if the state of Mirroring is enabled by selecting one of the
first three values , then the Mirroring explained above works.
If disabled, port operation works normally. No Traffic
gets routed from MirroringSourcePort to Destination Mirrored Port.
Mirroring of both transmit and receive activity can only be
done if the port is half duplex. Choose both only if you know
the port will be run in half duplex mode.
Parsed from file atswtch2.mib.txt
Company: None
Module: ATSWTCH2-MIB
if the state of Mirroring is enabled by selecting one of the
first three values , then the Mirroring explained above works.
If disabled, port operation works normally. No Traffic
gets routed from MirroringSourcePort to Destination Mirrored Port.
Mirroring of both transmit and receive activity can only be
done if the port is half duplex. Choose both only if you know
the port will be run in half duplex mode.
Parsed from file ATSWTCH2-MIB.mib
Module: ATSWTCH2-MIB
Vendor: Allied Telesis, Inc.
Module: ATSWTCH2-MIB
[Automatically extracted from oidview.com]
atswitchMirrorState OBJECT-TYPE SYNTAX INTEGER { receive(1), transmit(2), both(3), disabled(4) } ACCESS read-write STATUS mandatory DESCRIPTION " if the state of Mirroring is enabled by selecting one of the first three values , then the Mirroring explained above works. If disabled, port operation works normally. No Traffic gets routed from MirroringSourcePort to Destination Mirrored Port. Mirroring of both transmit and receive activity can only be done if the port is half duplex. Choose both only if you know the port will be run in half duplex mode. " ::= { atswitchConfigGroup 3 }
atswitchMirrorState OBJECT-TYPE SYNTAX INTEGER { receive(1), transmit(2), both(3), disabled(4) } ACCESS read-write STATUS mandatory DESCRIPTION " if the state of Mirroring is enabled by selecting one of the first three values , then the Mirroring explained above works. If disabled, port operation works normally. No Traffic gets routed from MirroringSourcePort to Destination Mirrored Port. Mirroring of both transmit and receive activity can only be done if the port is half duplex. Choose both only if you know the port will be run in half duplex mode. " ::= { atswitchConfigGroup 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.207.8.10.2.3.0 | atswitchMirrorState | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.207.8.10.2.1 | atswitchPortDisableOnSecurityViolation | 1 | 1 | This System wide attribute allows the port to be disabled on Violation of the Security. or suspend the port due to Duplicate Add… |
| 1.3.6.1.4.1.207.8.10.2.2 | atswitchMirroringSourcePort | 1 | 1 | This is the Source port number for which there is another mirror port.If the atswitchEthConfigMirrorState is Enabled then ,the mi… |
| 1.3.6.1.4.1.207.8.10.2.4 | atswitchMirroringDestinationPort | 1 | 1 | This is the Destination port number for which there is another mirror port.If the atswitchEthConfigMirrorState is Enabled then ,t… |
| 1.3.6.1.4.1.207.8.10.2.5 | atswitchSecurityConfig | 1 | 1 | This Object is suppported only in 37XX product Line. Security feature configuration Object. The Security disable would let the de… |
| 1.3.6.1.4.1.207.8.10.2.6 | atswitchSecurityAction | 1 | 1 | Security Action to be carried when the atswitchSecurityConfig is enabled-with-learning-locked or limted-enabled. |
| 1.3.6.1.4.1.207.8.10.2.7 | atswitchDebugAvailableBytes | 1 | 1 | This is strictly for Debug reason and this object should not be beleived as the correct number |
| 1.3.6.1.4.1.207.8.10.2.8 | atswitchTrunkConfig | 1 | 1 | atswitchtrunkConfig |