Destination
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"logicalUplinkIPv6Destination",
"OBJECT-TYPE",
"SYNTAX",
"InetAddressIPv6",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"Destination IP for MM to check its logical link using IPv6. Specify a non-zero IP Address in order to enable logical uplink checking. NOTE: This MIB object is only applicable to systems with a standby MM. NOTE: This MIB object is only applicable if IPv6 is enabled on the MM.\"",
"::=",
"{",
"uplinkCheckConfig",
"8",
"}"
],
"syntax_tree": [
[
"row",
"InetAddressIPv6"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"Destination IP for MM to check its logical link using IPv6. Specify a non-zero IP Address in order to enable logical uplink checking. NOTE: This MIB object is only applicable to systems with a standby MM. NOTE: This MIB object is only applicable if IPv6 is enabled on the MM."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive. IBM support.
Module: BLADE-MIB
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises', 'IpAddress']}Same file in Observium Community.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.4.9.3.7.1 | uplinkCheckEnabled | 0 | 0 | Disable or enable network uplink checking. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.7.2 | uplinkCheckDelay | 0 | 0 | Delay, in minutes, between discovery of a failed network uplink and the subsequent MM failover. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.7.3 | logicalUplinkDestination | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.7.4 | logicalUplinkCheckEnabled | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.7.5 | logicalUplinkCheckDelay | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.7.6 | physicalUplinkCheckDelayInSecs | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.7.7 | logicalUplinkCheckDelayInSecs | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.7.9 | logicalUplinkFailoverPolicy | 0 | 0 |