The object is used to start the port auto ping test. options: 1.start(1) - Starts the port auto ping test. 2.invalid(-1) - Indicates that no information is detected.
Sources for this description
Huawei MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.2011.6.145.1.1.1.45.1.1
The object is used to start the port auto ping test. options: 1.start(1) - Starts the port auto ping test. 2.invalid(-1) - Indicates that no information is detected.
Identification
{1 3 6 1 4 1 2011 6 145 1 1 1 45 1 1}
| Value | Name |
|---|---|
| -1 | invalid |
| 1 | start |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: ifIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.2011.6.145.1.1.1.45.1.1
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
hwXponPortAutoPingStart OBJECT-TYPE
SYNTAX INTEGER
{
start(1),
invalid(-1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object is used to start the port auto ping test.
options:
1.start(1) - Starts the port auto ping test.
2.invalid(-1) - Indicates that no information is detected.
"
::= { hwXponPortAutoPingEntry 1 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The object is used to start the port auto ping test. options: 1.start(1) - Starts the port auto ping test. 2.invalid(-1) - Indicates that no information is detected.
Huawei MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: hwXponPortAutoPingStart
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"hwXponPortAutoPingStart",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"start",
"(",
"1",
")",
",",
"invalid",
"(",
"-",
"1",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The object is used to start the port auto ping test. options: 1.start(1) - Starts the port auto ping test. 2.invalid(-1) - Indicates that no information is detected. \"",
"::=",
"{",
"hwXponPortAutoPingEntry",
"1",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"start",
1
],
[
"invalid",
-1
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The object is used to start the port auto ping test. options: 1.start(1) - Starts the port auto ping test. 2.invalid(-1) - Indicates that no information is detected."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive. Huawei support.
Module: HUAWEI-XPON-COMMON-MIB
See published definition above
{'IF-MIB': ['ifIndex'], 'RMON-MIB': ['OwnerString', 'EntryStatus'], 'SNMPv2-TC': ['TruthValue', 'DateAndTime', 'RowStatus', 'MacAddress', 'TEXTUAL-CONVENTION'], 'HUAWEI-MIB': ['huaweiMgmt', 'huaweiUtility'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'mib-2', 'OBJECT-TYPE', 'Counter32', 'Counter64', 'Unsigned32', 'Integer32', 'zeroDotZero', 'IpAddress', 'Gauge32', 'NOTIFICATION-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'HUAWEI-DEVICE-MIB': ['hwFrameIndex', 'hwSlotIndex']}Related source files and packages:
Same file in Observium Community.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.6.145.1.1.1.45.1.2 | hwXponPortAutoPingClearResult | 0 | 0 |