OID reference

currSoftSaveAs

1.3.6.1.4.1.207.8.4.4.4.500.2.1.3

Description

Set with a filename to save the currently running software to the root of the flash. Only one save operation can be executed at a time across all SNMP users. Immediately upon executing the set action the device will indicate that the SNMP set was a success. The actual firmware save operation itself will be started and…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.207.8.4.4.4.500.2.1 (currentFirmware)
Node code
3
Node name
currSoftSaveAs
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.207.8.4.4.4.500.2.1.3
URN notation
urn:oid:1.3.6.1.4.1.207.8.4.4.4.500.2.1.3
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 207 8 4 4 4 500 2 1 3}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) alliedtelesyn(207) mibObject(8) brouterMib(4) atRouter(4) modules(4) setup(500) firmware(2) currentFirmware(1) currSoftSaveAs(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) alliedtelesyn(207) mibObjects(8) brouterMib(4) atRouter(4) modules(4) setup(500) firmware(2) currentFirmware(1) currSoftSaveAs(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) alliedtelesyn(207) mibobjs(8) brouterMib(4) atRouter(4) modules(4) setup(500) firmware(2) currentFirmware(1) currSoftSaveAs(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) ati(207) mibObject(8) brouterMib(4) atRouter(4) modules(4) setup(500) firmware(2) currentFirmware(1) currSoftSaveAs(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) ati(207) mibObjects(8) brouterMib(4) atRouter(4) modules(4) setup(500) firmware(2) currentFirmware(1) currSoftSaveAs(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) ati(207) mibobjs(8) brouterMib(4) atRouter(4) modules(4) setup(500) firmware(2) currentFirmware(1) currSoftSaveAs(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) alliedTelesis(207) mibObject(8) brouterMib(4) atRouter(4) modules(4) setup(500) firmware(2) currentFirmware(1) currSoftSaveAs(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) alliedTelesis(207) mibObjects(8) brouterMib(4) atRouter(4) modules(4) setup(500) firmware(2) currentFirmware(1) currSoftSaveAs(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) alliedTelesis(207) mibobjs(8) brouterMib(4) atRouter(4) modules(4) setup(500) firmware(2) currentFirmware(1) currSoftSaveAs(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) alliedTelesyn(207) mibObject(8) brouterMib(4) atRouter(4) modules(4) setup(500) firmware(2) currentFirmware(1) currSoftSaveAs(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) alliedTelesyn(207) mibObjects(8) brouterMib(4) atRouter(4) modules(4) setup(500) firmware(2) currentFirmware(1) currSoftSaveAs(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) alliedTelesyn(207) mibobjs(8) brouterMib(4) atRouter(4) modules(4) setup(500) firmware(2) currentFirmware(1) currSoftSaveAs(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) alliedtelesyn(207) mibObject(8) brouterMib(4) atRouter(4) modules(4) setup(500) firmware(2) currentFirmware(1) currSoftSaveAs(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) alliedtelesyn(207) mibObjects(8) brouterMib(4) atRouter(4) modules(4) setup(500) firmware(2) currentFirmware(1) currSoftSaveAs(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) alliedtelesyn(207) mibobjs(8) brouterMib(4) atRouter(4) modules(4) setup(500) firmware(2) currentFirmware(1) currSoftSaveAs(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) ati(207) mibObject(8) brouterMib(4) atRouter(4) modules(4) setup(500) firmware(2) currentFirmware(1) currSoftSaveAs(3)}
  • Additional combinations skipped.
OID-IRI notation
  • /1/3/6/1/4/1/207/8/4/4/4/500/2/1/3
  • /ISO/Identified-Organization/6/1/4/1/207/8/4/4/4/500/2/1/3
  • /ISO/3/6/1/4/1/207/8/4/4/4/500/2/1/3
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/alliedtelesyn/mibObject/brouterMib/atRouter/modules/setup/firmware/currentFirmware/currSoftSaveAs
  • /iso/identified-organization/dod/internet/private/enterprise/alliedtelesyn/mibObjects/brouterMib/atRouter/modules/setup/firmware/currentFirmware/currSoftSaveAs
  • /iso/identified-organization/dod/internet/private/enterprise/alliedtelesyn/mibobjs/brouterMib/atRouter/modules/setup/firmware/currentFirmware/currSoftSaveAs
  • /iso/identified-organization/dod/internet/private/enterprise/ati/mibObject/brouterMib/atRouter/modules/setup/firmware/currentFirmware/currSoftSaveAs
  • /iso/identified-organization/dod/internet/private/enterprise/ati/mibObjects/brouterMib/atRouter/modules/setup/firmware/currentFirmware/currSoftSaveAs
  • /iso/identified-organization/dod/internet/private/enterprise/ati/mibobjs/brouterMib/atRouter/modules/setup/firmware/currentFirmware/currSoftSaveAs
  • /iso/identified-organization/dod/internet/private/enterprise/alliedTelesis/mibObject/brouterMib/atRouter/modules/setup/firmware/currentFirmware/currSoftSaveAs
  • /iso/identified-organization/dod/internet/private/enterprise/alliedTelesis/mibObjects/brouterMib/atRouter/modules/setup/firmware/currentFirmware/currSoftSaveAs
  • /iso/identified-organization/dod/internet/private/enterprise/alliedTelesis/mibobjs/brouterMib/atRouter/modules/setup/firmware/currentFirmware/currSoftSaveAs
  • /iso/identified-organization/dod/internet/private/enterprise/alliedTelesyn/mibObject/brouterMib/atRouter/modules/setup/firmware/currentFirmware/currSoftSaveAs
  • /iso/identified-organization/dod/internet/private/enterprise/alliedTelesyn/mibObjects/brouterMib/atRouter/modules/setup/firmware/currentFirmware/currSoftSaveAs
  • /iso/identified-organization/dod/internet/private/enterprise/alliedTelesyn/mibobjs/brouterMib/atRouter/modules/setup/firmware/currentFirmware/currSoftSaveAs
  • /iso/identified-organization/dod/internet/private/enterprises/alliedtelesyn/mibObject/brouterMib/atRouter/modules/setup/firmware/currentFirmware/currSoftSaveAs
  • /iso/identified-organization/dod/internet/private/enterprises/alliedtelesyn/mibObjects/brouterMib/atRouter/modules/setup/firmware/currentFirmware/currSoftSaveAs
  • /iso/identified-organization/dod/internet/private/enterprises/alliedtelesyn/mibobjs/brouterMib/atRouter/modules/setup/firmware/currentFirmware/currSoftSaveAs
  • /iso/identified-organization/dod/internet/private/enterprises/ati/mibObject/brouterMib/atRouter/modules/setup/firmware/currentFirmware/currSoftSaveAs
  • Additional combinations skipped.

SNMP properties

Value type
DisplayString
Maximum access defined by MIB
read-write
Status in MIB
current, deprecated

Definitions may combine these properties differently.

Compare 2 source variants

Variant 1 — Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)

Value type
DisplayString
Maximum access defined by MIB
read-write
Status in MIB
current

Variant 2 — Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community), Netdisco MIB archive copies

Value type
DisplayString
Maximum access defined by MIB
read-write
Status in MIB
deprecated

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Available source records contain 2 distinct definitions; some records may not include a definition.

Show 2 published definitions

currSoftSaveAs · current

currSoftSaveAs OBJECT-TYPE
			SYNTAX DisplayString
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"Set with a filename to save the currently running software to the root 
				of the flash. Only one save operation can be executed at a time across 
				all SNMP users.
				
				Immediately upon executing the set action the device will indicate that 
				the SNMP set was a success. The actual firmware save operation itself 
				will be started and continue on the device until it has completed.
				
				Subsequent reads of the object will return one of several results:
				saving x            A saving operation is currently in progress. You 
				                    cannot start another save while the object is 
				                    returning this value.
				
				x success           The last save operation was successfully completed.
				
				x failure: [error]  The last save operation failed, with the 
				                    descriptive message attached. The most common 
				                    failure is lack of remaining space on the flash.
				
				idle                There is no save operation in progress and a new 
				                    one may be started.
				
				
				Upon reading a success or failure message, the message will be cleared 
				and the next read will result in an 'idle' message. A new save operation 
				can now be executed."
			::= { currentFirmware 3 }

currSoftSaveAs · deprecated

currSoftSaveAs OBJECT-TYPE
            SYNTAX DisplayString
            MAX-ACCESS read-write
            STATUS deprecated
            DESCRIPTION
                "Set with a filename to save the currently running software to
                the root of flash. Only one save operation can be executed at a
                time across all SNMP users, and the filename must not contain
                whitespace characters.

                Immediately upon executing the set action, the actual firmware
                save operation will be started and continue on the device until
                it has completed or a failure occurs.

                Subsequent reads of the object will return one of several
                results:

                saving x            A saving operation is currently in
                                    progress. Another save cannot be started
                                    while the object is returning this value.

                x success           The last save operation was successfully
                                    completed.

                x failure: [error]  The last save operation failed, due to the
                                    descriptive message attached. The most
                                    common failure is lack of disk space.

                idle                There is no save operation in progress and
                                    a new one may be started.

                Upon reading a success or failure message, the message will be
                cleared and the next read will result in an 'idle' message. A
                new save operation can now be executed.

                NOTE: This object has been replaced by objects currSoftSaveToFile,
                currSoftSaveStatus and currSoftLastSaveResult."
            ::= { currentFirmware 3 }

Meaning

Descriptions

2 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Description 1

Set with a filename to save the currently running software to the root of the flash. Only one save operation can be executed at a time across all SNMP users. Immediately upon executing the set action the device will indicate that the SNMP set was a success. The actual firmware save operation itself will be started and continue on the device until it has completed. Subsequent reads of the object will return one of several results: saving x A saving operation is currently in progress. You cannot start another save while the object is returning this value. x success The last save operation was successfully completed. x failure: [error] The last save operation failed, with the descriptive message attached. The most common failure is lack of remaining space on the flash. idle There is no save operation in progress and a new one may be started. Upon reading a success or failure message, the message will be cleared and the next read will result in an 'idle' message. A new save operation can now be executed.

Sources for this description

Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Description 2

Set with a filename to save the currently running software to the root of flash. Only one save operation can be executed at a time across all SNMP users, and the filename must not contain whitespace characters. Immediately upon executing the set action, the actual firmware save operation will be started and continue on the device until it has completed or a failure occurs. Subsequent reads of the object will return one of several results: saving x A saving operation is currently in progress. Another save cannot be started while the object is returning this value. x success The last save operation was successfully completed. x failure: [error] The last save operation failed, due to the descriptive message attached. The most common failure is lack of disk space. idle There is no save operation in progress and a new one may be started. Upon reading a success or failure message, the message will be cleared and the next read will result in an 'idle' message. A new save operation can now be executed. NOTE: This object has been replaced by objects currSoftSaveToFile, currSoftSaveStatus and currSoftLastSaveResult.

Sources for this description

Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copies

See 1 matching source record

Evidence

Source records

2 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 record · 1 source

Description 1

currSoftSaveAs · currentMultiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 source

Status in source: current.

Names: currSoftSaveAs

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "currSoftSaveAs",
    "OBJECT-TYPE",
    "SYNTAX",
    "DisplayString",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"Set with a filename to save the currently running software to the root of the flash. Only one save operation can be executed at a time across all SNMP users. Immediately upon executing the set action the device will indicate that the SNMP set was a success. The actual firmware save operation itself will be started and continue on the device until it has completed. Subsequent reads of the object will return one of several results: saving x A saving operation is currently in progress. You cannot start another save while the object is returning this value. x success The last save operation was successfully completed. x failure: [error] The last save operation failed, with the descriptive message attached. The most common failure is lack of remaining space on the flash. idle There is no save operation in progress and a new one may be started. Upon reading a success or failure message, the message will be cleared and the next read will result in an 'idle' message. A new save operation can now be executed.\"",
    "::=",
    "{",
    "currentFirmware",
    "3",
    "}"
  ],
  "syntax_tree": [
    [
      "row",
      "DisplayString"
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "Set with a filename to save the currently running software to the root of the flash. Only one save operation can be executed at a time across all SNMP users. Immediately upon executing the set action the device will indicate that the SNMP set was a success. The actual firmware save operation itself will be started and continue on the device until it has completed. Subsequent reads of the object will return one of several results: saving x A saving operation is currently in progress. You cannot start another save while the object is returning this value. x success The last save operation was successfully completed. x failure: [error] The last save operation failed, with the descriptive message attached. The most common failure is lack of remaining space on the flash. idle There is no save operation in progress and a new one may be started. Upon reading a success or failure message, the message will be cleared and the next read will result in an 'idle' message. A new save operation can now be executed."
    ],
    null,
    null,
    null,
    null
  ]
}
Records for description 2Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community), Netdisco MIB archive copies1 record · 2 sources

Description 2

currSoftSaveAs · deprecatedMultiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community), Netdisco MIB archive copies2 sources

Status in source: deprecated.

Names: currSoftSaveAs

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "currSoftSaveAs",
    "OBJECT-TYPE",
    "SYNTAX",
    "DisplayString",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "deprecated",
    "DESCRIPTION",
    "\"Set with a filename to save the currently running software to the root of flash. Only one save operation can be executed at a time across all SNMP users, and the filename must not contain whitespace characters. Immediately upon executing the set action, the actual firmware save operation will be started and continue on the device until it has completed or a failure occurs. Subsequent reads of the object will return one of several results: saving x A saving operation is currently in progress. Another save cannot be started while the object is returning this value. x success The last save operation was successfully completed. x failure: [error] The last save operation failed, due to the descriptive message attached. The most common failure is lack of disk space. idle There is no save operation in progress and a new one may be started. Upon reading a success or failure message, the message will be cleared and the next read will result in an 'idle' message. A new save operation can now be executed. NOTE: This object has been replaced by objects currSoftSaveToFile, currSoftSaveStatus and currSoftLastSaveResult.\"",
    "::=",
    "{",
    "currentFirmware",
    "3",
    "}"
  ],
  "syntax_tree": [
    [
      "row",
      "DisplayString"
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "deprecated"
    ],
    [
      "DESCRIPTION",
      "Set with a filename to save the currently running software to the root of flash. Only one save operation can be executed at a time across all SNMP users, and the filename must not contain whitespace characters. Immediately upon executing the set action, the actual firmware save operation will be started and continue on the device until it has completed or a failure occurs. Subsequent reads of the object will return one of several results: saving x A saving operation is currently in progress. Another save cannot be started while the object is returning this value. x success The last save operation was successfully completed. x failure: [error] The last save operation failed, due to the descriptive message attached. The most common failure is lack of disk space. idle There is no save operation in progress and a new one may be started. Upon reading a success or failure message, the message will be cleared and the next read will result in an 'idle' message. A new save operation can now be executed. NOTE: This object has been replaced by objects currSoftSaveToFile, currSoftSaveStatus and currSoftLastSaveResult."
    ],
    null,
    null,
    null,
    null
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.207)

Scott Holley

Siblings (5)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.207.8.4.4.4.500.2.1.1 currSoftVersion00
1.3.6.1.4.1.207.8.4.4.4.500.2.1.2 currSoftName00
1.3.6.1.4.1.207.8.4.4.4.500.2.1.4 currSoftSaveToFile00
1.3.6.1.4.1.207.8.4.4.4.500.2.1.5 currSoftSaveStatus00
1.3.6.1.4.1.207.8.4.4.4.500.2.1.6 currSoftLastSaveResult00