Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"fsLaPortChannelDLAGPeriodicSyncTime",
"OBJECT-TYPE",
"SYNTAX",
"Unsigned32",
"(",
"0",
".",
".",
"90000",
")",
"UNITS",
[
"literal",
"226d696c6c697365636f6e647322"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object is used to configure the D-LAG periodic sync timer used in distributed link aggregation. Periodic sync timer is used to configure the transmission interval of D-LAG periodic-sync PDUs. Periodic-sync timer will be running individually in each D-LAG node. if this object is configured with a value of '0', then no periodic-sync messages will be sent from that D-LAG node. The configured value of this timer is applicable only from the next start/re-start of the timer. Value of this object should be same in all D-LAG nodes, configuring this object to different values across the D-LAG nodes of the same D-LAG may result in deletion of maintained neighbor node information because of keep alive mechanism and when D-LAG redundancy feature is enabled, then repeated toggling of role played by D-LAG nodes may be observed. The periodic sync timer has a period from 0 to 90 seconds, configurable in units of 1 ms. For example, to configure periodic sync timer as 6 seconds, configure the value as 6000. Default periodic sync timer value is 1 second.\"",
"DEFVAL",
"{",
"1000",
"}",
"::=",
"{",
"fsLaPortChannelEntry",
"15",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Unsigned32",
[
"integerSubType",
[
[
0,
90000
]
]
]
],
[
"UNITS",
"milliseconds"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object is used to configure the D-LAG periodic sync timer used in distributed link aggregation. Periodic sync timer is used to configure the transmission interval of D-LAG periodic-sync PDUs. Periodic-sync timer will be running individually in each D-LAG node. if this object is configured with a value of '0', then no periodic-sync messages will be sent from that D-LAG node. The configured value of this timer is applicable only from the next start/re-start of the timer. Value of this object should be same in all D-LAG nodes, configuring this object to different values across the D-LAG nodes of the same D-LAG may result in deletion of maintained neighbor node information because of keep alive mechanism and when D-LAG redundancy feature is enabled, then repeated toggling of role played by D-LAG nodes may be observed. The periodic sync timer has a period from 0 to 90 seconds, configurable in units of 1 ms. For example, to configure periodic sync timer as 6 seconds, configure the value as 6000. Default periodic sync timer value is 1 second."
],
null,
null,
null,
[
"DEFVAL",
1000
]
]
}