OID reference

fsMplsTunnelEndToEndProtection

1.3.6.1.4.1.2076.13.12.1.2.1.8

Description

This bitmask indicates the level of end to end protection required. A value of zero (no bits set) indicates that any protection may be used. The following describes these bitfields: unprotected This flag is set to indicate that the LSP should not use any protection. fullReroute This flag is set to indicate that the pr…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.2076.13.12.1.2.1 (fsMplsTunnelEntry)
Node code
8
Node name
fsMplsTunnelEndToEndProtection
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.2076.13.12.1.2.1.8
URN notation
urn:oid:1.3.6.1.4.1.2076.13.12.1.2.1.8
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 2076 13 12 1 2 1 8}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 2076 13 fsMplsTeMIB(12) fsMplsTeObjects(1) fsMplsTunnelTable(2) fsMplsTunnelEntry(1) fsMplsTunnelEndToEndProtection(8)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) 2076 13 fsMplsTeMIB(12) fsMplsTeObjects(1) fsMplsTunnelTable(2) fsMplsTunnelEntry(1) fsMplsTunnelEndToEndProtection(8)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) 2076 13 fsMplsTeMIB(12) fsMplsTeObjects(1) fsMplsTunnelTable(2) fsMplsTunnelEntry(1) fsMplsTunnelEndToEndProtection(8)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) 2076 13 fsMplsTeMIB(12) fsMplsTeObjects(1) fsMplsTunnelTable(2) fsMplsTunnelEntry(1) fsMplsTunnelEndToEndProtection(8)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) 2076 13 fsMplsTeMIB(12) fsMplsTeObjects(1) fsMplsTunnelTable(2) fsMplsTunnelEntry(1) fsMplsTunnelEndToEndProtection(8)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) 2076 13 fsMplsTeMIB(12) fsMplsTeObjects(1) fsMplsTunnelTable(2) fsMplsTunnelEntry(1) fsMplsTunnelEndToEndProtection(8)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) 2076 13 fsMplsTeMIB(12) fsMplsTeObjects(1) fsMplsTunnelTable(2) fsMplsTunnelEntry(1) fsMplsTunnelEndToEndProtection(8)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) 2076 13 fsMplsTeMIB(12) fsMplsTeObjects(1) fsMplsTunnelTable(2) fsMplsTunnelEntry(1) fsMplsTunnelEndToEndProtection(8)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 2076 13 fsMplsTeMIB(12) fsMplsTeObjects(1) fsMplsTunnelTable(2) fsMplsTunnelEntry(1) fsMplsTunnelEndToEndProtection(8)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) 2076 13 fsMplsTeMIB(12) fsMplsTeObjects(1) fsMplsTunnelTable(2) fsMplsTunnelEntry(1) fsMplsTunnelEndToEndProtection(8)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) 2076 13 fsMplsTeMIB(12) fsMplsTeObjects(1) fsMplsTunnelTable(2) fsMplsTunnelEntry(1) fsMplsTunnelEndToEndProtection(8)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) 2076 13 fsMplsTeMIB(12) fsMplsTeObjects(1) fsMplsTunnelTable(2) fsMplsTunnelEntry(1) fsMplsTunnelEndToEndProtection(8)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprise(1) 2076 13 fsMplsTeMIB(12) fsMplsTeObjects(1) fsMplsTunnelTable(2) fsMplsTunnelEntry(1) fsMplsTunnelEndToEndProtection(8)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprises(1) 2076 13 fsMplsTeMIB(12) fsMplsTeObjects(1) fsMplsTunnelTable(2) fsMplsTunnelEntry(1) fsMplsTunnelEndToEndProtection(8)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) 2076 13 fsMplsTeMIB(12) fsMplsTeObjects(1) fsMplsTunnelTable(2) fsMplsTunnelEntry(1) fsMplsTunnelEndToEndProtection(8)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) vendor-objects(1) 2076 13 fsMplsTeMIB(12) fsMplsTeObjects(1) fsMplsTunnelTable(2) fsMplsTunnelEntry(1) fsMplsTunnelEndToEndProtection(8)}
OID-IRI notation
  • /1/3/6/1/4/1/2076/13/12/1/2/1/8
  • /ISO/Identified-Organization/6/1/4/1/2076/13/12/1/2/1/8
  • /ISO/3/6/1/4/1/2076/13/12/1/2/1/8
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/2076/13/fsMplsTeMIB/fsMplsTeObjects/fsMplsTunnelTable/fsMplsTunnelEntry/fsMplsTunnelEndToEndProtection
  • /iso/identified-organization/dod/internet/private/enterprises/2076/13/fsMplsTeMIB/fsMplsTeObjects/fsMplsTunnelTable/fsMplsTunnelEntry/fsMplsTunnelEndToEndProtection
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/2076/13/fsMplsTeMIB/fsMplsTeObjects/fsMplsTunnelTable/fsMplsTunnelEntry/fsMplsTunnelEndToEndProtection
  • /iso/identified-organization/dod/internet/private/vendor-objects/2076/13/fsMplsTeMIB/fsMplsTeObjects/fsMplsTunnelTable/fsMplsTunnelEntry/fsMplsTunnelEndToEndProtection
  • /iso/org/dod/internet/private/enterprise/2076/13/fsMplsTeMIB/fsMplsTeObjects/fsMplsTunnelTable/fsMplsTunnelEntry/fsMplsTunnelEndToEndProtection
  • /iso/org/dod/internet/private/enterprises/2076/13/fsMplsTeMIB/fsMplsTeObjects/fsMplsTunnelTable/fsMplsTunnelEntry/fsMplsTunnelEndToEndProtection
  • /iso/org/dod/internet/private/ldap-enterprise/2076/13/fsMplsTeMIB/fsMplsTeObjects/fsMplsTunnelTable/fsMplsTunnelEntry/fsMplsTunnelEndToEndProtection
  • /iso/org/dod/internet/private/vendor-objects/2076/13/fsMplsTeMIB/fsMplsTeObjects/fsMplsTunnelTable/fsMplsTunnelEntry/fsMplsTunnelEndToEndProtection
  • /iso/iso-identified-organization/dod/internet/private/enterprise/2076/13/fsMplsTeMIB/fsMplsTeObjects/fsMplsTunnelTable/fsMplsTunnelEntry/fsMplsTunnelEndToEndProtection
  • /iso/iso-identified-organization/dod/internet/private/enterprises/2076/13/fsMplsTeMIB/fsMplsTeObjects/fsMplsTunnelTable/fsMplsTunnelEntry/fsMplsTunnelEndToEndProtection
  • /iso/iso-identified-organization/dod/internet/private/ldap-enterprise/2076/13/fsMplsTeMIB/fsMplsTeObjects/fsMplsTunnelTable/fsMplsTunnelEntry/fsMplsTunnelEndToEndProtection
  • /iso/iso-identified-organization/dod/internet/private/vendor-objects/2076/13/fsMplsTeMIB/fsMplsTeObjects/fsMplsTunnelTable/fsMplsTunnelEntry/fsMplsTunnelEndToEndProtection
  • /iso/iso-organization/dod/internet/private/enterprise/2076/13/fsMplsTeMIB/fsMplsTeObjects/fsMplsTunnelTable/fsMplsTunnelEntry/fsMplsTunnelEndToEndProtection
  • /iso/iso-organization/dod/internet/private/enterprises/2076/13/fsMplsTeMIB/fsMplsTeObjects/fsMplsTunnelTable/fsMplsTunnelEntry/fsMplsTunnelEndToEndProtection
  • /iso/iso-organization/dod/internet/private/ldap-enterprise/2076/13/fsMplsTeMIB/fsMplsTeObjects/fsMplsTunnelTable/fsMplsTunnelEntry/fsMplsTunnelEndToEndProtection
  • /iso/iso-organization/dod/internet/private/vendor-objects/2076/13/fsMplsTeMIB/fsMplsTeObjects/fsMplsTunnelTable/fsMplsTunnelEntry/fsMplsTunnelEndToEndProtection

SNMP properties

Value type
BITS
Maximum access defined by MIB
read-create
Status in MIB
current
Default value
unprotected

Bit values

Bit positionName
0unprotected
1fullReroute
2rerouteWithoutExtraTraffic
3dedicatedOneToOne
4dedicatedUniOnePlusOne
5dedicatedBiOnePlusOne

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.

Published AUGMENTS row: mplsTunnelEntry. Check that row's index definition for the instance suffix.

snmpwalk [connection options] DEVICE .1.3.6.1.4.1.2076.13.12.1.2.1.8

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

The displayed source records contain one distinct definition. Compare its source records.

fsMplsTunnelEndToEndProtection OBJECT-TYPE
  SYNTAX  BITS {
    unprotected(0),
    fullReroute(1),
    rerouteWithoutExtraTraffic(2),
    dedicatedOneToOne(3),
    dedicatedUniOnePlusOne(4),
    dedicatedBiOnePlusOne(5)
  }
  MAX-ACCESS read-create
  STATUS  current
  DESCRIPTION
    "This bitmask indicates the level of end to end protection required.  A
     value of zero (no bits set) indicates that any protection may be
     used.  The following describes these bitfields:

     unprotected
       This flag is set to indicate that the LSP should not use any
        protection.

     fullReroute
       This flag is set to indicate that the protecting LSP creation
       only when protected (primary) LSP fails.

     rerouteWitoutExtraTraffic
       This flag is set to indicate that protecting LSP shall not
       carry traffic other than that of Primary LSP. In this case
       protecting LSP is usually not configured in the data plane
       before protected LSP failure.

     dedicatedOneToOne
       This flag is set to indicate that a dedicated LSP
       protection scheme, i.e., 1:1 protection, should be used to
       support the LSP.

     dedicatedUniOnePlusOne
       This flag is set to indicate that a dedicated LSP
       protection scheme, i.e., 1+1 protection, should be used to
       support the LSP. It is used for protecting uni-directional
       tunnel and No additional signalling is required for switching
       from one LSP to another in case of failure and recovery

     dedicatedBiOnePlusOne
       This flag is set to indicate that a dedicated LSP
       protection scheme, i.e., 1+1 protection, should be used to
       support the LSP. It is used for protecting bi-directional
       tunnel and additional signalling is required for switching
       from one LSP to another in case of failure and recovery."

  REFERENCE
     "Section 1, RFC 4872, RSVP-TE Extensions in Support of End-to-End
      Generalized Multi-Protocol Label Switching (GMPLS) Recovery,
      J.P. Lang, Ed.Sonos, Y.Rekhter, Ed.Juniper, D.Papadimitriou, Ed.Alcatel,
      May 2007."
  DEFVAL  { unprotected }
::= { fsMplsTunnelEntry 8 }

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

This bitmask indicates the level of end to end protection required. A value of zero (no bits set) indicates that any protection may be used. The following describes these bitfields: unprotected This flag is set to indicate that the LSP should not use any protection. fullReroute This flag is set to indicate that the protecting LSP creation only when protected (primary) LSP fails. rerouteWitoutExtraTraffic This flag is set to indicate that protecting LSP shall not carry traffic other than that of Primary LSP. In this case protecting LSP is usually not configured in the data plane before protected LSP failure. dedicatedOneToOne This flag is set to indicate that a dedicated LSP protection scheme, i.e., 1:1 protection, should be used to support the LSP. dedicatedUniOnePlusOne This flag is set to indicate that a dedicated LSP protection scheme, i.e., 1+1 protection, should be used to support the LSP. It is used for protecting uni-directional tunnel and No additional signalling is required for switching from one LSP to another in case of failure and recovery dedicatedBiOnePlusOne This flag is set to indicate that a dedicated LSP protection scheme, i.e., 1+1 protection, should be used to support the LSP. It is used for protecting bi-directional tunnel and additional signalling is required for switching from one LSP to another in case of failure and recovery.

Sources for this description

Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 record · 1 source

Description 1

fsMplsTunnelEndToEndProtection · currentMultiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 source

Status in source: current.

Names: fsMplsTunnelEndToEndProtection

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "fsMplsTunnelEndToEndProtection",
    "OBJECT-TYPE",
    "SYNTAX",
    "BITS",
    "{",
    "unprotected",
    "(",
    "0",
    ")",
    ",",
    "fullReroute",
    "(",
    "1",
    ")",
    ",",
    "rerouteWithoutExtraTraffic",
    "(",
    "2",
    ")",
    ",",
    "dedicatedOneToOne",
    "(",
    "3",
    ")",
    ",",
    "dedicatedUniOnePlusOne",
    "(",
    "4",
    ")",
    ",",
    "dedicatedBiOnePlusOne",
    "(",
    "5",
    ")",
    "}",
    "MAX-ACCESS",
    "read-create",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"This bitmask indicates the level of end to end protection required. A value of zero (no bits set) indicates that any protection may be used. The following describes these bitfields: unprotected This flag is set to indicate that the LSP should not use any protection. fullReroute This flag is set to indicate that the protecting LSP creation only when protected (primary) LSP fails. rerouteWitoutExtraTraffic This flag is set to indicate that protecting LSP shall not carry traffic other than that of Primary LSP. In this case protecting LSP is usually not configured in the data plane before protected LSP failure. dedicatedOneToOne This flag is set to indicate that a dedicated LSP protection scheme, i.e., 1:1 protection, should be used to support the LSP. dedicatedUniOnePlusOne This flag is set to indicate that a dedicated LSP protection scheme, i.e., 1+1 protection, should be used to support the LSP. It is used for protecting uni-directional tunnel and No additional signalling is required for switching from one LSP to another in case of failure and recovery dedicatedBiOnePlusOne This flag is set to indicate that a dedicated LSP protection scheme, i.e., 1+1 protection, should be used to support the LSP. It is used for protecting bi-directional tunnel and additional signalling is required for switching from one LSP to another in case of failure and recovery.\"",
    "REFERENCE",
    "\"Section 1, RFC 4872, RSVP-TE Extensions in Support of End-to-End Generalized Multi-Protocol Label Switching (GMPLS) Recovery, J.P. Lang, Ed.Sonos, Y.Rekhter, Ed.Juniper, D.Papadimitriou, Ed.Alcatel, May 2007.\"",
    "DEFVAL",
    "{",
    "unprotected",
    "}",
    "::=",
    "{",
    "fsMplsTunnelEntry",
    "8",
    "}"
  ],
  "syntax_tree": [
    [
      "BITS",
      [
        [
          "unprotected",
          0
        ],
        [
          "fullReroute",
          1
        ],
        [
          "rerouteWithoutExtraTraffic",
          2
        ],
        [
          "dedicatedOneToOne",
          3
        ],
        [
          "dedicatedUniOnePlusOne",
          4
        ],
        [
          "dedicatedBiOnePlusOne",
          5
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-create"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This bitmask indicates the level of end to end protection required. A value of zero (no bits set) indicates that any protection may be used. The following describes these bitfields: unprotected This flag is set to indicate that the LSP should not use any protection. fullReroute This flag is set to indicate that the protecting LSP creation only when protected (primary) LSP fails. rerouteWitoutExtraTraffic This flag is set to indicate that protecting LSP shall not carry traffic other than that of Primary LSP. In this case protecting LSP is usually not configured in the data plane before protected LSP failure. dedicatedOneToOne This flag is set to indicate that a dedicated LSP protection scheme, i.e., 1:1 protection, should be used to support the LSP. dedicatedUniOnePlusOne This flag is set to indicate that a dedicated LSP protection scheme, i.e., 1+1 protection, should be used to support the LSP. It is used for protecting uni-directional tunnel and No additional signalling is required for switching from one LSP to another in case of failure and recovery dedicatedBiOnePlusOne This flag is set to indicate that a dedicated LSP protection scheme, i.e., 1+1 protection, should be used to support the LSP. It is used for protecting bi-directional tunnel and additional signalling is required for switching from one LSP to another in case of failure and recovery."
    ],
    [
      "REFERENCE",
      "Section 1, RFC 4872, RSVP-TE Extensions in Support of End-to-End Generalized Multi-Protocol Label Switching (GMPLS) Recovery, J.P. Lang, Ed.Sonos, Y.Rekhter, Ed.Juniper, D.Papadimitriou, Ed.Alcatel, May 2007."
    ],
    null,
    null,
    [
      "DEFVAL",
      "unprotected"
    ]
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.2076)

Division Products

Siblings (20)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.2076.13.12.1.2.1.1 fsMplsTunnelType00
1.3.6.1.4.1.2076.13.12.1.2.1.2 fsMplsTunnelLSRIdMapInfo00
1.3.6.1.4.1.2076.13.12.1.2.1.3 fsMplsTunnelMode00
1.3.6.1.4.1.2076.13.12.1.2.1.4 fsMplsTunnelProactiveSessIndex00
1.3.6.1.4.1.2076.13.12.1.2.1.5 fsMplsTunnelMBBStatus00
1.3.6.1.4.1.2076.13.12.1.2.1.6 fsMplsTunnelDisJointType00
1.3.6.1.4.1.2076.13.12.1.2.1.7 fsMplsTunnelAttPointer00
1.3.6.1.4.1.2076.13.12.1.2.1.9 fsMplsTunnelPrConfigOperType00
1.3.6.1.4.1.2076.13.12.1.2.1.10 fsMplsTunnelSrlgType00
1.3.6.1.4.1.2076.13.12.1.2.1.11 fsMplsTunnelIfIndex00
1.3.6.1.4.1.2076.13.12.1.2.1.12 fsMplsTunnelInitReOptimize00
1.3.6.1.4.1.2076.13.12.1.2.1.13 fsMplsTunnelIsProtectingLsp00
1.3.6.1.4.1.2076.13.12.1.2.1.14 fsMplsLspTunnelMapIndex00
1.3.6.1.4.1.2076.13.12.1.2.1.15 fsMplsLspTunnelMapInstance00
1.3.6.1.4.1.2076.13.12.1.2.1.16 fsMplsLspTunnelMapIngressLSRId00
1.3.6.1.4.1.2076.13.12.1.2.1.17 fsMplsLspTunnelMapEgressLSRId00
1.3.6.1.4.1.2076.13.12.1.2.1.18 fsMplsTunnelSynchronizationStatus00
1.3.6.1.4.1.2076.13.12.1.2.1.19 fsMplsTunnelOutPathMsgId00
1.3.6.1.4.1.2076.13.12.1.2.1.20 fsMplsTunnelBackupHopTableIndex00
1.3.6.1.4.1.2076.13.12.1.2.1.21 fsMplsTunnelBackupPathInUse00