OID reference

rcPortAutoNegAd

1.3.6.1.4.1.2272.1.4.10.1.1.62

Description

This object is used to specify the port speed and duplex abilities to be advertised during link negotiation. bit 0 - 10 half duplex advertised bit 1 - 10 full duplex advertised bit 2 - 100 half duplex advertised bit 3 - 100 full duplex advertised bit 4 - 1000 half duplex advertised bit 5 - 1000 full duplex advertised …

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.2272.1.4.10.1.1 (rcPortEntry)
Node code
62
Node name
rcPortAutoNegAd
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.2272.1.4.10.1.1.62
URN notation
urn:oid:1.3.6.1.4.1.2272.1.4.10.1.1.62
Type
OBJECT-TYPE
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 2272 1 4 10 1 1 62}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) rapidCity(2272) rcMgmt(1) rcChassis(4) rcPort(10) rcPortTable(1) rcPortEntry(1) rcPortAutoNegAd(62)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) rapidCity(2272) rapidcityfoo(1) rcChassis(4) rcPort(10) rcPortTable(1) rcPortEntry(1) rcPortAutoNegAd(62)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) rapidcity(2272) rcMgmt(1) rcChassis(4) rcPort(10) rcPortTable(1) rcPortEntry(1) rcPortAutoNegAd(62)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) rapidcity(2272) rapidcityfoo(1) rcChassis(4) rcPort(10) rcPortTable(1) rcPortEntry(1) rcPortAutoNegAd(62)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) rapidCity(2272) rcMgmt(1) rcChassis(4) rcPort(10) rcPortTable(1) rcPortEntry(1) rcPortAutoNegAd(62)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) rapidCity(2272) rapidcityfoo(1) rcChassis(4) rcPort(10) rcPortTable(1) rcPortEntry(1) rcPortAutoNegAd(62)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) rapidcity(2272) rcMgmt(1) rcChassis(4) rcPort(10) rcPortTable(1) rcPortEntry(1) rcPortAutoNegAd(62)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) rapidcity(2272) rapidcityfoo(1) rcChassis(4) rcPort(10) rcPortTable(1) rcPortEntry(1) rcPortAutoNegAd(62)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) rapidCity(2272) rcMgmt(1) rcChassis(4) rcPort(10) rcPortTable(1) rcPortEntry(1) rcPortAutoNegAd(62)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) rapidCity(2272) rapidcityfoo(1) rcChassis(4) rcPort(10) rcPortTable(1) rcPortEntry(1) rcPortAutoNegAd(62)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) rapidcity(2272) rcMgmt(1) rcChassis(4) rcPort(10) rcPortTable(1) rcPortEntry(1) rcPortAutoNegAd(62)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) rapidcity(2272) rapidcityfoo(1) rcChassis(4) rcPort(10) rcPortTable(1) rcPortEntry(1) rcPortAutoNegAd(62)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) rapidCity(2272) rcMgmt(1) rcChassis(4) rcPort(10) rcPortTable(1) rcPortEntry(1) rcPortAutoNegAd(62)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) rapidCity(2272) rapidcityfoo(1) rcChassis(4) rcPort(10) rcPortTable(1) rcPortEntry(1) rcPortAutoNegAd(62)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) rapidcity(2272) rcMgmt(1) rcChassis(4) rcPort(10) rcPortTable(1) rcPortEntry(1) rcPortAutoNegAd(62)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) rapidcity(2272) rapidcityfoo(1) rcChassis(4) rcPort(10) rcPortTable(1) rcPortEntry(1) rcPortAutoNegAd(62)}
  • Additional combinations skipped.
OID-IRI notation
  • /1/3/6/1/4/1/2272/1/4/10/1/1/62
  • /ISO/Identified-Organization/6/1/4/1/2272/1/4/10/1/1/62
  • /ISO/3/6/1/4/1/2272/1/4/10/1/1/62
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/rapidCity/rcMgmt/rcChassis/rcPort/rcPortTable/rcPortEntry/rcPortAutoNegAd
  • /iso/identified-organization/dod/internet/private/enterprise/rapidCity/rapidcityfoo/rcChassis/rcPort/rcPortTable/rcPortEntry/rcPortAutoNegAd
  • /iso/identified-organization/dod/internet/private/enterprise/rapidcity/rcMgmt/rcChassis/rcPort/rcPortTable/rcPortEntry/rcPortAutoNegAd
  • /iso/identified-organization/dod/internet/private/enterprise/rapidcity/rapidcityfoo/rcChassis/rcPort/rcPortTable/rcPortEntry/rcPortAutoNegAd
  • /iso/identified-organization/dod/internet/private/enterprises/rapidCity/rcMgmt/rcChassis/rcPort/rcPortTable/rcPortEntry/rcPortAutoNegAd
  • /iso/identified-organization/dod/internet/private/enterprises/rapidCity/rapidcityfoo/rcChassis/rcPort/rcPortTable/rcPortEntry/rcPortAutoNegAd
  • /iso/identified-organization/dod/internet/private/enterprises/rapidcity/rcMgmt/rcChassis/rcPort/rcPortTable/rcPortEntry/rcPortAutoNegAd
  • /iso/identified-organization/dod/internet/private/enterprises/rapidcity/rapidcityfoo/rcChassis/rcPort/rcPortTable/rcPortEntry/rcPortAutoNegAd
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/rapidCity/rcMgmt/rcChassis/rcPort/rcPortTable/rcPortEntry/rcPortAutoNegAd
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/rapidCity/rapidcityfoo/rcChassis/rcPort/rcPortTable/rcPortEntry/rcPortAutoNegAd
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/rapidcity/rcMgmt/rcChassis/rcPort/rcPortTable/rcPortEntry/rcPortAutoNegAd
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/rapidcity/rapidcityfoo/rcChassis/rcPort/rcPortTable/rcPortEntry/rcPortAutoNegAd
  • /iso/identified-organization/dod/internet/private/vendor-objects/rapidCity/rcMgmt/rcChassis/rcPort/rcPortTable/rcPortEntry/rcPortAutoNegAd
  • /iso/identified-organization/dod/internet/private/vendor-objects/rapidCity/rapidcityfoo/rcChassis/rcPort/rcPortTable/rcPortEntry/rcPortAutoNegAd
  • /iso/identified-organization/dod/internet/private/vendor-objects/rapidcity/rcMgmt/rcChassis/rcPort/rcPortTable/rcPortEntry/rcPortAutoNegAd
  • /iso/identified-organization/dod/internet/private/vendor-objects/rapidcity/rapidcityfoo/rcChassis/rcPort/rcPortTable/rcPortEntry/rcPortAutoNegAd
  • Additional combinations skipped.

SNMP properties

Value type
BITS
Maximum access defined by MIB
read-write
Status in MIB
current

Definitions may combine these properties differently.

Compare 5 source variants

Variant 1 — Nortel MIB copies (LibreNMS/Observium Community)

Value type
BITS
Maximum access defined by MIB
read-write
Status in MIB
current

Variant 2 — MIBdepot

Value type
BITS
Maximum access defined by MIB
read-write
Status in MIB
current

Variant 3 — Nortel MIB copies (LibreNMS/Observium Community)

Value type
BITS
Maximum access defined by MIB
read-write
Status in MIB
current

Variant 4 — Nortel MIB copies (LibreNMS/Observium Community), Netdisco MIB archive copies

Value type
BITS
Maximum access defined by MIB
read-write
Status in MIB
current

Variant 5 — MIBdepot

Value type
BITS
Maximum access defined by MIB
read-write
Status in MIB
current

Bit values

Numbers refer to source variants above. “All” covers variants that define bit values: 1, 2, 3, 4, 5. Notes below names come from selected MIB definitions.

Bit positionName and source notesSource variants
0advertise10HalfAll
1advertise10FullAll
2advertise100HalfAll
3advertise100FullAll
4advertise1000HalfAll except 1
5advertise1000FullAll
6advertiseMacPause
Not supported in 8600
All
7advertiseAsymPause
Not supported in 8600
All
8advertiseNoneAll except 2
9advertise10000Full3, 4
10default3, 4
11advertise2500Full3
12advertise5000Full3

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.

Published row index: rcPortIndex.

snmpwalk [connection options] DEVICE .1.3.6.1.4.1.2272.1.4.10.1.1.62

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Available source records contain 5 distinct definitions; some records may not include a definition.

Show 5 published definitions

rcPortAutoNegAd · current

rcPortAutoNegAd OBJECT-TYPE
      SYNTAX       BITS {
                      advertise10Half(0),
                      advertise10Full(1),
                      advertise100Half(2),
                      advertise100Full(3),
                      advertise1000Full(5),
		      advertiseMacPause(6),  -- Not supported in 8600
		      advertiseAsymPause(7), -- Not supported in 8600	
                      advertiseNone(8)
                   }
      MAX-ACCESS   read-write
      STATUS       current
      DESCRIPTION  "This object is used to specify the port speed
                    and duplex abilities to be advertised during
                    link negotiation.

                    bit 0 - 10 half duplex advertised
                    bit 1 - 10 full duplex advertised
                    bit 2 - 100 half duplex advertised
                    bit 3 - 100 full duplex advertised
                    bit 5 - 1000 full duplex advertised
		    bit 6 - Mac PAUSE frame support advertised
		    bit 7 - Asymmetric PAUSE frame support advertised
                    bit 8 - No advertisements

                    The abilities specified in this object are only used
                    when auto-negotiation is enabled on the port.  If all
                    bits in this object are disabled, and auto-negotiation
                    is enabled on the port, then the physical link process
                    on the port will be disabled (if hardware supports
                    this ability).

                    Any change in the value of this bit map will force the
                    PHY to restart the auto-negotiation process.  This will
                    have the same effect as physically unplugging and
                    reattaching the cable plant attached to this port.

		   The capabilities being advertised are either all the 
                   capabilities supported by the hardware or the user- 
		   configured capabilities which is a subset of all the 
		   capability supported by hardware.
          
                   The default value for this object will be all the 
		   capabilities supported by the hardware.

		   Note that bit 6 and bit 7 are currently not supported
		   in ERS8600."
      ::= { rcPortEntry 62 }

rcPortAutoNegAd · current

rcPortAutoNegAd OBJECT-TYPE
      SYNTAX       BITS {
                      advertise10Half(0),
                      advertise10Full(1),
                      advertise100Half(2),
                      advertise100Full(3),
                      advertise1000Half(4),
                      advertise1000Full(5),
                      advertiseMacPause(6),
                      advertiseAsymPause(7)
                   }
      MAX-ACCESS   read-write
      STATUS       current
      DESCRIPTION  "This object is used to specify the port speed
                    and duplex abilities to be advertised during
                    link negotiation.
 
                    bit 0 - 10 half duplex advertised
                    bit 1 - 10 full duplex advertised
                    bit 2 - 100 half duplex advertised
                    bit 3 - 100 full duplex advertised
                    bit 4 - 1000 half duplex advertised
                    bit 5 - 1000 full duplex advertised
                    bit 6 - Mac PAUSE frame support advertised
                    bit 7 - Asymmetric PAUSE frame support advertised
 
                    The abilities specified in this object are only used
                    when auto-negotiation is enabled on the port.  If all
                    bits in this object are disabled, and auto-negotiation
                    is enabled on the port, then the physical link process
                    on the port will be disabled (if hardware supports 
                    this ability).
 
                    Any change in the value of this bit map will force the
                    PHY to restart the auto-negotiation process.  This will
                    have the same effect as physically unplugging and
                    reattaching the cable plant attached to this port.
 
                    Only capabilities present in the hardware as indicated
                    by rcPortAutoNegAdCapability can be advertised.
 
                    The default value for this object will be the value
                    of the associated instance of rcPortAutoNegAdCapability."
      ::= { rcPortEntry 62 }

rcPortAutoNegAd · current

rcPortAutoNegAd OBJECT-TYPE
        SYNTAX          BITS {
                            advertise10Half(0),
                            advertise10Full(1),
                            advertise100Half(2),
                            advertise100Full(3),
                            advertise1000Half(4),
                            advertise1000Full(5),
                            advertiseMacPause(6),  -- Not supported in 8600
                            advertiseAsymPause(7), -- Not supported in 8600
                            advertiseNone(8),
			    advertise10000Full(9),
			    default(10),
			    advertise2500Full(11),
			    advertise5000Full(12)

                        }
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION     "This object is used to specify the port speed
                         and duplex abilities to be advertised during
                         link negotiation.

                         bit 0 - 10 half duplex advertised
                         bit 1 - 10 full duplex advertised
                         bit 2 - 100 half duplex advertised
                         bit 3 - 100 full duplex advertised
                         bit 4 - 1000 half duplex advertised
                         bit 5 - 1000 full duplex advertised
                         bit 6 - Mac PAUSE frame support advertised
                         bit 7 - Asymmetric PAUSE frame support advertised
			 bit 8 - No advertisements
			 bit 9 - 10G full duplex advertisement
			 bit 10 - Set advertise to default setting based on the
		                  hardware capability.
			     
                         The abilities specified in this object are only used
                         when auto-negotiation is enabled on the port.  If all
                         bits in this object are disabled, and auto-negotiation
                         is enabled on the port, then the physical link process
                         on the port will be disabled (if hardware supports
                         this ability).

                         Any change in the value of this bit map will force the
                         PHY to restart the auto-negotiation process.  This will
                         have the same effect as physically unplugging and
                         reattaching the cable plant attached to this port.

                         The capabilities being advertised are either all the
			 capabilities supported by the hardware or the user-
			 configured capabilities which is a subset of all the
			 capability supported by hardware.

			 The default value for this object will be all the
			 capabilities supported by the hardware. Bit 10, default
			 allowed user to set advertise to default. 'default' will take
			 precedence if 'default' bit is combined with other bits. 

			 Note that bit 6 and bit 7 are currently not supported
			 in ERS8600."
        ::= { rcPortEntry 62 }

rcPortAutoNegAd · current

rcPortAutoNegAd OBJECT-TYPE
      SYNTAX       BITS {
                      advertise10Half(0),
                      advertise10Full(1),
                      advertise100Half(2),
                      advertise100Full(3),
                      advertise1000Half(4),
                      advertise1000Full(5),
		      advertiseMacPause(6),  -- Not supported in 8600
		      advertiseAsymPause(7), -- Not supported in 8600
                      advertiseNone(8),
		      advertise10000Full(9),
                      default(10),
                      advertise2500Full(11),
                      advertise5000Full(12)
                   }
      MAX-ACCESS   read-write
      STATUS       current
      DESCRIPTION  "This object is used to specify the port speed
                    and duplex abilities to be advertised during
                    link negotiation.

                    bit 0 - 10 half duplex advertised
                    bit 1 - 10 full duplex advertised
                    bit 2 - 100 half duplex advertised
                    bit 3 - 100 full duplex advertised
                    bit 4 - 1000 half duplex advertised
                    bit 5 - 1000 full duplex advertised
		    bit 6 - Mac PAUSE frame support advertised
		    bit 7 - Asymmetric PAUSE frame support advertised
                    bit 8 - No advertisements
		    bit 9 - 10G full duplex advertisement
		    bit 10 - Set advertise to default setting based on the
		             hardware capability.
                    bit 11 - 2,5G full duplex advertisement
                    bit 12 - 5G full duplex advertisement

                    The abilities specified in this object are only used
                    when auto-negotiation is enabled on the port.  If all
                    bits in this object are disabled, and auto-negotiation
                    is enabled on the port, then the physical link process
                    on the port will be disabled (if hardware supports
                    this ability).

                    Any change in the value of this bit map will force the
                    PHY to restart the auto-negotiation process.  This will
                    have the same effect as physically unplugging and
                    reattaching the cable plant attached to this port.

		   The capabilities being advertised are either all the
                   capabilities supported by the hardware or the user-
		   configured capabilities which is a subset of all the
		   capability supported by hardware.

                   The default value for this object will be all the
		   capabilities supported by the hardware. Bit 10, default
		   allowed user to set advertise to default. 'default' will take
		   precedence if 'default' bit is combined with other bits.

		   Note that bit 6 and bit 7 are currently not supported
		   in ERS8600."
      ::= { rcPortEntry 62 }

rcPortAutoNegAd · current

rcPortAutoNegAd OBJECT-TYPE
        SYNTAX          BITS {
                            advertise10Half(0),
                            advertise10Full(1),
                            advertise100Half(2),
                            advertise100Full(3),
                            advertise1000Half(4),
                            advertise1000Full(5),
                            advertiseMacPause(6),  -- Not supported in 8600
                            advertiseAsymPause(7), -- Not supported in 8600
                      advertiseNone(8),
		      advertise10000Full(9),
		      default(10)
                        }
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION     "This object is used to specify the port speed
                         and duplex abilities to be advertised during
                         link negotiation.

                         bit 0 - 10 half duplex advertised
                         bit 1 - 10 full duplex advertised
                         bit 2 - 100 half duplex advertised
                         bit 3 - 100 full duplex advertised
                         bit 4 - 1000 half duplex advertised
                         bit 5 - 1000 full duplex advertised
                         bit 6 - Mac PAUSE frame support advertised
                         bit 7 - Asymmetric PAUSE frame support advertised
			             bit 8 - No advertisements
		                 bit 9 - 10G full duplex advertisement
		                 bit 10 - Set advertise to default setting based on the
		                 hardware capability.

                         The abilities specified in this object are only used
                         when auto-negotiation is enabled on the port.  If all
                         bits in this object are disabled, and auto-negotiation
                         is enabled on the port, then the physical link process
                         on the port will be disabled (if hardware supports 
                         this ability).

                         Any change in the value of this bit map will force the
                         PHY to restart the auto-negotiation process.  This will
                         have the same effect as physically unplugging and
                         reattaching the cable plant attached to this port.

                         The capabilities being advertised are either all the 
	                     capabilities supported by the hardware or the user- 
		   	             configured capabilities which is a subset of all the 
		                 capabilities supported by the hardware. Bit 10, default
		                 allowed user to set advertise to default. 'default' will take
		                 precedence if 'default' bit is combined with other bits. 
          
                   	     The default value for this object will be all the 
		                 capabilities supported by the hardware.

		         Note that bit 6 and bit 7 are currently not supported
		         in ERS8600."
        ::= { rcPortEntry 62 }

Meaning

Descriptions

6 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Description 1

This object is used to specify the port speed
and duplex abilities to be advertised during
link negotiation.

bit 0 - 10 half duplex advertised
bit 1 - 10 full duplex advertised
bit 2 - 100 half duplex advertised
bit 3 - 100 full duplex advertised
bit 4 - 1000 half duplex advertised
bit 5 - 1000 full duplex advertised
bit 6 - Mac PAUSE frame support advertised
bit 7 - Asymmetric PAUSE frame support advertised
bit 8 - No advertisements

The abilities specified in this object are only used
when auto-negotiation is enabled on the port. If all
bits in this object are disabled, and auto-negotiation
is enabled on the port, then the physical link process
on the port will be disabled (if hardware supports
this ability).

Any change in the value of this bit map will force the
PHY to restart the auto-negotiation process. This will
have the same effect as physically unplugging and
reattaching the cable plant attached to this port.

The capabilities being advertised are either all the
capabilities supported by the hardware or the user-
configured capabilities which is a subset of all the
capability supported by hardware.

The default value for this object will be all the
capabilities supported by the hardware.

Note that bit 6 and bit 7 are currently not supported
in ERS8600.
Sources for this description

MIBdepot

Parsed from RC-PORT-MIB.mib.txt · avaya · RC-PORT-MIB

Source file: Download RC-PORT-MIB.mib.txt

Browse all files from MIBdepot

Description 2

This object is used to specify the port speed and duplex abilities to be advertised during link negotiation. bit 0 - 10 half duplex advertised bit 1 - 10 full duplex advertised bit 2 - 100 half duplex advertised bit 3 - 100 full duplex advertised bit 5 - 1000 full duplex advertised bit 6 - Mac PAUSE frame support advertised bit 7 - Asymmetric PAUSE frame support advertised bit 8 - No advertisements The abilities specified in this object are only used when auto-negotiation is enabled on the port. If all bits in this object are disabled, and auto-negotiation is enabled on the port, then the physical link process on the port will be disabled (if hardware supports this ability). Any change in the value of this bit map will force the PHY to restart the auto-negotiation process. This will have the same effect as physically unplugging and reattaching the cable plant attached to this port. The capabilities being advertised are either all the capabilities supported by the hardware or the user- configured capabilities which is a subset of all the capability supported by hardware. The default value for this object will be all the capabilities supported by the hardware. Note that bit 6 and bit 7 are currently not supported in ERS8600.

Sources for this description

Nortel MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Description 3

This object is used to specify the port speed and duplex abilities to be advertised during link negotiation. bit 0 - 10 half duplex advertised bit 1 - 10 full duplex advertised bit 2 - 100 half duplex advertised bit 3 - 100 full duplex advertised bit 4 - 1000 half duplex advertised bit 5 - 1000 full duplex advertised bit 6 - Mac PAUSE frame support advertised bit 7 - Asymmetric PAUSE frame support advertised The abilities specified in this object are only used when auto-negotiation is enabled on the port. If all bits in this object are disabled, and auto-negotiation is enabled on the port, then the physical link process on the port will be disabled (if hardware supports this ability). Any change in the value of this bit map will force the PHY to restart the auto-negotiation process. This will have the same effect as physically unplugging and reattaching the cable plant attached to this port. Only capabilities present in the hardware as indicated by rcPortAutoNegAdCapability can be advertised. The default value for this object will be the value of the associated instance of rcPortAutoNegAdCapability.

Sources for this description

MIBdepot

See 1 matching source record

Description 4

This object is used to specify the port speed and duplex abilities to be advertised during link negotiation. bit 0 - 10 half duplex advertised bit 1 - 10 full duplex advertised bit 2 - 100 half duplex advertised bit 3 - 100 full duplex advertised bit 4 - 1000 half duplex advertised bit 5 - 1000 full duplex advertised bit 6 - Mac PAUSE frame support advertised bit 7 - Asymmetric PAUSE frame support advertised bit 8 - No advertisements bit 9 - 10G full duplex advertisement bit 10 - Set advertise to default setting based on the hardware capability. The abilities specified in this object are only used when auto-negotiation is enabled on the port. If all bits in this object are disabled, and auto-negotiation is enabled on the port, then the physical link process on the port will be disabled (if hardware supports this ability). Any change in the value of this bit map will force the PHY to restart the auto-negotiation process. This will have the same effect as physically unplugging and reattaching the cable plant attached to this port. The capabilities being advertised are either all the capabilities supported by the hardware or the user- configured capabilities which is a subset of all the capability supported by hardware. The default value for this object will be all the capabilities supported by the hardware. Bit 10, default allowed user to set advertise to default. 'default' will take precedence if 'default' bit is combined with other bits. Note that bit 6 and bit 7 are currently not supported in ERS8600.

Sources for this description

Nortel MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Description 5

This object is used to specify the port speed and duplex abilities to be advertised during link negotiation. bit 0 - 10 half duplex advertised bit 1 - 10 full duplex advertised bit 2 - 100 half duplex advertised bit 3 - 100 full duplex advertised bit 4 - 1000 half duplex advertised bit 5 - 1000 full duplex advertised bit 6 - Mac PAUSE frame support advertised bit 7 - Asymmetric PAUSE frame support advertised bit 8 - No advertisements bit 9 - 10G full duplex advertisement bit 10 - Set advertise to default setting based on the hardware capability. bit 11 - 2,5G full duplex advertisement bit 12 - 5G full duplex advertisement The abilities specified in this object are only used when auto-negotiation is enabled on the port. If all bits in this object are disabled, and auto-negotiation is enabled on the port, then the physical link process on the port will be disabled (if hardware supports this ability). Any change in the value of this bit map will force the PHY to restart the auto-negotiation process. This will have the same effect as physically unplugging and reattaching the cable plant attached to this port. The capabilities being advertised are either all the capabilities supported by the hardware or the user- configured capabilities which is a subset of all the capability supported by hardware. The default value for this object will be all the capabilities supported by the hardware. Bit 10, default allowed user to set advertise to default. 'default' will take precedence if 'default' bit is combined with other bits. Note that bit 6 and bit 7 are currently not supported in ERS8600.

Sources for this description

Nortel MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Description 6

This object is used to specify the port speed and duplex abilities to be advertised during link negotiation. bit 0 - 10 half duplex advertised bit 1 - 10 full duplex advertised bit 2 - 100 half duplex advertised bit 3 - 100 full duplex advertised bit 4 - 1000 half duplex advertised bit 5 - 1000 full duplex advertised bit 6 - Mac PAUSE frame support advertised bit 7 - Asymmetric PAUSE frame support advertised bit 8 - No advertisements bit 9 - 10G full duplex advertisement bit 10 - Set advertise to default setting based on the hardware capability. The abilities specified in this object are only used when auto-negotiation is enabled on the port. If all bits in this object are disabled, and auto-negotiation is enabled on the port, then the physical link process on the port will be disabled (if hardware supports this ability). Any change in the value of this bit map will force the PHY to restart the auto-negotiation process. This will have the same effect as physically unplugging and reattaching the cable plant attached to this port. The capabilities being advertised are either all the capabilities supported by the hardware or the user- configured capabilities which is a subset of all the capabilities supported by the hardware. Bit 10, default allowed user to set advertise to default. 'default' will take precedence if 'default' bit is combined with other bits. The default value for this object will be all the capabilities supported by the hardware. Note that bit 6 and bit 7 are currently not supported in ERS8600.

Sources for this description

Netdisco MIB archive copiesNortel MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Evidence

Source records

5 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 2Nortel MIB copies (LibreNMS/Observium Community)1 record · 1 source

Description 2

rcPortAutoNegAd · currentNortel MIB copies (LibreNMS/Observium Community)1 source

Status in source: current.

Names: rcPortAutoNegAd

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "rcPortAutoNegAd",
    "OBJECT-TYPE",
    "SYNTAX",
    "BITS",
    "{",
    "advertise10Half",
    "(",
    "0",
    ")",
    ",",
    "advertise10Full",
    "(",
    "1",
    ")",
    ",",
    "advertise100Half",
    "(",
    "2",
    ")",
    ",",
    "advertise100Full",
    "(",
    "3",
    ")",
    ",",
    "advertise1000Full",
    "(",
    "5",
    ")",
    ",",
    "advertiseMacPause",
    "(",
    "6",
    ")",
    ",",
    "advertiseAsymPause",
    "(",
    "7",
    ")",
    ",",
    "advertiseNone",
    "(",
    "8",
    ")",
    "}",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"This object is used to specify the port speed and duplex abilities to be advertised during link negotiation. bit 0 - 10 half duplex advertised bit 1 - 10 full duplex advertised bit 2 - 100 half duplex advertised bit 3 - 100 full duplex advertised bit 5 - 1000 full duplex advertised bit 6 - Mac PAUSE frame support advertised bit 7 - Asymmetric PAUSE frame support advertised bit 8 - No advertisements The abilities specified in this object are only used when auto-negotiation is enabled on the port. If all bits in this object are disabled, and auto-negotiation is enabled on the port, then the physical link process on the port will be disabled (if hardware supports this ability). Any change in the value of this bit map will force the PHY to restart the auto-negotiation process. This will have the same effect as physically unplugging and reattaching the cable plant attached to this port. The capabilities being advertised are either all the capabilities supported by the hardware or the user- configured capabilities which is a subset of all the capability supported by hardware. The default value for this object will be all the capabilities supported by the hardware. Note that bit 6 and bit 7 are currently not supported in ERS8600.\"",
    "::=",
    "{",
    "rcPortEntry",
    "62",
    "}"
  ],
  "syntax_tree": [
    [
      "BITS",
      [
        [
          "advertise10Half",
          0
        ],
        [
          "advertise10Full",
          1
        ],
        [
          "advertise100Half",
          2
        ],
        [
          "advertise100Full",
          3
        ],
        [
          "advertise1000Full",
          5
        ],
        [
          "advertiseMacPause",
          6
        ],
        [
          "advertiseAsymPause",
          7
        ],
        [
          "advertiseNone",
          8
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This object is used to specify the port speed and duplex abilities to be advertised during link negotiation. bit 0 - 10 half duplex advertised bit 1 - 10 full duplex advertised bit 2 - 100 half duplex advertised bit 3 - 100 full duplex advertised bit 5 - 1000 full duplex advertised bit 6 - Mac PAUSE frame support advertised bit 7 - Asymmetric PAUSE frame support advertised bit 8 - No advertisements The abilities specified in this object are only used when auto-negotiation is enabled on the port. If all bits in this object are disabled, and auto-negotiation is enabled on the port, then the physical link process on the port will be disabled (if hardware supports this ability). Any change in the value of this bit map will force the PHY to restart the auto-negotiation process. This will have the same effect as physically unplugging and reattaching the cable plant attached to this port. The capabilities being advertised are either all the capabilities supported by the hardware or the user- configured capabilities which is a subset of all the capability supported by hardware. The default value for this object will be all the capabilities supported by the hardware. Note that bit 6 and bit 7 are currently not supported in ERS8600."
    ],
    null,
    null,
    null,
    null
  ]
}
  • Nortel MIB copies (LibreNMS/Observium Community) · Publisher's source file: Source package: observium-community-latest.tar.gz

    Vendor MIB copy from the Observium Community archive. Nortel support.

    Module: RAPID-CITY-VSP

    See published definition above

    Module imports
    {'IPV6-TC': ['Ipv6IfIndex', 'Ipv6Address', 'Ipv6AddressPrefix', 'Ipv6AddressIfIdentifier', 'Ipv6IfIndexOrZero'], 'BGP4-MIB': ['bgpPeerRemoteAddr', 'bgpPeerLastError', 'bgpPeerState'], 'VRRP-MIB': ['VrId'], 'DVMRP-MIB': ['dvmrpInterfaceIfIndex', 'dvmrpNeighborIfIndex', 'dvmrpNeighborAddress', 'dvmrpInterfaceOperState'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TimeStamp', 'RowPointer', 'StorageType'], 'ATM-TC-MIB': ['AtmAddr'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Gauge32', 'Integer32', 'NOTIFICATION-TYPE', 'Unsigned32', 'Counter32', 'Counter64'], 'RFC1155-SMI': ['enterprises', 'IpAddress', 'TimeTicks', 'Counter'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress', 'ifIndex', 'ifAdminStatus', 'ifOperStatus', 'ifAdminStatus', 'ifOperStatus', 'ifAdminStatus', 'ifOperStatus', 'ipNetToMediaNetAddress', 'ipNetToMediaPhysAddress'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'DIFFSERV-MIB': ['IndexInteger'], 'IGMP-STD-MIB': ['igmpInterfaceIfIndex', 'igmpInterfaceQuerier', 'igmpCacheAddress', 'igmpCacheIfIndex'], 'MPLS-TC-STD-MIB': ['MplsTunnelIndex', 'MplsLabel', 'MplsExtendedTunnelId', 'MplsTunnelInstanceIndex', 'MplsLdpIdentifier', 'MplsLSPID'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressPrefixLength', 'InetPortNumber', 'InetAutonomousSystemNumber'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpSecurityLevel', 'SnmpSecurityModel']}
    · Download RAPID-CITY-VSP

    Related source files and packages:

Records for description 3MIBdepot1 record · 1 source

Description 3

rcPortAutoNegAd · currentMIBdepot1 source

Status in source: current.

Names: rcPortAutoNegAd

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "rcPortAutoNegAd",
    "OBJECT-TYPE",
    "SYNTAX",
    "BITS",
    "{",
    "advertise10Half",
    "(",
    "0",
    ")",
    ",",
    "advertise10Full",
    "(",
    "1",
    ")",
    ",",
    "advertise100Half",
    "(",
    "2",
    ")",
    ",",
    "advertise100Full",
    "(",
    "3",
    ")",
    ",",
    "advertise1000Half",
    "(",
    "4",
    ")",
    ",",
    "advertise1000Full",
    "(",
    "5",
    ")",
    ",",
    "advertiseMacPause",
    "(",
    "6",
    ")",
    ",",
    "advertiseAsymPause",
    "(",
    "7",
    ")",
    "}",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"This object is used to specify the port speed and duplex abilities to be advertised during link negotiation. bit 0 - 10 half duplex advertised bit 1 - 10 full duplex advertised bit 2 - 100 half duplex advertised bit 3 - 100 full duplex advertised bit 4 - 1000 half duplex advertised bit 5 - 1000 full duplex advertised bit 6 - Mac PAUSE frame support advertised bit 7 - Asymmetric PAUSE frame support advertised The abilities specified in this object are only used when auto-negotiation is enabled on the port. If all bits in this object are disabled, and auto-negotiation is enabled on the port, then the physical link process on the port will be disabled (if hardware supports this ability). Any change in the value of this bit map will force the PHY to restart the auto-negotiation process. This will have the same effect as physically unplugging and reattaching the cable plant attached to this port. Only capabilities present in the hardware as indicated by rcPortAutoNegAdCapability can be advertised. The default value for this object will be the value of the associated instance of rcPortAutoNegAdCapability.\"",
    "::=",
    "{",
    "rcPortEntry",
    "62",
    "}"
  ],
  "syntax_tree": [
    [
      "BITS",
      [
        [
          "advertise10Half",
          0
        ],
        [
          "advertise10Full",
          1
        ],
        [
          "advertise100Half",
          2
        ],
        [
          "advertise100Full",
          3
        ],
        [
          "advertise1000Half",
          4
        ],
        [
          "advertise1000Full",
          5
        ],
        [
          "advertiseMacPause",
          6
        ],
        [
          "advertiseAsymPause",
          7
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This object is used to specify the port speed and duplex abilities to be advertised during link negotiation. bit 0 - 10 half duplex advertised bit 1 - 10 full duplex advertised bit 2 - 100 half duplex advertised bit 3 - 100 full duplex advertised bit 4 - 1000 half duplex advertised bit 5 - 1000 full duplex advertised bit 6 - Mac PAUSE frame support advertised bit 7 - Asymmetric PAUSE frame support advertised The abilities specified in this object are only used when auto-negotiation is enabled on the port. If all bits in this object are disabled, and auto-negotiation is enabled on the port, then the physical link process on the port will be disabled (if hardware supports this ability). Any change in the value of this bit map will force the PHY to restart the auto-negotiation process. This will have the same effect as physically unplugging and reattaching the cable plant attached to this port. Only capabilities present in the hardware as indicated by rcPortAutoNegAdCapability can be advertised. The default value for this object will be the value of the associated instance of rcPortAutoNegAdCapability."
    ],
    null,
    null,
    null,
    null
  ]
}
  • Preserved mibdepot archive

    Module: RAPID-CITY

    See published definition above

    Module imports
    {'IGMP-MIB': ['igmpCacheAddress', 'igmpCacheIfIndex'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'RowStatus', 'TruthValue', 'MacAddress', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Gauge32', 'Counter32', 'Counter64', 'Integer32', 'enterprises', 'IpAddress', 'TimeTicks', 'Unsigned32'], 'RFC1213-MIB': ['PhysAddress'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'POWER-ETHERNET-MIB': ['pethMainPseConsumptionPower', 'pethPsePortDetectionStatus', 'pethPsePortPowerMaintenanceStatus', 'pethMainPseBackupActivated'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}
    · Download rapid_city.mib.txt
Records for description 4Nortel MIB copies (LibreNMS/Observium Community)1 record · 1 source

Description 4

rcPortAutoNegAd · currentNortel MIB copies (LibreNMS/Observium Community)1 source

Status in source: current.

Names: rcPortAutoNegAd

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "rcPortAutoNegAd",
    "OBJECT-TYPE",
    "SYNTAX",
    "BITS",
    "{",
    "advertise10Half",
    "(",
    "0",
    ")",
    ",",
    "advertise10Full",
    "(",
    "1",
    ")",
    ",",
    "advertise100Half",
    "(",
    "2",
    ")",
    ",",
    "advertise100Full",
    "(",
    "3",
    ")",
    ",",
    "advertise1000Half",
    "(",
    "4",
    ")",
    ",",
    "advertise1000Full",
    "(",
    "5",
    ")",
    ",",
    "advertiseMacPause",
    "(",
    "6",
    ")",
    ",",
    "advertiseAsymPause",
    "(",
    "7",
    ")",
    ",",
    "advertiseNone",
    "(",
    "8",
    ")",
    ",",
    "advertise10000Full",
    "(",
    "9",
    ")",
    ",",
    "default",
    "(",
    "10",
    ")",
    ",",
    "advertise2500Full",
    "(",
    "11",
    ")",
    ",",
    "advertise5000Full",
    "(",
    "12",
    ")",
    "}",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"This object is used to specify the port speed and duplex abilities to be advertised during link negotiation. bit 0 - 10 half duplex advertised bit 1 - 10 full duplex advertised bit 2 - 100 half duplex advertised bit 3 - 100 full duplex advertised bit 4 - 1000 half duplex advertised bit 5 - 1000 full duplex advertised bit 6 - Mac PAUSE frame support advertised bit 7 - Asymmetric PAUSE frame support advertised bit 8 - No advertisements bit 9 - 10G full duplex advertisement bit 10 - Set advertise to default setting based on the hardware capability. The abilities specified in this object are only used when auto-negotiation is enabled on the port. If all bits in this object are disabled, and auto-negotiation is enabled on the port, then the physical link process on the port will be disabled (if hardware supports this ability). Any change in the value of this bit map will force the PHY to restart the auto-negotiation process. This will have the same effect as physically unplugging and reattaching the cable plant attached to this port. The capabilities being advertised are either all the capabilities supported by the hardware or the user- configured capabilities which is a subset of all the capability supported by hardware. The default value for this object will be all the capabilities supported by the hardware. Bit 10, default allowed user to set advertise to default. 'default' will take precedence if 'default' bit is combined with other bits. Note that bit 6 and bit 7 are currently not supported in ERS8600.\"",
    "::=",
    "{",
    "rcPortEntry",
    "62",
    "}"
  ],
  "syntax_tree": [
    [
      "BITS",
      [
        [
          "advertise10Half",
          0
        ],
        [
          "advertise10Full",
          1
        ],
        [
          "advertise100Half",
          2
        ],
        [
          "advertise100Full",
          3
        ],
        [
          "advertise1000Half",
          4
        ],
        [
          "advertise1000Full",
          5
        ],
        [
          "advertiseMacPause",
          6
        ],
        [
          "advertiseAsymPause",
          7
        ],
        [
          "advertiseNone",
          8
        ],
        [
          "advertise10000Full",
          9
        ],
        [
          "default",
          10
        ],
        [
          "advertise2500Full",
          11
        ],
        [
          "advertise5000Full",
          12
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This object is used to specify the port speed and duplex abilities to be advertised during link negotiation. bit 0 - 10 half duplex advertised bit 1 - 10 full duplex advertised bit 2 - 100 half duplex advertised bit 3 - 100 full duplex advertised bit 4 - 1000 half duplex advertised bit 5 - 1000 full duplex advertised bit 6 - Mac PAUSE frame support advertised bit 7 - Asymmetric PAUSE frame support advertised bit 8 - No advertisements bit 9 - 10G full duplex advertisement bit 10 - Set advertise to default setting based on the hardware capability. The abilities specified in this object are only used when auto-negotiation is enabled on the port. If all bits in this object are disabled, and auto-negotiation is enabled on the port, then the physical link process on the port will be disabled (if hardware supports this ability). Any change in the value of this bit map will force the PHY to restart the auto-negotiation process. This will have the same effect as physically unplugging and reattaching the cable plant attached to this port. The capabilities being advertised are either all the capabilities supported by the hardware or the user- configured capabilities which is a subset of all the capability supported by hardware. The default value for this object will be all the capabilities supported by the hardware. Bit 10, default allowed user to set advertise to default. 'default' will take precedence if 'default' bit is combined with other bits. Note that bit 6 and bit 7 are currently not supported in ERS8600."
    ],
    null,
    null,
    null,
    null
  ]
}
Records for description 5Nortel MIB copies (LibreNMS/Observium Community)1 record · 1 source

Description 5

rcPortAutoNegAd · currentNortel MIB copies (LibreNMS/Observium Community)1 source

Status in source: current.

Names: rcPortAutoNegAd

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "rcPortAutoNegAd",
    "OBJECT-TYPE",
    "SYNTAX",
    "BITS",
    "{",
    "advertise10Half",
    "(",
    "0",
    ")",
    ",",
    "advertise10Full",
    "(",
    "1",
    ")",
    ",",
    "advertise100Half",
    "(",
    "2",
    ")",
    ",",
    "advertise100Full",
    "(",
    "3",
    ")",
    ",",
    "advertise1000Half",
    "(",
    "4",
    ")",
    ",",
    "advertise1000Full",
    "(",
    "5",
    ")",
    ",",
    "advertiseMacPause",
    "(",
    "6",
    ")",
    ",",
    "advertiseAsymPause",
    "(",
    "7",
    ")",
    ",",
    "advertiseNone",
    "(",
    "8",
    ")",
    ",",
    "advertise10000Full",
    "(",
    "9",
    ")",
    ",",
    "default",
    "(",
    "10",
    ")",
    ",",
    "advertise2500Full",
    "(",
    "11",
    ")",
    ",",
    "advertise5000Full",
    "(",
    "12",
    ")",
    "}",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"This object is used to specify the port speed and duplex abilities to be advertised during link negotiation. bit 0 - 10 half duplex advertised bit 1 - 10 full duplex advertised bit 2 - 100 half duplex advertised bit 3 - 100 full duplex advertised bit 4 - 1000 half duplex advertised bit 5 - 1000 full duplex advertised bit 6 - Mac PAUSE frame support advertised bit 7 - Asymmetric PAUSE frame support advertised bit 8 - No advertisements bit 9 - 10G full duplex advertisement bit 10 - Set advertise to default setting based on the hardware capability. bit 11 - 2,5G full duplex advertisement bit 12 - 5G full duplex advertisement The abilities specified in this object are only used when auto-negotiation is enabled on the port. If all bits in this object are disabled, and auto-negotiation is enabled on the port, then the physical link process on the port will be disabled (if hardware supports this ability). Any change in the value of this bit map will force the PHY to restart the auto-negotiation process. This will have the same effect as physically unplugging and reattaching the cable plant attached to this port. The capabilities being advertised are either all the capabilities supported by the hardware or the user- configured capabilities which is a subset of all the capability supported by hardware. The default value for this object will be all the capabilities supported by the hardware. Bit 10, default allowed user to set advertise to default. 'default' will take precedence if 'default' bit is combined with other bits. Note that bit 6 and bit 7 are currently not supported in ERS8600.\"",
    "::=",
    "{",
    "rcPortEntry",
    "62",
    "}"
  ],
  "syntax_tree": [
    [
      "BITS",
      [
        [
          "advertise10Half",
          0
        ],
        [
          "advertise10Full",
          1
        ],
        [
          "advertise100Half",
          2
        ],
        [
          "advertise100Full",
          3
        ],
        [
          "advertise1000Half",
          4
        ],
        [
          "advertise1000Full",
          5
        ],
        [
          "advertiseMacPause",
          6
        ],
        [
          "advertiseAsymPause",
          7
        ],
        [
          "advertiseNone",
          8
        ],
        [
          "advertise10000Full",
          9
        ],
        [
          "default",
          10
        ],
        [
          "advertise2500Full",
          11
        ],
        [
          "advertise5000Full",
          12
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This object is used to specify the port speed and duplex abilities to be advertised during link negotiation. bit 0 - 10 half duplex advertised bit 1 - 10 full duplex advertised bit 2 - 100 half duplex advertised bit 3 - 100 full duplex advertised bit 4 - 1000 half duplex advertised bit 5 - 1000 full duplex advertised bit 6 - Mac PAUSE frame support advertised bit 7 - Asymmetric PAUSE frame support advertised bit 8 - No advertisements bit 9 - 10G full duplex advertisement bit 10 - Set advertise to default setting based on the hardware capability. bit 11 - 2,5G full duplex advertisement bit 12 - 5G full duplex advertisement The abilities specified in this object are only used when auto-negotiation is enabled on the port. If all bits in this object are disabled, and auto-negotiation is enabled on the port, then the physical link process on the port will be disabled (if hardware supports this ability). Any change in the value of this bit map will force the PHY to restart the auto-negotiation process. This will have the same effect as physically unplugging and reattaching the cable plant attached to this port. The capabilities being advertised are either all the capabilities supported by the hardware or the user- configured capabilities which is a subset of all the capability supported by hardware. The default value for this object will be all the capabilities supported by the hardware. Bit 10, default allowed user to set advertise to default. 'default' will take precedence if 'default' bit is combined with other bits. Note that bit 6 and bit 7 are currently not supported in ERS8600."
    ],
    null,
    null,
    null,
    null
  ]
}
  • Nortel MIB copies (LibreNMS/Observium Community) · Publisher's source file: RAPID-CITY

    Vendor MIB copy from the LibreNMS archive. Nortel support.

    Module: RAPID-CITY

    See published definition above

    Module imports
    {'IPV6-TC': ['Ipv6IfIndex', 'Ipv6Address', 'Ipv6AddressPrefix', 'Ipv6AddressIfIdentifier', 'Ipv6IfIndexOrZero'], 'BGP4-MIB': ['bgpPeerRemoteAddr', 'bgpPeerLastError', 'bgpPeerState'], 'IGMP-MIB': ['igmpInterfaceIfIndex', 'igmpInterfaceQuerier', 'igmpCacheAddress', 'igmpCacheIfIndex'], 'IPV6-MIB': ['ipv6RouteEntry'], 'LLDP-MIB': ['AddressFamilyNumbers', 'LldpManAddress', 'LldpSystemCapabilitiesMap', 'LldpPortIdSubtype', 'LldpPortId', 'lldpRemEntry'], 'MSDP-MIB': ['msdpPeerFsmEstablishedTransitions', 'msdpPeerState', 'msdpPeerEntry', 'msdpSACacheEntry'], 'VRRP-MIB': ['VrId'], 'DVMRP-MIB': ['dvmrpInterfaceIfIndex', 'dvmrpNeighborIfIndex', 'dvmrpNeighborAddress', 'dvmrpInterfaceOperState'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TimeStamp', 'RowPointer', 'StorageType', 'TimeInterval'], 'ATM-TC-MIB': ['AtmAddr'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Gauge32', 'Integer32', 'NOTIFICATION-TYPE', 'Unsigned32', 'Counter32', 'Counter64'], 'RFC1155-SMI': ['enterprises', 'IpAddress', 'TimeTicks', 'Counter'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress', 'ifIndex', 'ifAdminStatus', 'ifOperStatus', 'ifAdminStatus', 'ifOperStatus', 'ifAdminStatus', 'ifOperStatus', 'ipNetToMediaNetAddress', 'ipNetToMediaPhysAddress'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'DIFFSERV-MIB': ['IndexInteger'], 'IPMROUTE-MIB': ['ipMRouteEntry', 'ipMRouteNextHopEntry', 'ipMRouteInterfaceEntry'], 'IPV6-MLD-MIB': ['mldInterfaceQuerier', 'mldInterfaceIfIndex'], 'MPLS-TC-STD-MIB': ['MplsTunnelIndex', 'MplsLabel', 'MplsExtendedTunnelId', 'MplsTunnelInstanceIndex', 'MplsLdpIdentifier', 'MplsLSPID'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressPrefixLength', 'InetPortNumber', 'InetAutonomousSystemNumber'], 'IEEE8021-SECY-MIB': ['secyIfEntry'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpSecurityLevel', 'SnmpSecurityModel'], 'RADIUS-DYNAUTH-SERVER-MIB': ['radiusDynAuthClientEntry']}
    · Download RAPID-CITY
Records for description 6Netdisco MIB archive copies, Nortel MIB copies (LibreNMS/Observium Community)1 record · 2 sources

Description 6

rcPortAutoNegAd · currentNetdisco MIB archive copies, Nortel MIB copies (LibreNMS/Observium Community)2 sources

Status in source: current.

Names: rcPortAutoNegAd

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "rcPortAutoNegAd",
    "OBJECT-TYPE",
    "SYNTAX",
    "BITS",
    "{",
    "advertise10Half",
    "(",
    "0",
    ")",
    ",",
    "advertise10Full",
    "(",
    "1",
    ")",
    ",",
    "advertise100Half",
    "(",
    "2",
    ")",
    ",",
    "advertise100Full",
    "(",
    "3",
    ")",
    ",",
    "advertise1000Half",
    "(",
    "4",
    ")",
    ",",
    "advertise1000Full",
    "(",
    "5",
    ")",
    ",",
    "advertiseMacPause",
    "(",
    "6",
    ")",
    ",",
    "advertiseAsymPause",
    "(",
    "7",
    ")",
    ",",
    "advertiseNone",
    "(",
    "8",
    ")",
    ",",
    "advertise10000Full",
    "(",
    "9",
    ")",
    ",",
    "default",
    "(",
    "10",
    ")",
    "}",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"This object is used to specify the port speed and duplex abilities to be advertised during link negotiation. bit 0 - 10 half duplex advertised bit 1 - 10 full duplex advertised bit 2 - 100 half duplex advertised bit 3 - 100 full duplex advertised bit 4 - 1000 half duplex advertised bit 5 - 1000 full duplex advertised bit 6 - Mac PAUSE frame support advertised bit 7 - Asymmetric PAUSE frame support advertised bit 8 - No advertisements bit 9 - 10G full duplex advertisement bit 10 - Set advertise to default setting based on the hardware capability. The abilities specified in this object are only used when auto-negotiation is enabled on the port. If all bits in this object are disabled, and auto-negotiation is enabled on the port, then the physical link process on the port will be disabled (if hardware supports this ability). Any change in the value of this bit map will force the PHY to restart the auto-negotiation process. This will have the same effect as physically unplugging and reattaching the cable plant attached to this port. The capabilities being advertised are either all the capabilities supported by the hardware or the user- configured capabilities which is a subset of all the capabilities supported by the hardware. Bit 10, default allowed user to set advertise to default. 'default' will take precedence if 'default' bit is combined with other bits. The default value for this object will be all the capabilities supported by the hardware. Note that bit 6 and bit 7 are currently not supported in ERS8600.\"",
    "::=",
    "{",
    "rcPortEntry",
    "62",
    "}"
  ],
  "syntax_tree": [
    [
      "BITS",
      [
        [
          "advertise10Half",
          0
        ],
        [
          "advertise10Full",
          1
        ],
        [
          "advertise100Half",
          2
        ],
        [
          "advertise100Full",
          3
        ],
        [
          "advertise1000Half",
          4
        ],
        [
          "advertise1000Full",
          5
        ],
        [
          "advertiseMacPause",
          6
        ],
        [
          "advertiseAsymPause",
          7
        ],
        [
          "advertiseNone",
          8
        ],
        [
          "advertise10000Full",
          9
        ],
        [
          "default",
          10
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This object is used to specify the port speed and duplex abilities to be advertised during link negotiation. bit 0 - 10 half duplex advertised bit 1 - 10 full duplex advertised bit 2 - 100 half duplex advertised bit 3 - 100 full duplex advertised bit 4 - 1000 half duplex advertised bit 5 - 1000 full duplex advertised bit 6 - Mac PAUSE frame support advertised bit 7 - Asymmetric PAUSE frame support advertised bit 8 - No advertisements bit 9 - 10G full duplex advertisement bit 10 - Set advertise to default setting based on the hardware capability. The abilities specified in this object are only used when auto-negotiation is enabled on the port. If all bits in this object are disabled, and auto-negotiation is enabled on the port, then the physical link process on the port will be disabled (if hardware supports this ability). Any change in the value of this bit map will force the PHY to restart the auto-negotiation process. This will have the same effect as physically unplugging and reattaching the cable plant attached to this port. The capabilities being advertised are either all the capabilities supported by the hardware or the user- configured capabilities which is a subset of all the capabilities supported by the hardware. Bit 10, default allowed user to set advertise to default. 'default' will take precedence if 'default' bit is combined with other bits. The default value for this object will be all the capabilities supported by the hardware. Note that bit 6 and bit 7 are currently not supported in ERS8600."
    ],
    null,
    null,
    null,
    null
  ]
}
  • Nortel MIB copies (LibreNMS/Observium Community) · Publisher's source file: Source package: observium-community-latest.tar.gz

    Vendor MIB copy from the Observium Community archive. Nortel support.

    Module: RAPID-CITY

    See published definition above

    Module imports
    {'IF-MIB': ['ifIndex', 'ifAdminStatus', 'ifOperStatus'], 'IP-MIB': ['ipNetToMediaNetAddress', 'ipNetToMediaPhysAddress'], 'IPV6-TC': ['Ipv6IfIndex', 'Ipv6Address', 'Ipv6AddressPrefix', 'Ipv6AddressIfIdentifier', 'Ipv6IfIndexOrZero'], 'BGP4-MIB': ['bgpPeerRemoteAddr', 'bgpPeerLastError', 'bgpPeerState'], 'IPV6-MIB': ['ipv6RouteEntry'], 'LLDP-MIB': ['AddressFamilyNumbers', 'LldpManAddress', 'LldpSystemCapabilitiesMap', 'LldpPortIdSubtype', 'LldpPortId', 'lldpRemEntry'], 'MSDP-MIB': ['msdpPeerFsmEstablishedTransitions', 'msdpPeerState', 'msdpPeerEntry', 'msdpSACacheEntry', 'msdpPeerFsmEstablishedTransitions', 'msdpPeerState', 'msdpPeerEntry', 'msdpSACacheEntry'], 'VRRP-MIB': ['VrId'], 'DVMRP-MIB': ['dvmrpInterfaceIfIndex', 'dvmrpNeighborIfIndex', 'dvmrpNeighborAddress', 'dvmrpInterfaceOperState'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'RowStatus', 'TruthValue', 'MacAddress', 'DisplayString', 'PhysAddress', 'DateAndTime', 'TimeStamp', 'RowPointer', 'StorageType', 'TimeInterval'], 'ATM-TC-MIB': ['AtmAddr'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Gauge32', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'enterprises', 'IpAddress', 'TimeTicks'], 'TUNNEL-MIB': ['tunnelInetConfigEntry'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'DIFFSERV-MIB': ['IndexInteger'], 'IGMP-STD-MIB': ['igmpInterfaceIfIndex', 'igmpInterfaceQuerier', 'igmpCacheAddress', 'igmpCacheIfIndex'], 'IPV6-MLD-MIB': ['mldInterfaceQuerier', 'mldInterfaceIfIndex'], 'MPLS-TC-STD-MIB': ['MplsTunnelIndex', 'MplsLabel', 'MplsExtendedTunnelId', 'MplsTunnelInstanceIndex', 'MplsLdpIdentifier', 'MplsLSPID'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressPrefixLength', 'InetPortNumber', 'InetAutonomousSystemNumber'], 'IPMROUTE-STD-MIB': ['ipMRouteEntry', 'ipMRouteNextHopEntry', 'ipMRouteInterfaceEntry'], 'LLDP-EXT-MED-MIB': ['PolicyAppType'], 'IEEE8021-SECY-MIB': ['secyIfEntry'], 'POWER-ETHERNET-MIB': ['pethPsePortDetectionStatus', 'pethMainPseConsumptionPower'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpSecurityLevel', 'SnmpSecurityModel']}
    · Download RAPID-CITY
  • Netdisco MIB archive copies · Publisher's source file: rapid_city.mib

    Vendor MIB copy from the Netdisco archive.

    Module: RAPID-CITY

    Same published definition

    Module imports
    {'IF-MIB': ['ifIndex', 'ifAdminStatus', 'ifOperStatus'], 'IP-MIB': ['ipNetToMediaNetAddress', 'ipNetToMediaPhysAddress'], 'IPV6-TC': ['Ipv6IfIndex', 'Ipv6Address', 'Ipv6AddressPrefix', 'Ipv6AddressIfIdentifier', 'Ipv6IfIndexOrZero'], 'BGP4-MIB': ['bgpPeerRemoteAddr', 'bgpPeerLastError', 'bgpPeerState'], 'IPV6-MIB': ['ipv6RouteEntry'], 'LLDP-MIB': ['AddressFamilyNumbers', 'LldpManAddress', 'LldpSystemCapabilitiesMap', 'LldpPortIdSubtype', 'LldpPortId', 'lldpRemEntry'], 'MSDP-MIB': ['msdpPeerFsmEstablishedTransitions', 'msdpPeerState', 'msdpPeerEntry', 'msdpSACacheEntry', 'msdpPeerFsmEstablishedTransitions', 'msdpPeerState', 'msdpPeerEntry', 'msdpSACacheEntry'], 'VRRP-MIB': ['VrId'], 'DVMRP-MIB': ['dvmrpInterfaceIfIndex', 'dvmrpNeighborIfIndex', 'dvmrpNeighborAddress', 'dvmrpInterfaceOperState'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'RowStatus', 'TruthValue', 'MacAddress', 'DisplayString', 'PhysAddress', 'DateAndTime', 'TimeStamp', 'RowPointer', 'StorageType', 'TimeInterval'], 'ATM-TC-MIB': ['AtmAddr'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Gauge32', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'enterprises', 'IpAddress', 'TimeTicks'], 'TUNNEL-MIB': ['tunnelInetConfigEntry'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'DIFFSERV-MIB': ['IndexInteger'], 'IGMP-STD-MIB': ['igmpInterfaceIfIndex', 'igmpInterfaceQuerier', 'igmpCacheAddress', 'igmpCacheIfIndex'], 'IPMROUTE-MIB': ['ipMRouteEntry', 'ipMRouteNextHopEntry', 'ipMRouteInterfaceEntry'], 'IPV6-MLD-MIB': ['mldInterfaceQuerier', 'mldInterfaceIfIndex'], 'MPLS-TC-STD-MIB': ['MplsTunnelIndex', 'MplsLabel', 'MplsExtendedTunnelId', 'MplsTunnelInstanceIndex', 'MplsLdpIdentifier', 'MplsLSPID'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressPrefixLength', 'InetPortNumber', 'InetAutonomousSystemNumber'], 'LLDP-EXT-MED-MIB': ['PolicyAppType'], 'IEEE8021-SECY-MIB': ['secyIfEntry'], 'POWER-ETHERNET-MIB': ['pethPsePortDetectionStatus', 'pethMainPseConsumptionPower'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpSecurityLevel', 'SnmpSecurityModel']}
    · Download rapid_city.mib

Historical records

Additional source information

Information from MIBdepot
rcPortAutoNegAd OBJECT-TYPE
        SYNTAX          BITS {
                            advertise10Half(0),
                            advertise10Full(1),
                            advertise100Half(2),
                            advertise100Full(3),
                            advertise1000Half(4),
                            advertise1000Full(5),
                            advertiseMacPause(6),  
                            advertiseAsymPause(7), 
			    advertiseNone(8)
                        }
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION     "This object is used to specify the port speed
                         and duplex abilities to be advertised during
                         link negotiation.

                         bit 0 - 10 half duplex advertised
                         bit 1 - 10 full duplex advertised
                         bit 2 - 100 half duplex advertised
                         bit 3 - 100 full duplex advertised
                         bit 4 - 1000 half duplex advertised
                         bit 5 - 1000 full duplex advertised
                         bit 6 - Mac PAUSE frame support advertised
                         bit 7 - Asymmetric PAUSE frame support advertised
			 bit 8 - No advertisements

                         The abilities specified in this object are only used
                         when auto-negotiation is enabled on the port.  If all
                         bits in this object are disabled, and auto-negotiation
                         is enabled on the port, then the physical link process
                         on the port will be disabled (if hardware supports 
                         this ability).

                         Any change in the value of this bit map will force the
                         PHY to restart the auto-negotiation process.  This will
                         have the same effect as physically unplugging and
                         reattaching the cable plant attached to this port.

                         The capabilities being advertised are either all the 
	                 capabilities supported by the hardware or the user- 
		   	 configured capabilities which is a subset of all the 
		         capability supported by hardware.
          
                   	 The default value for this object will be all the 
		         capabilities supported by the hardware.

		         Note that bit 6 and bit 7 are currently not supported
		         in ERS8600."
        ::= { rcPortEntry 62 }
Information from OID Repository
Vendor: Rapid City Communication
Module: RAPID-CITY

[Automatically extracted from oidview.com]

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.2272)

Sharon Chisholm

Siblings (127)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.2272.1.4.10.1.1.57 rcPortMrouteStrLimitEnable00 enable or disable mroute stream limit on port.
1.3.6.1.4.1.2272.1.4.10.1.1.58 rcPortUpdateDynamicMacQosLevel00 It is used to indicate whether to update qos
level for dynamic learned mac add resses
associated with a port-based vlan when port…
1.3.6.1.4.1.2272.1.4.10.1.1.59 rcPortVplsDualHoming00 The VPLS dual homing is for VPLS service type only.
It can be disable, firstNNI or secondNNI.
1.3.6.1.4.1.2272.1.4.10.1.1.60 rcPortVplsMgmtVlan00 Management Vlan is configured on this port
1.3.6.1.4.1.2272.1.4.10.1.1.61 rcPortTlsManagedBySp00 True/False tls devices on port Managed By Service Provider.
1.3.6.1.4.1.2272.1.4.10.1.1.63 rcPortAutoNegAdCapability00 This object indicates the port speed and duplex
capabilities that hardware can actually support on a
port, and which may be adver…
1.3.6.1.4.1.2272.1.4.10.1.1.64 rcPortAutoRecoverPort00 enable or disable auto recovery of port from action
taken by cp-limit, link flap or loop detect features
1.3.6.1.4.1.2272.1.4.10.1.1.65 rcPortExtCplimitConf00 Indicates the port configuration for extended CP-LIMIT
1.3.6.1.4.1.2272.1.4.10.1.1.66 rcPortExtCplimitUtilRate00 Threshold for Ingress traffic utilization rate of the port
for extended CP-LIMIT
1.3.6.1.4.1.2272.1.4.10.1.1.67 rcPortEgressRateLimit00 Egress Rate Limit.
1.3.6.1.4.1.2272.1.4.10.1.1.68 rcPortEgressRateLimitState00 Used to enable/disable shape/egress-rate-limit
functionality.
1.3.6.1.4.1.2272.1.4.10.1.1.69 rcPortBpduFilteringTimerCount00 The remaining time the port will be disabled due
to a BPDU received when BPDU filtering is enabled.
1.3.6.1.4.1.2272.1.4.10.1.1.70 rcPortBpduFilteringTimeout00 The time the port will be disabled when a BPDU is
received when BPDU filtering is enabled.
1.3.6.1.4.1.2272.1.4.10.1.1.71 rcPortBpduFilteringAdminEnabled00 Used to enable/disable BPDU filtering.
1.3.6.1.4.1.2272.1.4.10.1.1.72 rcPortBpduFilteringOperEnabled00 Indicates whether BPDU filtering is actually
enabled or disabled.
1.3.6.1.4.1.2272.1.4.10.1.1.73 rcPortQinqEtherType00 The qinq ether type value. It is hex value.
It should be displayed and input as Hex value. It is
only be used when port is associ…
1.3.6.1.4.1.2272.1.4.10.1.1.74 rcPortTrustDscp00 Used to enable/disable the trusted DSCP feature.
If enabled, the internal qos-level and 802.1p value are derived
from the receive…
1.3.6.1.4.1.2272.1.4.10.1.1.75 rcPortCpLimitEnable00 Used to enable/disable the control packet rate limit.
Specifies whether or not rate limiting is currently in
operation for multic…
1.3.6.1.4.1.2272.1.4.10.1.1.76 rcPortCpMulticastLimit00 Used to limit Multicast traffic on the specified port. Sets
the limit in packets per second.
1.3.6.1.4.1.2272.1.4.10.1.1.77 rcPortCpBroadcastLimit00 Used to limit Broadcast traffic on the specified port. Sets
the limit in packets per second.
1.3.6.1.4.1.2272.1.4.10.1.1.78 rcPortSmartAutoNegotiate00 This object indicates whether 'smart' autonegotiation is
enabled on a port (smart autonegotiation indicates that the
port can sen…
1.3.6.1.4.1.2272.1.4.10.1.1.79 rcPortMepList00 List of Meps assigned to this entry. A mep is consist of <md>.<ma>.<mep_id>. Domain Name, Association and Mep Id is separated b…
1.3.6.1.4.1.2272.1.4.10.1.1.80 rcPortNumOfMep00 Used to indicate the number of Meps
is assigned to this entry
1.3.6.1.4.1.2272.1.4.10.1.1.81 rcPortAdacStatus00 If enabled, the Nortel IP phones connected to the port will be
configured in the voice VLAN.
1.3.6.1.4.1.2272.1.4.10.1.1.82 rcPortPvid00 A port Vlan Id associates with ESM and RModule
port for OEL2/MIM traffic
1.3.6.1.4.1.2272.1.4.10.1.1.83 rcPortTdp00 This attribute allows to Enable/Disable Transparent
Domain Protocol at the port level on the ESM and
Power Ranger Card. For the T…
1.3.6.1.4.1.2272.1.4.10.1.1.84 rcPortClockSource00 Indicates this port's current WAN clock source.
Valid for 10 GE WAN only
1.3.6.1.4.1.2272.1.4.10.1.1.85 rcPortIngressRateLimit00 Limits the amount of traffic from this Ingress port.
1.3.6.1.4.1.2272.1.4.10.1.1.86 rcPortIngressRateLimitState00 Used to enable/disable police/ingress-rate-limit
functionality.
1.3.6.1.4.1.2272.1.4.10.1.1.87 rcPortVrfIdList00 The set of VRF ids to which this port belongs.
1.3.6.1.4.1.2272.1.4.10.1.1.88 rcPortCfmVid00 CFM default port vid
1.3.6.1.4.1.2272.1.4.10.1.1.89 rcPortUserLabel100 User provided field. Used to give extra management information/data
1.3.6.1.4.1.2272.1.4.10.1.1.90 rcPortUserLabel200 User provided additional field. Used to give extra management information/data
1.3.6.1.4.1.2272.1.4.10.1.1.91 rcPortClearCfmStats00 To clear the port counter
1.3.6.1.4.1.2272.1.4.10.1.1.92 rcPortInterfaceType00 This value indicates whether a port is of type <normal/si lent/uni>. A port can be included in any EVPN service only if this at…
1.3.6.1.4.1.2272.1.4.10.1.1.93 rcPortCfmControlMep00 MEP assigned for CFM Control. A mep consists of <md>.<ma>.<mep_id>. Domain Name, Association and Mep Id is separated by '.'
1.3.6.1.4.1.2272.1.4.10.1.1.94 rcPortMtu00 Port Mtu
1.3.6.1.4.1.2272.1.4.10.1.1.95 rcPortMtuState00 Used to enable/disable Port Mtu
functionality.
1.3.6.1.4.1.2272.1.4.10.1.1.96 rcPortVrfNameList00 The set of VRF names to which this port belongs.
1.3.6.1.4.1.2272.1.4.10.1.1.97 rcPortBrouterVrfId00 Gives the VRF Id for this Brouter port.
1.3.6.1.4.1.2272.1.4.10.1.1.98 rcPortBrouterVrfName00 Gives the VRF Name for this Brouter port.
1.3.6.1.4.1.2272.1.4.10.1.1.99 rcPortVrfCount00 The total number of VRFs this port is associated to.
1.3.6.1.4.1.2272.1.4.10.1.1.100 rcPortCtrlPktDropLimitEnable00 Used to enable/disable Control Packets Drop
Rate Limiter functionality.
1.3.6.1.4.1.2272.1.4.10.1.1.101 rcPortCtrlPktDropLimit00 Indicates the Control Packet drop rate limit
value
1.3.6.1.4.1.2272.1.4.10.1.1.102 rcPortCtrlPktShutdownLimitEnable00 Used to enable/disable Control Packets
Shutdown Rate Limiter functionality.
1.3.6.1.4.1.2272.1.4.10.1.1.103 rcPortCtrlPktShutdownLimit00 Indicates the Control Packet shutdown rate
Limit value
1.3.6.1.4.1.2272.1.4.10.1.1.104 rcPortCtrlPktShutdownRtExceeded00 Indicates if the Shutdown rate has been exceeded
on the port
1.3.6.1.4.1.2272.1.4.10.1.1.105 rcPortCtrlPktDropRtExceeded00 Indicates if the Drop rate has been exceeded
on the port
1.3.6.1.4.1.2272.1.4.10.1.1.106 rcPortDhcpOption82SubscriberId00 This object contains the DHCP option 82 subscriber ID string to
be used in sub-option 6. If the value is an empty string, then
s…
1.3.6.1.4.1.2272.1.4.10.1.1.107 rcPortServiceCardType00