OID reference

hwadsl2LineStatusLastRetrainInfo

1.3.6.1.4.1.2011.6.138.1.1.1.1.8

Description

Indicates the last retrained information performed on the line. Options: 1. none(1) - No record is available 2. cpe-l3-trigger(2) - The terminal initiates a low power consumption L3 request 3. lom-us-trigger-dra(3) - The upstream noise margin is smaller than the minimum noise margin in rate dynamic adjustment 4. lom-d…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.2011.6.138.1.1.1.1 (hwadsl2LineEntry)
Node code
8
Node name
hwadsl2LineStatusLastRetrainInfo
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.2011.6.138.1.1.1.1.8
URN notation
urn:oid:1.3.6.1.4.1.2011.6.138.1.1.1.1.8
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 2011 6 138 1 1 1 1 8}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) huawei(2011) huaweiUtility(6) hwadsl2MIB(138) hwadsl2(1) hwadsl2Line(1) hwadsl2LineTable(1) hwadsl2LineEntry(1) hwadsl2LineStatusLastRetrainInfo(8)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) iMAP(2011) huaweiUtility(6) hwadsl2MIB(138) hwadsl2(1) hwadsl2Line(1) hwadsl2LineTable(1) hwadsl2LineEntry(1) hwadsl2LineStatusLastRetrainInfo(8)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) huawei(2011) huaweiUtility(6) hwadsl2MIB(138) hwadsl2(1) hwadsl2Line(1) hwadsl2LineTable(1) hwadsl2LineEntry(1) hwadsl2LineStatusLastRetrainInfo(8)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) iMAP(2011) huaweiUtility(6) hwadsl2MIB(138) hwadsl2(1) hwadsl2Line(1) hwadsl2LineTable(1) hwadsl2LineEntry(1) hwadsl2LineStatusLastRetrainInfo(8)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) huawei(2011) huaweiUtility(6) hwadsl2MIB(138) hwadsl2(1) hwadsl2Line(1) hwadsl2LineTable(1) hwadsl2LineEntry(1) hwadsl2LineStatusLastRetrainInfo(8)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) iMAP(2011) huaweiUtility(6) hwadsl2MIB(138) hwadsl2(1) hwadsl2Line(1) hwadsl2LineTable(1) hwadsl2LineEntry(1) hwadsl2LineStatusLastRetrainInfo(8)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) huawei(2011) huaweiUtility(6) hwadsl2MIB(138) hwadsl2(1) hwadsl2Line(1) hwadsl2LineTable(1) hwadsl2LineEntry(1) hwadsl2LineStatusLastRetrainInfo(8)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) iMAP(2011) huaweiUtility(6) hwadsl2MIB(138) hwadsl2(1) hwadsl2Line(1) hwadsl2LineTable(1) hwadsl2LineEntry(1) hwadsl2LineStatusLastRetrainInfo(8)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) huawei(2011) huaweiUtility(6) hwadsl2MIB(138) hwadsl2(1) hwadsl2Line(1) hwadsl2LineTable(1) hwadsl2LineEntry(1) hwadsl2LineStatusLastRetrainInfo(8)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) iMAP(2011) huaweiUtility(6) hwadsl2MIB(138) hwadsl2(1) hwadsl2Line(1) hwadsl2LineTable(1) hwadsl2LineEntry(1) hwadsl2LineStatusLastRetrainInfo(8)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) huawei(2011) huaweiUtility(6) hwadsl2MIB(138) hwadsl2(1) hwadsl2Line(1) hwadsl2LineTable(1) hwadsl2LineEntry(1) hwadsl2LineStatusLastRetrainInfo(8)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) iMAP(2011) huaweiUtility(6) hwadsl2MIB(138) hwadsl2(1) hwadsl2Line(1) hwadsl2LineTable(1) hwadsl2LineEntry(1) hwadsl2LineStatusLastRetrainInfo(8)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) huawei(2011) huaweiUtility(6) hwadsl2MIB(138) hwadsl2(1) hwadsl2Line(1) hwadsl2LineTable(1) hwadsl2LineEntry(1) hwadsl2LineStatusLastRetrainInfo(8)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) iMAP(2011) huaweiUtility(6) hwadsl2MIB(138) hwadsl2(1) hwadsl2Line(1) hwadsl2LineTable(1) hwadsl2LineEntry(1) hwadsl2LineStatusLastRetrainInfo(8)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) huawei(2011) huaweiUtility(6) hwadsl2MIB(138) hwadsl2(1) hwadsl2Line(1) hwadsl2LineTable(1) hwadsl2LineEntry(1) hwadsl2LineStatusLastRetrainInfo(8)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) iMAP(2011) huaweiUtility(6) hwadsl2MIB(138) hwadsl2(1) hwadsl2Line(1) hwadsl2LineTable(1) hwadsl2LineEntry(1) hwadsl2LineStatusLastRetrainInfo(8)}
  • Additional combinations skipped.
OID-IRI notation
  • /1/3/6/1/4/1/2011/6/138/1/1/1/1/8
  • /ISO/Identified-Organization/6/1/4/1/2011/6/138/1/1/1/1/8
  • /ISO/3/6/1/4/1/2011/6/138/1/1/1/1/8
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/huawei/huaweiUtility/hwadsl2MIB/hwadsl2/hwadsl2Line/hwadsl2LineTable/hwadsl2LineEntry/hwadsl2LineStatusLastRetrainInfo
  • /iso/identified-organization/dod/internet/private/enterprise/iMAP/huaweiUtility/hwadsl2MIB/hwadsl2/hwadsl2Line/hwadsl2LineTable/hwadsl2LineEntry/hwadsl2LineStatusLastRetrainInfo
  • /iso/identified-organization/dod/internet/private/enterprises/huawei/huaweiUtility/hwadsl2MIB/hwadsl2/hwadsl2Line/hwadsl2LineTable/hwadsl2LineEntry/hwadsl2LineStatusLastRetrainInfo
  • /iso/identified-organization/dod/internet/private/enterprises/iMAP/huaweiUtility/hwadsl2MIB/hwadsl2/hwadsl2Line/hwadsl2LineTable/hwadsl2LineEntry/hwadsl2LineStatusLastRetrainInfo
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/huawei/huaweiUtility/hwadsl2MIB/hwadsl2/hwadsl2Line/hwadsl2LineTable/hwadsl2LineEntry/hwadsl2LineStatusLastRetrainInfo
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/iMAP/huaweiUtility/hwadsl2MIB/hwadsl2/hwadsl2Line/hwadsl2LineTable/hwadsl2LineEntry/hwadsl2LineStatusLastRetrainInfo
  • /iso/identified-organization/dod/internet/private/vendor-objects/huawei/huaweiUtility/hwadsl2MIB/hwadsl2/hwadsl2Line/hwadsl2LineTable/hwadsl2LineEntry/hwadsl2LineStatusLastRetrainInfo
  • /iso/identified-organization/dod/internet/private/vendor-objects/iMAP/huaweiUtility/hwadsl2MIB/hwadsl2/hwadsl2Line/hwadsl2LineTable/hwadsl2LineEntry/hwadsl2LineStatusLastRetrainInfo
  • /iso/org/dod/internet/private/enterprise/huawei/huaweiUtility/hwadsl2MIB/hwadsl2/hwadsl2Line/hwadsl2LineTable/hwadsl2LineEntry/hwadsl2LineStatusLastRetrainInfo
  • /iso/org/dod/internet/private/enterprise/iMAP/huaweiUtility/hwadsl2MIB/hwadsl2/hwadsl2Line/hwadsl2LineTable/hwadsl2LineEntry/hwadsl2LineStatusLastRetrainInfo
  • /iso/org/dod/internet/private/enterprises/huawei/huaweiUtility/hwadsl2MIB/hwadsl2/hwadsl2Line/hwadsl2LineTable/hwadsl2LineEntry/hwadsl2LineStatusLastRetrainInfo
  • /iso/org/dod/internet/private/enterprises/iMAP/huaweiUtility/hwadsl2MIB/hwadsl2/hwadsl2Line/hwadsl2LineTable/hwadsl2LineEntry/hwadsl2LineStatusLastRetrainInfo
  • /iso/org/dod/internet/private/ldap-enterprise/huawei/huaweiUtility/hwadsl2MIB/hwadsl2/hwadsl2Line/hwadsl2LineTable/hwadsl2LineEntry/hwadsl2LineStatusLastRetrainInfo
  • /iso/org/dod/internet/private/ldap-enterprise/iMAP/huaweiUtility/hwadsl2MIB/hwadsl2/hwadsl2Line/hwadsl2LineTable/hwadsl2LineEntry/hwadsl2LineStatusLastRetrainInfo
  • /iso/org/dod/internet/private/vendor-objects/huawei/huaweiUtility/hwadsl2MIB/hwadsl2/hwadsl2Line/hwadsl2LineTable/hwadsl2LineEntry/hwadsl2LineStatusLastRetrainInfo
  • /iso/org/dod/internet/private/vendor-objects/iMAP/huaweiUtility/hwadsl2MIB/hwadsl2/hwadsl2Line/hwadsl2LineTable/hwadsl2LineEntry/hwadsl2LineStatusLastRetrainInfo
  • Additional combinations skipped.

SNMP properties

Value type
INTEGER
Maximum access defined by MIB
read-only
Status in MIB
current

Enumerated values

ValueName
1none
2cpe-l3-trigger
3lom-us-trigger-dra
4lom-ds-trigger-dra
5cpe-never-answer-oam
6cpe-no-more-answer-oam
7persistent-ncd-us
8persistent-ncd-ds
9persistent-lcd-us
10persistent-lcd-ds
11l2-problem-co-drop
12l2-problem-cpe-drop
13bitswap-refused-us-co-drop
14bitswap-refused-us-cpe-drop
15channel-change-us-co-drop
16channel-change-us-cpe-drop
17noise-increase-us-co-drop
18noise-increase-us-cpe-drop
19bitswap-refused-ds-co-drop
20bitswap-refused-ds-cpe-drop
21channel-change-ds-co-drop
22channel-change-ds-cpe-drop
23noise-increase-ds-co-drop
24noise-increase-ds-cpe-drop
25lom-us-co-drop
26lom-us-cpe-drop
27lom-ds-co-drop
28lom-ds-cpe-drop
29sra-problem-us-co-drop
30sra-problem-us-cpe-drop
31sra-failed-us-co-drop
32sra-failed-us-cpe-drop
33sra-problem-ds-co-drop
34sra-problem-ds-cpe-drop
35sra-rejected-ds-co-drop
36sra-rejected-ds-cpe-drop
37bitswap-problem-us-co-drop
38bitswap-problem-us-cpe-drop
39bitswap-failed-us-co-drop
40bitswap-failed-us-cpe-drop
41bitswap-problem-ds-co-drop
42bitswap-problem-ds-cpe-drop
43bitswap-rejected-ds-co-drop
44bitswap-rejected-ds-cpe-drop
45cpe-switched-off
46cpe-lost
47co-reset
48co-stop
49unknown

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.

Published row index: ifIndex.

snmpwalk [connection options] DEVICE .1.3.6.1.4.1.2011.6.138.1.1.1.1.8

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

The displayed source records contain one distinct definition. Compare its source records.

hwadsl2LineStatusLastRetrainInfo  OBJECT-TYPE               
           SYNTAX INTEGER 
                     {
                      none(1),
                      cpe-l3-trigger(2),
                      lom-us-trigger-dra(3),
                      lom-ds-trigger-dra(4),
                      cpe-never-answer-oam(5),
                      cpe-no-more-answer-oam(6),
                      persistent-ncd-us(7),
                      persistent-ncd-ds(8),
                      persistent-lcd-us(9),
                      persistent-lcd-ds(10),
                      l2-problem-co-drop(11),
                      l2-problem-cpe-drop(12),
                      bitswap-refused-us-co-drop(13),
                      bitswap-refused-us-cpe-drop(14),
                      channel-change-us-co-drop(15),
                      channel-change-us-cpe-drop(16),
                      noise-increase-us-co-drop(17),
                      noise-increase-us-cpe-drop(18),
                      bitswap-refused-ds-co-drop(19),
                      bitswap-refused-ds-cpe-drop(20),
                      channel-change-ds-co-drop(21),
                      channel-change-ds-cpe-drop(22),
                      noise-increase-ds-co-drop(23),
                      noise-increase-ds-cpe-drop(24),
                      lom-us-co-drop(25),
                      lom-us-cpe-drop(26),
                      lom-ds-co-drop(27),
                      lom-ds-cpe-drop(28),
                      sra-problem-us-co-drop(29),
                      sra-problem-us-cpe-drop(30),
                      sra-failed-us-co-drop(31),
                      sra-failed-us-cpe-drop(32),
                      sra-problem-ds-co-drop(33),
                      sra-problem-ds-cpe-drop(34),
                      sra-rejected-ds-co-drop(35),
                      sra-rejected-ds-cpe-drop(36),
                      bitswap-problem-us-co-drop(37),
                      bitswap-problem-us-cpe-drop(38),
                      bitswap-failed-us-co-drop(39),
                      bitswap-failed-us-cpe-drop(40),
                      bitswap-problem-ds-co-drop(41),
                      bitswap-problem-ds-cpe-drop(42),
                      bitswap-rejected-ds-co-drop(43),
                      bitswap-rejected-ds-cpe-drop(44),
                      cpe-switched-off(45),
                      cpe-lost(46),
                      co-reset(47),
                      co-stop(48),
                      unknown(49)
                     }                      
           MAX-ACCESS  read-only                                 
           STATUS      current                                   
           DESCRIPTION                                           
              "Indicates the last retrained information performed on the line.                   
               Options:
               1. none(1)                           - No record is available                                                                                                       
               2. cpe-l3-trigger(2)                 - The terminal initiates a low power consumption L3 request                                                                           
               3. lom-us-trigger-dra(3)             - The upstream noise margin is smaller than the minimum noise margin in rate dynamic adjustment                                      
               4. lom-ds-trigger-dra(4)             - The downstream noise margin is smaller than the minimum noise margin in rate dynamic adjustment                                    
               5. cpe-never-answer-oam(5)           - No OAM response is received from the CPE all the time                                                                              
               6. cpe-no-more-answer-oam(6)         - No OAM response is received from the CPE                                                                                           
               7. persistent-ncd-us(7)              - Upstream continuous no cell delineation                                                                                                            
               8. persistent-ncd-ds(8)              - Downstream continuous no cell delineation                                                                                                          
               9. persistent-lcd-us(9)              - Upstream continuous loss of cell delineation                                                                                                            
               10.persistent-lcd-ds(10)             - Downstream continuous loss of cell delineation                                                                                                          
               11.l2-problem-co-drop(11)            - The CO is faulty during the switching from L0 to L2                                                                                
               12.l2-problem-cpe-drop(12)           - The CPE is faulty during the switching from L0 to L2                                                                               
               13.bitswap-refused-us-co-drop(13)    - The CO goes offline when the upstream bit swap fault occurs 10 times consecutively                                                 
               14.bitswap-refused-us-cpe-drop(14)   - The CPE goes offline when the downstream bit swap fault occurs 10 times consecutively                                              
               15.channel-change-us-co-drop(15)     - The CO goes offline when the upstream net rate changes                                                                             
               16.channel-change-us-cpe-drop(16)    - The CPE goes offline when the upstream net rate changes                                                                            
               17.noise-increase-us-co-drop(17)     - The CO goes offline when the upstream noise increases                                                                              
               18.noise-increase-us-cpe-drop(18)    - The CPE goes offline when the upstream noise increases                                                                             
               19.bitswap-refused-ds-co-drop(19)    - The CO goes offline when the downstream bit swap fault occurs 10 times consecutively                                               
               20.bitswap-refused-ds-cpe-drop(20)   - The CPE goes offline when the downstream bit swap fault occurs 10 times consecutively                                              
               21.channel-change-ds-co-drop(21)     - The CO goes offline when the downstream net rate changes                                                                           
               22.channel-change-ds-cpe-drop(22)    - The CPE goes offline when the downstream net rate changes                                                                          
               23.noise-increase-ds-co-drop(23)     - The CO goes offline when the downstream noise increases                                                                            
               24.noise-increase-ds-cpe-drop(24)    - The CPE goes offline when the downstream noise increases                                                                           
               25.lom-us-co-drop(25)                - The CO goes offline when the upstream noise margin is smaller than the minimum noise margin                                        
               26.lom-us-cpe-drop(26)               - The CPE goes offline when the upstream noise margin is smaller than the minimum noise margin                                       
               27.lom-ds-co-drop(27)                - The CO goes offline when the downstream noise margin is smaller than the minimum noise margin                                      
               28.lom-ds-cpe-drop(28)               - The CPE goes offline when the downstream noise margin is smaller than the minimum noise margin                                     
               29.sra-problem-us-co-drop(29)        - The CO goes offline when the upstream SRA is faulty                                                                                
               30.sra-problem-us-cpe-drop(30)       - The CPE goes offline when the upstream SRA is faulty                                                                               
               31.sra-failed-us-co-drop(31)         - The CO goes offline when the upstream SRA fails                                                                                    
               32.sra-failed-us-cpe-drop(32)        - The CPE goes offline when the upstream SRA fails                                                                                   
               33.sra-problem-ds-co-drop(33)        - The CO goes offline when the downstream SRA is fault                                                                               
               34.sra-problem-ds-cpe-drop(34)       - The CPE goes offline when the downstream SRA is faulty                                                                             
               35.sra-rejected-ds-co-drop(35)       - The CO goes offline when the downstream SRA is rejected                                                                            
               36.sra-rejected-ds-cpe-drop(36)      - The CPE goes offline when the downstream SRA is rejected                                                                           
               37.bitswap-problem-us-co-drop(37)    - The CO goes offline when the upstream bit swap is faulty                                                                           
               38.bitswap-problem-us-cpe-drop(38)   - The CPE goes offline when the upstream bit swap is faulty                                                                          
               39.bitswap-failed-us-co-drop(39)     - The CO goes offline when the upstream bit swap fails                                                                               
               40.bitswap-failed-us-cpe-drop(40)    - The CPE goes offline when the upstream bit swap fails                                                                              
               41.bitswap-problem-ds-co-drop(41)    - The CO goes offline when the downstream bit swap is faulty                                                                         
               42.bitswap-problem-ds-cpe-drop(42)   - The CPE goes offline when the downstream bit swap is faulty                                                                        
               43.bitswap-rejected-ds-co-drop(43)   - The CO goes offline when the downstream bit swap is rejected                                                                       
               44.bitswap-rejected-ds-cpe-drop(44)  - The CPE goes offline when the downstream bit swap is rejected                                                                      
               45.cpe-switched-off(45)              - The CPE power supply is shut down                                                                                                  
               46.cpe-lost(46)                      - The CPE is disconnected                                                                                                            
               47.co-reset(47)                      - The CO resets the chipset or line                                                                                                  
               48.co-stop(48)                       - The CO actively deactivate the port                                                                                               
               49.unknown(49)                       - Unknown reason                                                                                                                     
               "      
           ::= { hwadsl2LineEntry 8 }

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Indicates the last retrained information performed on the line. Options: 1. none(1) - No record is available 2. cpe-l3-trigger(2) - The terminal initiates a low power consumption L3 request 3. lom-us-trigger-dra(3) - The upstream noise margin is smaller than the minimum noise margin in rate dynamic adjustment 4. lom-ds-trigger-dra(4) - The downstream noise margin is smaller than the minimum noise margin in rate dynamic adjustment 5. cpe-never-answer-oam(5) - No OAM response is received from the CPE all the time 6. cpe-no-more-answer-oam(6) - No OAM response is received from the CPE 7. persistent-ncd-us(7) - Upstream continuous no cell delineation 8. persistent-ncd-ds(8) - Downstream continuous no cell delineation 9. persistent-lcd-us(9) - Upstream continuous loss of cell delineation 10.persistent-lcd-ds(10) - Downstream continuous loss of cell delineation 11.l2-problem-co-drop(11) - The CO is faulty during the switching from L0 to L2 12.l2-problem-cpe-drop(12) - The CPE is faulty during the switching from L0 to L2 13.bitswap-refused-us-co-drop(13) - The CO goes offline when the upstream bit swap fault occurs 10 times consecutively 14.bitswap-refused-us-cpe-drop(14) - The CPE goes offline when the downstream bit swap fault occurs 10 times consecutively 15.channel-change-us-co-drop(15) - The CO goes offline when the upstream net rate changes 16.channel-change-us-cpe-drop(16) - The CPE goes offline when the upstream net rate changes 17.noise-increase-us-co-drop(17) - The CO goes offline when the upstream noise increases 18.noise-increase-us-cpe-drop(18) - The CPE goes offline when the upstream noise increases 19.bitswap-refused-ds-co-drop(19) - The CO goes offline when the downstream bit swap fault occurs 10 times consecutively 20.bitswap-refused-ds-cpe-drop(20) - The CPE goes offline when the downstream bit swap fault occurs 10 times consecutively 21.channel-change-ds-co-drop(21) - The CO goes offline when the downstream net rate changes 22.channel-change-ds-cpe-drop(22) - The CPE goes offline when the downstream net rate changes 23.noise-increase-ds-co-drop(23) - The CO goes offline when the downstream noise increases 24.noise-increase-ds-cpe-drop(24) - The CPE goes offline when the downstream noise increases 25.lom-us-co-drop(25) - The CO goes offline when the upstream noise margin is smaller than the minimum noise margin 26.lom-us-cpe-drop(26) - The CPE goes offline when the upstream noise margin is smaller than the minimum noise margin 27.lom-ds-co-drop(27) - The CO goes offline when the downstream noise margin is smaller than the minimum noise margin 28.lom-ds-cpe-drop(28) - The CPE goes offline when the downstream noise margin is smaller than the minimum noise margin 29.sra-problem-us-co-drop(29) - The CO goes offline when the upstream SRA is faulty 30.sra-problem-us-cpe-drop(30) - The CPE goes offline when the upstream SRA is faulty 31.sra-failed-us-co-drop(31) - The CO goes offline when the upstream SRA fails 32.sra-failed-us-cpe-drop(32) - The CPE goes offline when the upstream SRA fails 33.sra-problem-ds-co-drop(33) - The CO goes offline when the downstream SRA is fault 34.sra-problem-ds-cpe-drop(34) - The CPE goes offline when the downstream SRA is faulty 35.sra-rejected-ds-co-drop(35) - The CO goes offline when the downstream SRA is rejected 36.sra-rejected-ds-cpe-drop(36) - The CPE goes offline when the downstream SRA is rejected 37.bitswap-problem-us-co-drop(37) - The CO goes offline when the upstream bit swap is faulty 38.bitswap-problem-us-cpe-drop(38) - The CPE goes offline when the upstream bit swap is faulty 39.bitswap-failed-us-co-drop(39) - The CO goes offline when the upstream bit swap fails 40.bitswap-failed-us-cpe-drop(40) - The CPE goes offline when the upstream bit swap fails 41.bitswap-problem-ds-co-drop(41) - The CO goes offline when the downstream bit swap is faulty 42.bitswap-problem-ds-cpe-drop(42) - The CPE goes offline when the downstream bit swap is faulty 43.bitswap-rejected-ds-co-drop(43) - The CO goes offline when the downstream bit swap is rejected 44.bitswap-rejected-ds-cpe-drop(44) - The CPE goes offline when the downstream bit swap is rejected 45.cpe-switched-off(45) - The CPE power supply is shut down 46.cpe-lost(46) - The CPE is disconnected 47.co-reset(47) - The CO resets the chipset or line 48.co-stop(48) - The CO actively deactivate the port 49.unknown(49) - Unknown reason

Sources for this description

Huawei MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1Huawei MIB copies (LibreNMS/Observium Community)1 record · 1 source

Description 1

hwadsl2LineStatusLastRetrainInfo · currentHuawei MIB copies (LibreNMS/Observium Community)1 source

Status in source: current.

Names: hwadsl2LineStatusLastRetrainInfo

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "hwadsl2LineStatusLastRetrainInfo",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "none",
    "(",
    "1",
    ")",
    ",",
    "cpe-l3-trigger",
    "(",
    "2",
    ")",
    ",",
    "lom-us-trigger-dra",
    "(",
    "3",
    ")",
    ",",
    "lom-ds-trigger-dra",
    "(",
    "4",
    ")",
    ",",
    "cpe-never-answer-oam",
    "(",
    "5",
    ")",
    ",",
    "cpe-no-more-answer-oam",
    "(",
    "6",
    ")",
    ",",
    "persistent-ncd-us",
    "(",
    "7",
    ")",
    ",",
    "persistent-ncd-ds",
    "(",
    "8",
    ")",
    ",",
    "persistent-lcd-us",
    "(",
    "9",
    ")",
    ",",
    "persistent-lcd-ds",
    "(",
    "10",
    ")",
    ",",
    "l2-problem-co-drop",
    "(",
    "11",
    ")",
    ",",
    "l2-problem-cpe-drop",
    "(",
    "12",
    ")",
    ",",
    "bitswap-refused-us-co-drop",
    "(",
    "13",
    ")",
    ",",
    "bitswap-refused-us-cpe-drop",
    "(",
    "14",
    ")",
    ",",
    "channel-change-us-co-drop",
    "(",
    "15",
    ")",
    ",",
    "channel-change-us-cpe-drop",
    "(",
    "16",
    ")",
    ",",
    "noise-increase-us-co-drop",
    "(",
    "17",
    ")",
    ",",
    "noise-increase-us-cpe-drop",
    "(",
    "18",
    ")",
    ",",
    "bitswap-refused-ds-co-drop",
    "(",
    "19",
    ")",
    ",",
    "bitswap-refused-ds-cpe-drop",
    "(",
    "20",
    ")",
    ",",
    "channel-change-ds-co-drop",
    "(",
    "21",
    ")",
    ",",
    "channel-change-ds-cpe-drop",
    "(",
    "22",
    ")",
    ",",
    "noise-increase-ds-co-drop",
    "(",
    "23",
    ")",
    ",",
    "noise-increase-ds-cpe-drop",
    "(",
    "24",
    ")",
    ",",
    "lom-us-co-drop",
    "(",
    "25",
    ")",
    ",",
    "lom-us-cpe-drop",
    "(",
    "26",
    ")",
    ",",
    "lom-ds-co-drop",
    "(",
    "27",
    ")",
    ",",
    "lom-ds-cpe-drop",
    "(",
    "28",
    ")",
    ",",
    "sra-problem-us-co-drop",
    "(",
    "29",
    ")",
    ",",
    "sra-problem-us-cpe-drop",
    "(",
    "30",
    ")",
    ",",
    "sra-failed-us-co-drop",
    "(",
    "31",
    ")",
    ",",
    "sra-failed-us-cpe-drop",
    "(",
    "32",
    ")",
    ",",
    "sra-problem-ds-co-drop",
    "(",
    "33",
    ")",
    ",",
    "sra-problem-ds-cpe-drop",
    "(",
    "34",
    ")",
    ",",
    "sra-rejected-ds-co-drop",
    "(",
    "35",
    ")",
    ",",
    "sra-rejected-ds-cpe-drop",
    "(",
    "36",
    ")",
    ",",
    "bitswap-problem-us-co-drop",
    "(",
    "37",
    ")",
    ",",
    "bitswap-problem-us-cpe-drop",
    "(",
    "38",
    ")",
    ",",
    "bitswap-failed-us-co-drop",
    "(",
    "39",
    ")",
    ",",
    "bitswap-failed-us-cpe-drop",
    "(",
    "40",
    ")",
    ",",
    "bitswap-problem-ds-co-drop",
    "(",
    "41",
    ")",
    ",",
    "bitswap-problem-ds-cpe-drop",
    "(",
    "42",
    ")",
    ",",
    "bitswap-rejected-ds-co-drop",
    "(",
    "43",
    ")",
    ",",
    "bitswap-rejected-ds-cpe-drop",
    "(",
    "44",
    ")",
    ",",
    "cpe-switched-off",
    "(",
    "45",
    ")",
    ",",
    "cpe-lost",
    "(",
    "46",
    ")",
    ",",
    "co-reset",
    "(",
    "47",
    ")",
    ",",
    "co-stop",
    "(",
    "48",
    ")",
    ",",
    "unknown",
    "(",
    "49",
    ")",
    "}",
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"Indicates the last retrained information performed on the line. Options: 1. none(1) - No record is available 2. cpe-l3-trigger(2) - The terminal initiates a low power consumption L3 request 3. lom-us-trigger-dra(3) - The upstream noise margin is smaller than the minimum noise margin in rate dynamic adjustment 4. lom-ds-trigger-dra(4) - The downstream noise margin is smaller than the minimum noise margin in rate dynamic adjustment 5. cpe-never-answer-oam(5) - No OAM response is received from the CPE all the time 6. cpe-no-more-answer-oam(6) - No OAM response is received from the CPE 7. persistent-ncd-us(7) - Upstream continuous no cell delineation 8. persistent-ncd-ds(8) - Downstream continuous no cell delineation 9. persistent-lcd-us(9) - Upstream continuous loss of cell delineation 10.persistent-lcd-ds(10) - Downstream continuous loss of cell delineation 11.l2-problem-co-drop(11) - The CO is faulty during the switching from L0 to L2 12.l2-problem-cpe-drop(12) - The CPE is faulty during the switching from L0 to L2 13.bitswap-refused-us-co-drop(13) - The CO goes offline when the upstream bit swap fault occurs 10 times consecutively 14.bitswap-refused-us-cpe-drop(14) - The CPE goes offline when the downstream bit swap fault occurs 10 times consecutively 15.channel-change-us-co-drop(15) - The CO goes offline when the upstream net rate changes 16.channel-change-us-cpe-drop(16) - The CPE goes offline when the upstream net rate changes 17.noise-increase-us-co-drop(17) - The CO goes offline when the upstream noise increases 18.noise-increase-us-cpe-drop(18) - The CPE goes offline when the upstream noise increases 19.bitswap-refused-ds-co-drop(19) - The CO goes offline when the downstream bit swap fault occurs 10 times consecutively 20.bitswap-refused-ds-cpe-drop(20) - The CPE goes offline when the downstream bit swap fault occurs 10 times consecutively 21.channel-change-ds-co-drop(21) - The CO goes offline when the downstream net rate changes 22.channel-change-ds-cpe-drop(22) - The CPE goes offline when the downstream net rate changes 23.noise-increase-ds-co-drop(23) - The CO goes offline when the downstream noise increases 24.noise-increase-ds-cpe-drop(24) - The CPE goes offline when the downstream noise increases 25.lom-us-co-drop(25) - The CO goes offline when the upstream noise margin is smaller than the minimum noise margin 26.lom-us-cpe-drop(26) - The CPE goes offline when the upstream noise margin is smaller than the minimum noise margin 27.lom-ds-co-drop(27) - The CO goes offline when the downstream noise margin is smaller than the minimum noise margin 28.lom-ds-cpe-drop(28) - The CPE goes offline when the downstream noise margin is smaller than the minimum noise margin 29.sra-problem-us-co-drop(29) - The CO goes offline when the upstream SRA is faulty 30.sra-problem-us-cpe-drop(30) - The CPE goes offline when the upstream SRA is faulty 31.sra-failed-us-co-drop(31) - The CO goes offline when the upstream SRA fails 32.sra-failed-us-cpe-drop(32) - The CPE goes offline when the upstream SRA fails 33.sra-problem-ds-co-drop(33) - The CO goes offline when the downstream SRA is fault 34.sra-problem-ds-cpe-drop(34) - The CPE goes offline when the downstream SRA is faulty 35.sra-rejected-ds-co-drop(35) - The CO goes offline when the downstream SRA is rejected 36.sra-rejected-ds-cpe-drop(36) - The CPE goes offline when the downstream SRA is rejected 37.bitswap-problem-us-co-drop(37) - The CO goes offline when the upstream bit swap is faulty 38.bitswap-problem-us-cpe-drop(38) - The CPE goes offline when the upstream bit swap is faulty 39.bitswap-failed-us-co-drop(39) - The CO goes offline when the upstream bit swap fails 40.bitswap-failed-us-cpe-drop(40) - The CPE goes offline when the upstream bit swap fails 41.bitswap-problem-ds-co-drop(41) - The CO goes offline when the downstream bit swap is faulty 42.bitswap-problem-ds-cpe-drop(42) - The CPE goes offline when the downstream bit swap is faulty 43.bitswap-rejected-ds-co-drop(43) - The CO goes offline when the downstream bit swap is rejected 44.bitswap-rejected-ds-cpe-drop(44) - The CPE goes offline when the downstream bit swap is rejected 45.cpe-switched-off(45) - The CPE power supply is shut down 46.cpe-lost(46) - The CPE is disconnected 47.co-reset(47) - The CO resets the chipset or line 48.co-stop(48) - The CO actively deactivate the port 49.unknown(49) - Unknown reason \"",
    "::=",
    "{",
    "hwadsl2LineEntry",
    "8",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "none",
            1
          ],
          [
            "cpe-l3-trigger",
            2
          ],
          [
            "lom-us-trigger-dra",
            3
          ],
          [
            "lom-ds-trigger-dra",
            4
          ],
          [
            "cpe-never-answer-oam",
            5
          ],
          [
            "cpe-no-more-answer-oam",
            6
          ],
          [
            "persistent-ncd-us",
            7
          ],
          [
            "persistent-ncd-ds",
            8
          ],
          [
            "persistent-lcd-us",
            9
          ],
          [
            "persistent-lcd-ds",
            10
          ],
          [
            "l2-problem-co-drop",
            11
          ],
          [
            "l2-problem-cpe-drop",
            12
          ],
          [
            "bitswap-refused-us-co-drop",
            13
          ],
          [
            "bitswap-refused-us-cpe-drop",
            14
          ],
          [
            "channel-change-us-co-drop",
            15
          ],
          [
            "channel-change-us-cpe-drop",
            16
          ],
          [
            "noise-increase-us-co-drop",
            17
          ],
          [
            "noise-increase-us-cpe-drop",
            18
          ],
          [
            "bitswap-refused-ds-co-drop",
            19
          ],
          [
            "bitswap-refused-ds-cpe-drop",
            20
          ],
          [
            "channel-change-ds-co-drop",
            21
          ],
          [
            "channel-change-ds-cpe-drop",
            22
          ],
          [
            "noise-increase-ds-co-drop",
            23
          ],
          [
            "noise-increase-ds-cpe-drop",
            24
          ],
          [
            "lom-us-co-drop",
            25
          ],
          [
            "lom-us-cpe-drop",
            26
          ],
          [
            "lom-ds-co-drop",
            27
          ],
          [
            "lom-ds-cpe-drop",
            28
          ],
          [
            "sra-problem-us-co-drop",
            29
          ],
          [
            "sra-problem-us-cpe-drop",
            30
          ],
          [
            "sra-failed-us-co-drop",
            31
          ],
          [
            "sra-failed-us-cpe-drop",
            32
          ],
          [
            "sra-problem-ds-co-drop",
            33
          ],
          [
            "sra-problem-ds-cpe-drop",
            34
          ],
          [
            "sra-rejected-ds-co-drop",
            35
          ],
          [
            "sra-rejected-ds-cpe-drop",
            36
          ],
          [
            "bitswap-problem-us-co-drop",
            37
          ],
          [
            "bitswap-problem-us-cpe-drop",
            38
          ],
          [
            "bitswap-failed-us-co-drop",
            39
          ],
          [
            "bitswap-failed-us-cpe-drop",
            40
          ],
          [
            "bitswap-problem-ds-co-drop",
            41
          ],
          [
            "bitswap-problem-ds-cpe-drop",
            42
          ],
          [
            "bitswap-rejected-ds-co-drop",
            43
          ],
          [
            "bitswap-rejected-ds-cpe-drop",
            44
          ],
          [
            "cpe-switched-off",
            45
          ],
          [
            "cpe-lost",
            46
          ],
          [
            "co-reset",
            47
          ],
          [
            "co-stop",
            48
          ],
          [
            "unknown",
            49
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "Indicates the last retrained information performed on the line. Options: 1. none(1) - No record is available 2. cpe-l3-trigger(2) - The terminal initiates a low power consumption L3 request 3. lom-us-trigger-dra(3) - The upstream noise margin is smaller than the minimum noise margin in rate dynamic adjustment 4. lom-ds-trigger-dra(4) - The downstream noise margin is smaller than the minimum noise margin in rate dynamic adjustment 5. cpe-never-answer-oam(5) - No OAM response is received from the CPE all the time 6. cpe-no-more-answer-oam(6) - No OAM response is received from the CPE 7. persistent-ncd-us(7) - Upstream continuous no cell delineation 8. persistent-ncd-ds(8) - Downstream continuous no cell delineation 9. persistent-lcd-us(9) - Upstream continuous loss of cell delineation 10.persistent-lcd-ds(10) - Downstream continuous loss of cell delineation 11.l2-problem-co-drop(11) - The CO is faulty during the switching from L0 to L2 12.l2-problem-cpe-drop(12) - The CPE is faulty during the switching from L0 to L2 13.bitswap-refused-us-co-drop(13) - The CO goes offline when the upstream bit swap fault occurs 10 times consecutively 14.bitswap-refused-us-cpe-drop(14) - The CPE goes offline when the downstream bit swap fault occurs 10 times consecutively 15.channel-change-us-co-drop(15) - The CO goes offline when the upstream net rate changes 16.channel-change-us-cpe-drop(16) - The CPE goes offline when the upstream net rate changes 17.noise-increase-us-co-drop(17) - The CO goes offline when the upstream noise increases 18.noise-increase-us-cpe-drop(18) - The CPE goes offline when the upstream noise increases 19.bitswap-refused-ds-co-drop(19) - The CO goes offline when the downstream bit swap fault occurs 10 times consecutively 20.bitswap-refused-ds-cpe-drop(20) - The CPE goes offline when the downstream bit swap fault occurs 10 times consecutively 21.channel-change-ds-co-drop(21) - The CO goes offline when the downstream net rate changes 22.channel-change-ds-cpe-drop(22) - The CPE goes offline when the downstream net rate changes 23.noise-increase-ds-co-drop(23) - The CO goes offline when the downstream noise increases 24.noise-increase-ds-cpe-drop(24) - The CPE goes offline when the downstream noise increases 25.lom-us-co-drop(25) - The CO goes offline when the upstream noise margin is smaller than the minimum noise margin 26.lom-us-cpe-drop(26) - The CPE goes offline when the upstream noise margin is smaller than the minimum noise margin 27.lom-ds-co-drop(27) - The CO goes offline when the downstream noise margin is smaller than the minimum noise margin 28.lom-ds-cpe-drop(28) - The CPE goes offline when the downstream noise margin is smaller than the minimum noise margin 29.sra-problem-us-co-drop(29) - The CO goes offline when the upstream SRA is faulty 30.sra-problem-us-cpe-drop(30) - The CPE goes offline when the upstream SRA is faulty 31.sra-failed-us-co-drop(31) - The CO goes offline when the upstream SRA fails 32.sra-failed-us-cpe-drop(32) - The CPE goes offline when the upstream SRA fails 33.sra-problem-ds-co-drop(33) - The CO goes offline when the downstream SRA is fault 34.sra-problem-ds-cpe-drop(34) - The CPE goes offline when the downstream SRA is faulty 35.sra-rejected-ds-co-drop(35) - The CO goes offline when the downstream SRA is rejected 36.sra-rejected-ds-cpe-drop(36) - The CPE goes offline when the downstream SRA is rejected 37.bitswap-problem-us-co-drop(37) - The CO goes offline when the upstream bit swap is faulty 38.bitswap-problem-us-cpe-drop(38) - The CPE goes offline when the upstream bit swap is faulty 39.bitswap-failed-us-co-drop(39) - The CO goes offline when the upstream bit swap fails 40.bitswap-failed-us-cpe-drop(40) - The CPE goes offline when the upstream bit swap fails 41.bitswap-problem-ds-co-drop(41) - The CO goes offline when the downstream bit swap is faulty 42.bitswap-problem-ds-cpe-drop(42) - The CPE goes offline when the downstream bit swap is faulty 43.bitswap-rejected-ds-co-drop(43) - The CO goes offline when the downstream bit swap is rejected 44.bitswap-rejected-ds-cpe-drop(44) - The CPE goes offline when the downstream bit swap is rejected 45.cpe-switched-off(45) - The CPE power supply is shut down 46.cpe-lost(46) - The CPE is disconnected 47.co-reset(47) - The CO resets the chipset or line 48.co-stop(48) - The CO actively deactivate the port 49.unknown(49) - Unknown reason"
    ],
    null,
    null,
    null,
    null
  ]
}
  • Huawei MIB copies (LibreNMS/Observium Community) · Publisher's source file: Source package: observium-community-latest.tar.gz

    Vendor MIB copy from the Observium Community archive. Huawei support.

    Module: HUAWEI-NGADSL-LINE-MIB

    See published definition above

    Module imports
    {'IF-MIB': ['ifIndex'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DateAndTime'], 'HUAWEI-MIB': ['huaweiUtility'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'Gauge32', 'OBJECT-TYPE', 'Unsigned32', 'Counter32', 'Integer32', 'NOTIFICATION-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'ADSL2-LINE-MIB': ['adsl2', 'adsl2PMLCurrUnit', 'adsl2PMLHist15MUnit', 'adsl2PMLHist15MInterval', 'adsl2PMLHistInit15MInterval', 'adsl2PMLHist1DUnit', 'adsl2PMLHist1DInterval', 'adsl2PMLHistinit1DInterval', 'adsl2ChannelStatusEntry', 'adsl2ChAlarmConfProfileEntry', 'adsl2PMLineCurrEntry', 'adsl2PMLineCurrInitEntry', 'adsl2PMChCurrEntry', 'adsl2LineConfProfEntry', 'adsl2SCStatusEntry', 'adsl2LineEntry', 'adsl2ChStatusUnit', 'adsl2PMChCurrUnit', 'adsl2PMChHist15MUnit', 'adsl2PMChHist15MInterval', 'adsl2PMChHist1DUnit', 'adsl2PMChHist1DInterval', 'adsl2LConfProfProfileName', 'adsl2SCStatusDirection', 'adsl2LineAlarmConfProfileName', 'adsl2ChAlarmConfProfileName', 'adsl2ChConfProfProfileName', 'adsl2LineCmndConfLdsfFailReason', 'adsl2ChStatusActDataRate', 'adsl2ChStatusChannelNum'], 'HUAWEI-DEVICE-MIB': ['hwFrameIndex', 'hwSlotIndex', 'hwPortIndex', 'hwPortOperStatus', 'hwPortPrimaryStatus', 'hwPortSecondaryStatus'], 'HC-PerfHist-TC-MIB': ['HCPerfIntervalThreshold', 'HCPerfTimeElapsed']}
    · Download HUAWEI-NGADSL-LINE-MIB

    Related source files and packages:

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.2011)

Lwu Zhao

Siblings (9)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.2011.6.138.1.1.1.1.1 hwadsl2LineStatusCodingGainDsInfo00
1.3.6.1.4.1.2011.6.138.1.1.1.1.2 hwadsl2LineStatusCodingGainUsInfo00
1.3.6.1.4.1.2011.6.138.1.1.1.1.3 hwadsl2LineStatusPcbDsInfo00
1.3.6.1.4.1.2011.6.138.1.1.1.1.4 hwadsl2LineStatusPcbUsInfo00
1.3.6.1.4.1.2011.6.138.1.1.1.1.5 hwadsl2DynamicprofileInfo00
1.3.6.1.4.1.2011.6.138.1.1.1.1.6 hwadsl2LineStatusInitResult00
1.3.6.1.4.1.2011.6.138.1.1.1.1.7 hwadsl2LineStatusRtxUsedDs00
1.3.6.1.4.1.2011.6.138.1.1.1.1.9 hwadsl2LineStatusLineRateDs00
1.3.6.1.4.1.2011.6.138.1.1.1.1.10 hwadsl2LineStatusLineRateUs00