OID reference

h3cDot3OamLoopbackCommand

1.3.6.1.4.1.2011.10.2.42.3.1.3.1.1

Description

This attribute initiates or terminates remote loopback with an OAM peer. Writing startRemoteLoopback(2) to this attribute cause the local OAM client to send a loopback OAMPDU to the OAM peer with the loopback enable flags set. Writing stopRemoteLoopback(3) to this attribute will cause the local OAM client to send a lo…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.2011.10.2.42.3.1.3.1 (h3cDot3OamLoopbackEntry)
Node code
1
Node name
h3cDot3OamLoopbackCommand
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.2011.10.2.42.3.1.3.1.1
URN notation
urn:oid:1.3.6.1.4.1.2011.10.2.42.3.1.3.1.1
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 2011 10 2 42 3 1 3 1 1}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) huawei(2011) h3c(10) h3cCommon(2) h3cEpon(42) h3cEfmOamMIB(3) h3cDot3OamMIB(1) h3cDot3OamLoopbackTable(3) h3cDot3OamLoopbackEntry(1) h3cDot3OamLoopbackCommand(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) iMAP(2011) h3c(10) h3cCommon(2) h3cEpon(42) h3cEfmOamMIB(3) h3cDot3OamMIB(1) h3cDot3OamLoopbackTable(3) h3cDot3OamLoopbackEntry(1) h3cDot3OamLoopbackCommand(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) huawei(2011) h3c(10) h3cCommon(2) h3cEpon(42) h3cEfmOamMIB(3) h3cDot3OamMIB(1) h3cDot3OamLoopbackTable(3) h3cDot3OamLoopbackEntry(1) h3cDot3OamLoopbackCommand(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) iMAP(2011) h3c(10) h3cCommon(2) h3cEpon(42) h3cEfmOamMIB(3) h3cDot3OamMIB(1) h3cDot3OamLoopbackTable(3) h3cDot3OamLoopbackEntry(1) h3cDot3OamLoopbackCommand(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) huawei(2011) h3c(10) h3cCommon(2) h3cEpon(42) h3cEfmOamMIB(3) h3cDot3OamMIB(1) h3cDot3OamLoopbackTable(3) h3cDot3OamLoopbackEntry(1) h3cDot3OamLoopbackCommand(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) iMAP(2011) h3c(10) h3cCommon(2) h3cEpon(42) h3cEfmOamMIB(3) h3cDot3OamMIB(1) h3cDot3OamLoopbackTable(3) h3cDot3OamLoopbackEntry(1) h3cDot3OamLoopbackCommand(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) huawei(2011) h3c(10) h3cCommon(2) h3cEpon(42) h3cEfmOamMIB(3) h3cDot3OamMIB(1) h3cDot3OamLoopbackTable(3) h3cDot3OamLoopbackEntry(1) h3cDot3OamLoopbackCommand(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) iMAP(2011) h3c(10) h3cCommon(2) h3cEpon(42) h3cEfmOamMIB(3) h3cDot3OamMIB(1) h3cDot3OamLoopbackTable(3) h3cDot3OamLoopbackEntry(1) h3cDot3OamLoopbackCommand(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) huawei(2011) h3c(10) h3cCommon(2) h3cEpon(42) h3cEfmOamMIB(3) h3cDot3OamMIB(1) h3cDot3OamLoopbackTable(3) h3cDot3OamLoopbackEntry(1) h3cDot3OamLoopbackCommand(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) iMAP(2011) h3c(10) h3cCommon(2) h3cEpon(42) h3cEfmOamMIB(3) h3cDot3OamMIB(1) h3cDot3OamLoopbackTable(3) h3cDot3OamLoopbackEntry(1) h3cDot3OamLoopbackCommand(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) huawei(2011) h3c(10) h3cCommon(2) h3cEpon(42) h3cEfmOamMIB(3) h3cDot3OamMIB(1) h3cDot3OamLoopbackTable(3) h3cDot3OamLoopbackEntry(1) h3cDot3OamLoopbackCommand(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) iMAP(2011) h3c(10) h3cCommon(2) h3cEpon(42) h3cEfmOamMIB(3) h3cDot3OamMIB(1) h3cDot3OamLoopbackTable(3) h3cDot3OamLoopbackEntry(1) h3cDot3OamLoopbackCommand(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) huawei(2011) h3c(10) h3cCommon(2) h3cEpon(42) h3cEfmOamMIB(3) h3cDot3OamMIB(1) h3cDot3OamLoopbackTable(3) h3cDot3OamLoopbackEntry(1) h3cDot3OamLoopbackCommand(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) iMAP(2011) h3c(10) h3cCommon(2) h3cEpon(42) h3cEfmOamMIB(3) h3cDot3OamMIB(1) h3cDot3OamLoopbackTable(3) h3cDot3OamLoopbackEntry(1) h3cDot3OamLoopbackCommand(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) huawei(2011) h3c(10) h3cCommon(2) h3cEpon(42) h3cEfmOamMIB(3) h3cDot3OamMIB(1) h3cDot3OamLoopbackTable(3) h3cDot3OamLoopbackEntry(1) h3cDot3OamLoopbackCommand(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) iMAP(2011) h3c(10) h3cCommon(2) h3cEpon(42) h3cEfmOamMIB(3) h3cDot3OamMIB(1) h3cDot3OamLoopbackTable(3) h3cDot3OamLoopbackEntry(1) h3cDot3OamLoopbackCommand(1)}
  • Additional combinations skipped.
OID-IRI notation
  • /1/3/6/1/4/1/2011/10/2/42/3/1/3/1/1
  • /ISO/Identified-Organization/6/1/4/1/2011/10/2/42/3/1/3/1/1
  • /ISO/3/6/1/4/1/2011/10/2/42/3/1/3/1/1
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/huawei/h3c/h3cCommon/h3cEpon/h3cEfmOamMIB/h3cDot3OamMIB/h3cDot3OamLoopbackTable/h3cDot3OamLoopbackEntry/h3cDot3OamLoopbackCommand
  • /iso/identified-organization/dod/internet/private/enterprise/iMAP/h3c/h3cCommon/h3cEpon/h3cEfmOamMIB/h3cDot3OamMIB/h3cDot3OamLoopbackTable/h3cDot3OamLoopbackEntry/h3cDot3OamLoopbackCommand
  • /iso/identified-organization/dod/internet/private/enterprises/huawei/h3c/h3cCommon/h3cEpon/h3cEfmOamMIB/h3cDot3OamMIB/h3cDot3OamLoopbackTable/h3cDot3OamLoopbackEntry/h3cDot3OamLoopbackCommand
  • /iso/identified-organization/dod/internet/private/enterprises/iMAP/h3c/h3cCommon/h3cEpon/h3cEfmOamMIB/h3cDot3OamMIB/h3cDot3OamLoopbackTable/h3cDot3OamLoopbackEntry/h3cDot3OamLoopbackCommand
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/huawei/h3c/h3cCommon/h3cEpon/h3cEfmOamMIB/h3cDot3OamMIB/h3cDot3OamLoopbackTable/h3cDot3OamLoopbackEntry/h3cDot3OamLoopbackCommand
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/iMAP/h3c/h3cCommon/h3cEpon/h3cEfmOamMIB/h3cDot3OamMIB/h3cDot3OamLoopbackTable/h3cDot3OamLoopbackEntry/h3cDot3OamLoopbackCommand
  • /iso/identified-organization/dod/internet/private/vendor-objects/huawei/h3c/h3cCommon/h3cEpon/h3cEfmOamMIB/h3cDot3OamMIB/h3cDot3OamLoopbackTable/h3cDot3OamLoopbackEntry/h3cDot3OamLoopbackCommand
  • /iso/identified-organization/dod/internet/private/vendor-objects/iMAP/h3c/h3cCommon/h3cEpon/h3cEfmOamMIB/h3cDot3OamMIB/h3cDot3OamLoopbackTable/h3cDot3OamLoopbackEntry/h3cDot3OamLoopbackCommand
  • /iso/org/dod/internet/private/enterprise/huawei/h3c/h3cCommon/h3cEpon/h3cEfmOamMIB/h3cDot3OamMIB/h3cDot3OamLoopbackTable/h3cDot3OamLoopbackEntry/h3cDot3OamLoopbackCommand
  • /iso/org/dod/internet/private/enterprise/iMAP/h3c/h3cCommon/h3cEpon/h3cEfmOamMIB/h3cDot3OamMIB/h3cDot3OamLoopbackTable/h3cDot3OamLoopbackEntry/h3cDot3OamLoopbackCommand
  • /iso/org/dod/internet/private/enterprises/huawei/h3c/h3cCommon/h3cEpon/h3cEfmOamMIB/h3cDot3OamMIB/h3cDot3OamLoopbackTable/h3cDot3OamLoopbackEntry/h3cDot3OamLoopbackCommand
  • /iso/org/dod/internet/private/enterprises/iMAP/h3c/h3cCommon/h3cEpon/h3cEfmOamMIB/h3cDot3OamMIB/h3cDot3OamLoopbackTable/h3cDot3OamLoopbackEntry/h3cDot3OamLoopbackCommand
  • /iso/org/dod/internet/private/ldap-enterprise/huawei/h3c/h3cCommon/h3cEpon/h3cEfmOamMIB/h3cDot3OamMIB/h3cDot3OamLoopbackTable/h3cDot3OamLoopbackEntry/h3cDot3OamLoopbackCommand
  • /iso/org/dod/internet/private/ldap-enterprise/iMAP/h3c/h3cCommon/h3cEpon/h3cEfmOamMIB/h3cDot3OamMIB/h3cDot3OamLoopbackTable/h3cDot3OamLoopbackEntry/h3cDot3OamLoopbackCommand
  • /iso/org/dod/internet/private/vendor-objects/huawei/h3c/h3cCommon/h3cEpon/h3cEfmOamMIB/h3cDot3OamMIB/h3cDot3OamLoopbackTable/h3cDot3OamLoopbackEntry/h3cDot3OamLoopbackCommand
  • /iso/org/dod/internet/private/vendor-objects/iMAP/h3c/h3cCommon/h3cEpon/h3cEfmOamMIB/h3cDot3OamMIB/h3cDot3OamLoopbackTable/h3cDot3OamLoopbackEntry/h3cDot3OamLoopbackCommand
  • Additional combinations skipped.

SNMP properties

Value type
INTEGER
Maximum access defined by MIB
read-write
Status in MIB
current

Enumerated values

ValueName
1noLoopback
2startRemoteLoopback
3stopRemoteLoopback

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.

Published row index: ifIndex.

snmpwalk [connection options] DEVICE .1.3.6.1.4.1.2011.10.2.42.3.1.3.1.1

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Available source records contain 2 distinct definitions; some records may not include a definition.

Show 2 published definitions

h3cDot3OamLoopbackCommand · current

h3cDot3OamLoopbackCommand OBJECT-TYPE
        SYNTAX      INTEGER {
                      noLoopback (1),
                      startRemoteLoopback (2),
                      stopRemoteLoopback (3)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
          "This attribute initiates or terminates remote loopback with
          an OAM peer.  Writing startRemoteLoopback(2) to this attribute
          cause the local OAM client to send a loopback OAMPDU to the
          OAM peer with the loopback enable flags set.  Writing
          stopRemoteLoopback(3) to this attribute will cause the local
          OAM client to send a loopback OAMPDU to the OAM peer with the
          loopback enable flags cleared.  Writing noLoopback to this
          attribute has no effect.

          Writes to this attribute are ignored unless the OAM status of
          this interface is 'operational' (h3cDot3OamOperStatus).

          The attribute always returns noLoopback on a read.  To
          determine the loopback status, use the attribute
          h3cDot3OamLoopbackStatus.  "
        REFERENCE   "[802.3ah], 57.2.11"
        ::= { h3cDot3OamLoopbackEntry 1 }

h3cDot3OamLoopbackCommand · current

h3cDot3OamLoopbackCommand OBJECT-TYPE
        SYNTAX      INTEGER {
                      noLoopback (1),
                      startRemoteLoopback (2),
                      stopRemoteLoopback (3)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
          "This attribute initiates or terminates remote loopback with
          an OAM peer.  Writing startRemoteLoopback(2) to this attribute
          cause the local OAM client to send a loopback OAMPDU to the
          OAM peer with the loopback enable flags set.  Writing
          stopRemoteLoopback(3) to this attribute will cause the local
          OAM client to send a loopback OAMPDU to the OAM peer with the
          loopback enable flags cleared.  Writing noLoopback to this
          attribute has no effect.

          Writes to this attribute are ignored unless the OAM status of
          this interface is 'operational' (h3cDot3OamOperStatus).

          The attribute always returns noLoopback on a read.  To
          determine the loopback status, use the attribute
          h3cDot3OamLoopbackStatus."
        REFERENCE   "[802.3ah], 57.2.11"
        ::= { h3cDot3OamLoopbackEntry 1 }

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

This attribute initiates or terminates remote loopback with an OAM peer. Writing startRemoteLoopback(2) to this attribute cause the local OAM client to send a loopback OAMPDU to the OAM peer with the loopback enable flags set. Writing stopRemoteLoopback(3) to this attribute will cause the local OAM client to send a loopback OAMPDU to the OAM peer with the loopback enable flags cleared. Writing noLoopback to this attribute has no effect. Writes to this attribute are ignored unless the OAM status of this interface is 'operational' (h3cDot3OamOperStatus). The attribute always returns noLoopback on a read. To determine the loopback status, use the attribute h3cDot3OamLoopbackStatus.

Sources for this description

H3C and HH3C MIB copies (Observium Community)Netdisco MIB archive copies

See 2 matching source records

Evidence

Source records

2 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1H3C and HH3C MIB copies (Observium Community), Netdisco MIB archive copies2 records · 2 sources

Description 1

h3cDot3OamLoopbackCommand · currentNetdisco MIB archive copies1 source

Status in source: current.

Names: h3cDot3OamLoopbackCommand

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "h3cDot3OamLoopbackCommand",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "noLoopback",
    "(",
    "1",
    ")",
    ",",
    "startRemoteLoopback",
    "(",
    "2",
    ")",
    ",",
    "stopRemoteLoopback",
    "(",
    "3",
    ")",
    "}",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"This attribute initiates or terminates remote loopback with an OAM peer. Writing startRemoteLoopback(2) to this attribute cause the local OAM client to send a loopback OAMPDU to the OAM peer with the loopback enable flags set. Writing stopRemoteLoopback(3) to this attribute will cause the local OAM client to send a loopback OAMPDU to the OAM peer with the loopback enable flags cleared. Writing noLoopback to this attribute has no effect. Writes to this attribute are ignored unless the OAM status of this interface is 'operational' (h3cDot3OamOperStatus). The attribute always returns noLoopback on a read. To determine the loopback status, use the attribute h3cDot3OamLoopbackStatus. \"",
    "REFERENCE",
    "\"[802.3ah], 57.2.11\"",
    "::=",
    "{",
    "h3cDot3OamLoopbackEntry",
    "1",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "noLoopback",
            1
          ],
          [
            "startRemoteLoopback",
            2
          ],
          [
            "stopRemoteLoopback",
            3
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This attribute initiates or terminates remote loopback with an OAM peer. Writing startRemoteLoopback(2) to this attribute cause the local OAM client to send a loopback OAMPDU to the OAM peer with the loopback enable flags set. Writing stopRemoteLoopback(3) to this attribute will cause the local OAM client to send a loopback OAMPDU to the OAM peer with the loopback enable flags cleared. Writing noLoopback to this attribute has no effect. Writes to this attribute are ignored unless the OAM status of this interface is 'operational' (h3cDot3OamOperStatus). The attribute always returns noLoopback on a read. To determine the loopback status, use the attribute h3cDot3OamLoopbackStatus."
    ],
    [
      "REFERENCE",
      "[802.3ah], 57.2.11"
    ],
    null,
    null,
    null
  ]
}
h3cDot3OamLoopbackCommand · currentH3C and HH3C MIB copies (Observium Community)1 source

Status in source: current.

Names: h3cDot3OamLoopbackCommand

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "h3cDot3OamLoopbackCommand",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "noLoopback",
    "(",
    "1",
    ")",
    ",",
    "startRemoteLoopback",
    "(",
    "2",
    ")",
    ",",
    "stopRemoteLoopback",
    "(",
    "3",
    ")",
    "}",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"This attribute initiates or terminates remote loopback with an OAM peer. Writing startRemoteLoopback(2) to this attribute cause the local OAM client to send a loopback OAMPDU to the OAM peer with the loopback enable flags set. Writing stopRemoteLoopback(3) to this attribute will cause the local OAM client to send a loopback OAMPDU to the OAM peer with the loopback enable flags cleared. Writing noLoopback to this attribute has no effect. Writes to this attribute are ignored unless the OAM status of this interface is 'operational' (h3cDot3OamOperStatus). The attribute always returns noLoopback on a read. To determine the loopback status, use the attribute h3cDot3OamLoopbackStatus.\"",
    "REFERENCE",
    "\"[802.3ah], 57.2.11\"",
    "::=",
    "{",
    "h3cDot3OamLoopbackEntry",
    "1",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "noLoopback",
            1
          ],
          [
            "startRemoteLoopback",
            2
          ],
          [
            "stopRemoteLoopback",
            3
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This attribute initiates or terminates remote loopback with an OAM peer. Writing startRemoteLoopback(2) to this attribute cause the local OAM client to send a loopback OAMPDU to the OAM peer with the loopback enable flags set. Writing stopRemoteLoopback(3) to this attribute will cause the local OAM client to send a loopback OAMPDU to the OAM peer with the loopback enable flags cleared. Writing noLoopback to this attribute has no effect. Writes to this attribute are ignored unless the OAM status of this interface is 'operational' (h3cDot3OamOperStatus). The attribute always returns noLoopback on a read. To determine the loopback status, use the attribute h3cDot3OamLoopbackStatus."
    ],
    [
      "REFERENCE",
      "[802.3ah], 57.2.11"
    ],
    null,
    null,
    null
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.2011)

Lwu Zhao

Siblings (2)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.2011.10.2.42.3.1.3.1.2 h3cDot3OamLoopbackStatus00
1.3.6.1.4.1.2011.10.2.42.3.1.3.1.3 h3cDot3OamLoopbackIgnoreRx00