This object allows an admin request to configure the port to either autosense or one of the different speed-duplex combinations.
Sources for this description
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.207.8.17.2.1.1.6
This object allows an admin request to configure the port to either autosense or one of the different speed-duplex combinations.
Identification
{1 3 6 1 4 1 207 8 17 2 1 1 6}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 1 | autosense | 1, 2 |
| 2 | forceHalfDuplex-10M | 1, 2 |
| 3 | forceHalfDuplex-100M | 1, 2 |
| 4 | forceHalfDuplex-1G | 1, 2 |
| 5 | forceFullDuplex-10M | 1, 2 |
| 6 | forceFullDuplex-100M | 1, 2 |
| 7 | forceFullDuplex-1G | 1, 2 |
| 8 | autoHalfDuplex-10M | 2 |
| 9 | autoHalfDuplex-100M | 2 |
| 10 | autoFullDuplex-10M | 2 |
| 11 | autoFullDuplex-100M | 2 |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In AtiEdgeSwitch-MIB, the row index consists of these components in order:
atiStkSwModuleId (Integer32): one numeric subidentifier for the non-negative value.atiStkSwPortId (Integer32): one numeric subidentifier for the non-negative value.An instance has the form .1.3.6.1.4.1.207.8.17.2.1.1.6.<atiStkSwModuleId>.<atiStkSwPortId>. Use values present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.207.8.17.2.1.1.6
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 3 distinct definitions; some records may not include a definition.
atiStkSwPortNegotiation OBJECT-TYPE
SYNTAX INTEGER {
autosense (1),
forceHalfDuplex-10M (2),
forceHalfDuplex-100M (3),
forceHalfDuplex-1G (4),
forceFullDuplex-10M (5),
forceFullDuplex-100M (6),
forceFullDuplex-1G (7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows an admin request to configure the port
to either autosense or one of the different speed-duplex
combinations."
::= { atiStkSwPortConfigEntry 6 }atiStkSwPortNegotiation OBJECT-TYPE
SYNTAX INTEGER {
autosense (1),
forceHalfDuplex-10M (2),
forceHalfDuplex-100M (3),
forceHalfDuplex-1G (4),
forceFullDuplex-10M (5),
forceFullDuplex-100M (6),
forceFullDuplex-1G (7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows an admin request to configure the port
to either autosense or one of the different speed-duplex
combinations."
::= { atiStkSwPortConfigEntry 6 }atiStkSwPortNegotiation OBJECT-TYPE
SYNTAX INTEGER {
autosense (1),
forceHalfDuplex-10M (2),
forceHalfDuplex-100M (3),
forceHalfDuplex-1G (4),
forceFullDuplex-10M (5),
forceFullDuplex-100M (6),
forceFullDuplex-1G (7),
autoHalfDuplex-10M (8),
autoHalfDuplex-100M (9),
autoFullDuplex-10M (10),
autoFullDuplex-100M (11)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows an admin request to configure the port
to either autosense or one of the different speed-duplex
combinations."
::= { atiStkSwPortConfigEntry 6 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This object allows an admin request to configure the port to either autosense or one of the different speed-duplex combinations.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: atiStkSwPortNegotiation
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"atiStkSwPortNegotiation",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"autosense",
"(",
"1",
")",
",",
"forceHalfDuplex-10M",
"(",
"2",
")",
",",
"forceHalfDuplex-100M",
"(",
"3",
")",
",",
"forceHalfDuplex-1G",
"(",
"4",
")",
",",
"forceFullDuplex-10M",
"(",
"5",
")",
",",
"forceFullDuplex-100M",
"(",
"6",
")",
",",
"forceFullDuplex-1G",
"(",
"7",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object allows an admin request to configure the port to either autosense or one of the different speed-duplex combinations.\"",
"::=",
"{",
"atiStkSwPortConfigEntry",
"6",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"autosense",
1
],
[
"forceHalfDuplex-10M",
2
],
[
"forceHalfDuplex-100M",
3
],
[
"forceHalfDuplex-1G",
4
],
[
"forceFullDuplex-10M",
5
],
[
"forceFullDuplex-100M",
6
],
[
"forceFullDuplex-1G",
7
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object allows an admin request to configure the port to either autosense or one of the different speed-duplex combinations."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: AtiEdgeSwitch-MIB
See published definition above
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'MacAddress'], 'SNMPv2-SMI': ['IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Counter64', 'Counter32', 'TimeTicks', 'Gauge32'], 'RFC1155-SMI': ['enterprises']}Related source files and packages:
Vendor MIB copy from the Observium Community archive.
Module: AtiStackSwitch-MIB
See published definition above
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'MacAddress'], 'SNMPv2-SMI': ['IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Counter64', 'Counter32', 'TimeTicks'], 'RFC1155-SMI': ['enterprises']}Related source files and packages:
Vendor MIB copy from the Observium Community archive.
Module: AtiStackSwitch9000-MIB
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'MacAddress'], 'SNMPv2-SMI': ['IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Counter64', 'Counter32', 'TimeTicks'], 'RFC1155-SMI': ['enterprises']}Status in source: current.
Names: atiStkSwPortNegotiation
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"atiStkSwPortNegotiation",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"autosense",
"(",
"1",
")",
",",
"forceHalfDuplex-10M",
"(",
"2",
")",
",",
"forceHalfDuplex-100M",
"(",
"3",
")",
",",
"forceHalfDuplex-1G",
"(",
"4",
")",
",",
"forceFullDuplex-10M",
"(",
"5",
")",
",",
"forceFullDuplex-100M",
"(",
"6",
")",
",",
"forceFullDuplex-1G",
"(",
"7",
")",
",",
"autoHalfDuplex-10M",
"(",
"8",
")",
",",
"autoHalfDuplex-100M",
"(",
"9",
")",
",",
"autoFullDuplex-10M",
"(",
"10",
")",
",",
"autoFullDuplex-100M",
"(",
"11",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object allows an admin request to configure the port to either autosense or one of the different speed-duplex combinations.\"",
"::=",
"{",
"atiStkSwPortConfigEntry",
"6",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"autosense",
1
],
[
"forceHalfDuplex-10M",
2
],
[
"forceHalfDuplex-100M",
3
],
[
"forceHalfDuplex-1G",
4
],
[
"forceFullDuplex-10M",
5
],
[
"forceFullDuplex-100M",
6
],
[
"forceFullDuplex-1G",
7
],
[
"autoHalfDuplex-10M",
8
],
[
"autoHalfDuplex-100M",
9
],
[
"autoFullDuplex-10M",
10
],
[
"autoFullDuplex-100M",
11
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object allows an admin request to configure the port to either autosense or one of the different speed-duplex combinations."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: AtiStackSwitch9424-MIB
See published definition above
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'MacAddress'], 'SNMPv2-SMI': ['IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Counter64', 'Counter32', 'TimeTicks'], 'RFC1155-SMI': ['enterprises']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.207.8.17.2.1.1.1 | atiStkSwModuleId | 0 | 0 | |
| 1.3.6.1.4.1.207.8.17.2.1.1.2 | atiStkSwPortId | 0 | 0 | |
| 1.3.6.1.4.1.207.8.17.2.1.1.3 | atiStkSwPortName | 0 | 0 | |
| 1.3.6.1.4.1.207.8.17.2.1.1.4 | atiStkSwPortState | 0 | 0 | |
| 1.3.6.1.4.1.207.8.17.2.1.1.5 | atiStkSwPortLinkState | 0 | 0 | |
| 1.3.6.1.4.1.207.8.17.2.1.1.7 | atiStkSwPortSpeed | 0 | 0 | |
| 1.3.6.1.4.1.207.8.17.2.1.1.8 | atiStkSwPortDuplexStatus | 0 | 0 | |
| 1.3.6.1.4.1.207.8.17.2.1.1.9 | atiStkSwPortFlowControl | 0 | 0 | |
| 1.3.6.1.4.1.207.8.17.2.1.1.10 | atiStkSwPortBackPressure | 0 | 0 | |
| 1.3.6.1.4.1.207.8.17.2.1.1.11 | atiStkSwPortPriority | 0 | 0 | |
| 1.3.6.1.4.1.207.8.17.2.1.1.12 | atiStkSwPortBroadcastProcessing | 0 | 0 | |
| 1.3.6.1.4.1.207.8.17.2.1.1.13 | atiStkSwPortMDIO | 0 | 0 | |
| 1.3.6.1.4.1.207.8.17.2.1.1.14 | atiStkSwPortHOLLimit | 0 | 0 | |
| 1.3.6.1.4.1.207.8.17.2.1.1.15 | atiStkSwPortBackPressureLimit | 0 | 0 | |
| 1.3.6.1.4.1.207.8.17.2.1.1.16 | atiStkSwPortSTPState | 0 | 0 |