OID reference
1.3.6.1.4.1.207.8.17.2.1.1.15
This object is used to set the MDIO of this port for required cable connection type. For straight-through cable set to mdi and for cross-over cable set to mdix. This limit can be used for both BackPressure and FlowControl Limits. Note: The range of 1 to 7935 is supported on the 94xx family.
Identification
{1 3 6 1 4 1 207 8 17 2 1 1 15}
Definitions may combine these properties differently.
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In AtiEdgeSwitch-MIB, the row index consists of these components in order:
atiStkSwModuleId (Integer32): one numeric subidentifier for the non-negative value.atiStkSwPortId (Integer32): one numeric subidentifier for the non-negative value.An instance has the form .1.3.6.1.4.1.207.8.17.2.1.1.15.<atiStkSwModuleId>.<atiStkSwPortId>. Use values present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.207.8.17.2.1.1.15
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 3 distinct definitions; some records may not include a definition.
atiStkSwPortBackPressureLimit OBJECT-TYPE
SYNTAX Integer32 (1..7935)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set the MDIO of this port for required
cable connection type. For straight-through cable set to mdi
and for cross-over cable set to mdix. This limit can be used
for both BackPressure and FlowControl Limits.
Note: The range of 1 to 7935 is supported on the 94xx family."
::= { atiStkSwPortConfigEntry 15 }atiStkSwPortBackPressureLimit OBJECT-TYPE
SYNTAX Integer32(1..7935)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set the MDIO of this port for required
cable connection type. For straight-through cable set to mdi
and for cross-over cable set to mdix. This limit can be used
for both BackPressure and FlowControl Limits.
Note: The range of 1 to 7935 is supported on the 94xx family."
::= { atiStkSwPortConfigEntry 15 }atiStkSwPortBackPressureLimit OBJECT-TYPE
SYNTAX Integer32(1..57344)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to set the MDIO of this port for required
cable connection type. For straight-through cable set to mdi
and for cross-over cable set to mdix. This limit can be used
for both BackPressure and FlowControl Limits.
Note: The range of 1 to 7935 is supported on the 94xx family."
::= { atiStkSwPortConfigEntry 15 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This object is used to set the MDIO of this port for required cable connection type. For straight-through cable set to mdi and for cross-over cable set to mdix. This limit can be used for both BackPressure and FlowControl Limits. Note: The range of 1 to 7935 is supported on the 94xx family.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: atiStkSwPortBackPressureLimit
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"atiStkSwPortBackPressureLimit",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"1",
".",
".",
"7935",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object is used to set the MDIO of this port for required cable connection type. For straight-through cable set to mdi and for cross-over cable set to mdix. This limit can be used for both BackPressure and FlowControl Limits. Note: The range of 1 to 7935 is supported on the 94xx family.\"",
"::=",
"{",
"atiStkSwPortConfigEntry",
"15",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
1,
7935
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object is used to set the MDIO of this port for required cable connection type. For straight-through cable set to mdi and for cross-over cable set to mdix. This limit can be used for both BackPressure and FlowControl Limits. Note: The range of 1 to 7935 is supported on the 94xx family."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: AtiEdgeSwitch-MIB
See published definition above
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'MacAddress'], 'SNMPv2-SMI': ['IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Counter64', 'Counter32', 'TimeTicks', 'Gauge32'], 'RFC1155-SMI': ['enterprises']}Related source files and packages:
Vendor MIB copy from the Observium Community archive.
Module: AtiStackSwitch-MIB
See published definition above
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'MacAddress'], 'SNMPv2-SMI': ['IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Counter64', 'Counter32', 'TimeTicks'], 'RFC1155-SMI': ['enterprises']}Related source files and packages:
Vendor MIB copy from the Observium Community archive.
Module: AtiStackSwitch9000-MIB
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'MacAddress'], 'SNMPv2-SMI': ['IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Counter64', 'Counter32', 'TimeTicks'], 'RFC1155-SMI': ['enterprises']}Status in source: current.
Names: atiStkSwPortBackPressureLimit
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"atiStkSwPortBackPressureLimit",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"1",
".",
".",
"57344",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object is used to set the MDIO of this port for required cable connection type. For straight-through cable set to mdi and for cross-over cable set to mdix. This limit can be used for both BackPressure and FlowControl Limits. Note: The range of 1 to 7935 is supported on the 94xx family.\"",
"::=",
"{",
"atiStkSwPortConfigEntry",
"15",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
1,
57344
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object is used to set the MDIO of this port for required cable connection type. For straight-through cable set to mdi and for cross-over cable set to mdix. This limit can be used for both BackPressure and FlowControl Limits. Note: The range of 1 to 7935 is supported on the 94xx family."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: AtiStackSwitch9424-MIB
See published definition above
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'MacAddress'], 'SNMPv2-SMI': ['IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Counter64', 'Counter32', 'TimeTicks'], 'RFC1155-SMI': ['enterprises']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.207.8.17.2.1.1.1 | atiStkSwModuleId | 0 | 0 | |
| 1.3.6.1.4.1.207.8.17.2.1.1.2 | atiStkSwPortId | 0 | 0 | |
| 1.3.6.1.4.1.207.8.17.2.1.1.3 | atiStkSwPortName | 0 | 0 | |
| 1.3.6.1.4.1.207.8.17.2.1.1.4 | atiStkSwPortState | 0 | 0 | |
| 1.3.6.1.4.1.207.8.17.2.1.1.5 | atiStkSwPortLinkState | 0 | 0 | |
| 1.3.6.1.4.1.207.8.17.2.1.1.6 | atiStkSwPortNegotiation | 0 | 0 | |
| 1.3.6.1.4.1.207.8.17.2.1.1.7 | atiStkSwPortSpeed | 0 | 0 | |
| 1.3.6.1.4.1.207.8.17.2.1.1.8 | atiStkSwPortDuplexStatus | 0 | 0 | |
| 1.3.6.1.4.1.207.8.17.2.1.1.9 | atiStkSwPortFlowControl | 0 | 0 | |
| 1.3.6.1.4.1.207.8.17.2.1.1.10 | atiStkSwPortBackPressure | 0 | 0 | |
| 1.3.6.1.4.1.207.8.17.2.1.1.11 | atiStkSwPortPriority | 0 | 0 | |
| 1.3.6.1.4.1.207.8.17.2.1.1.12 | atiStkSwPortBroadcastProcessing | 0 | 0 | |
| 1.3.6.1.4.1.207.8.17.2.1.1.13 | atiStkSwPortMDIO | 0 | 0 | |
| 1.3.6.1.4.1.207.8.17.2.1.1.14 | atiStkSwPortHOLLimit | 0 | 0 | |
| 1.3.6.1.4.1.207.8.17.2.1.1.16 | atiStkSwPortSTPState | 0 | 0 |