| 1.3.6.1.4.1.2272.1.4.10.1.1.57 |
rcPortMrouteStrLimitEnable | 0 | 0 |
enable or disable mroute stream limit on port. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.58 |
rcPortUpdateDynamicMacQosLevel | 0 | 0 |
It is used to indicate whether to update qos level for dynamic learned mac add resses associated with a port-based vlan when port… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.59 |
rcPortVplsDualHoming | 0 | 0 |
The VPLS dual homing is for VPLS service type only. It can be disable, firstNNI or secondNNI. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.60 |
rcPortVplsMgmtVlan | 0 | 0 |
Management Vlan is configured on this port |
| 1.3.6.1.4.1.2272.1.4.10.1.1.61 |
rcPortTlsManagedBySp | 0 | 0 |
True/False tls devices on port Managed By Service Provider. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.62 |
rcPortAutoNegAd | 0 | 0 |
This object is used to specify the port speed and duplex abilities to be advertised during link negotiation.
bit 0 - 10 half duple… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.63 |
rcPortAutoNegAdCapability | 0 | 0 |
This object indicates the port speed and duplex capabilities that hardware can actually support on a port, and which may be adver… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.64 |
rcPortAutoRecoverPort | 0 | 0 |
enable or disable auto recovery of port from action taken by cp-limit, link flap or loop detect features |
| 1.3.6.1.4.1.2272.1.4.10.1.1.65 |
rcPortExtCplimitConf | 0 | 0 |
Indicates the port configuration for extended CP-LIMIT |
| 1.3.6.1.4.1.2272.1.4.10.1.1.66 |
rcPortExtCplimitUtilRate | 0 | 0 |
Threshold for Ingress traffic utilization rate of the port for extended CP-LIMIT |
| 1.3.6.1.4.1.2272.1.4.10.1.1.67 |
rcPortEgressRateLimit | 0 | 0 |
Egress Rate Limit. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.68 |
rcPortEgressRateLimitState | 0 | 0 |
Used to enable/disable shape/egress-rate-limit functionality. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.69 |
rcPortBpduFilteringTimerCount | 0 | 0 |
The remaining time the port will be disabled due to a BPDU received when BPDU filtering is enabled. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.70 |
rcPortBpduFilteringTimeout | 0 | 0 |
The time the port will be disabled when a BPDU is received when BPDU filtering is enabled. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.71 |
rcPortBpduFilteringAdminEnabled | 0 | 0 |
Used to enable/disable BPDU filtering. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.72 |
rcPortBpduFilteringOperEnabled | 0 | 0 |
Indicates whether BPDU filtering is actually enabled or disabled. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.73 |
rcPortQinqEtherType | 0 | 0 |
The qinq ether type value. It is hex value. It should be displayed and input as Hex value. It is only be used when port is associ… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.74 |
rcPortTrustDscp | 0 | 0 |
Used to enable/disable the trusted DSCP feature. If enabled, the internal qos-level and 802.1p value are derived from the receive… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.75 |
rcPortCpLimitEnable | 0 | 0 |
Used to enable/disable the control packet rate limit. Specifies whether or not rate limiting is currently in operation for multic… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.77 |
rcPortCpBroadcastLimit | 0 | 0 |
Used to limit Broadcast traffic on the specified port. Sets the limit in packets per second. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.78 |
rcPortSmartAutoNegotiate | 0 | 0 |
This object indicates whether 'smart' autonegotiation is enabled on a port (smart autonegotiation indicates that the port can sen… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.79 |
rcPortMepList | 0 | 0 |
List of Meps assigned to this entry. A mep is consist of <md>.<ma>.<mep_id>. Domain Name, Association and Mep Id is separated b… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.80 |
rcPortNumOfMep | 0 | 0 |
Used to indicate the number of Meps is assigned to this entry |
| 1.3.6.1.4.1.2272.1.4.10.1.1.81 |
rcPortAdacStatus | 0 | 0 |
If enabled, the Nortel IP phones connected to the port will be configured in the voice VLAN. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.82 |
rcPortPvid | 0 | 0 |
A port Vlan Id associates with ESM and RModule port for OEL2/MIM traffic |
| 1.3.6.1.4.1.2272.1.4.10.1.1.83 |
rcPortTdp | 0 | 0 |
This attribute allows to Enable/Disable Transparent Domain Protocol at the port level on the ESM and Power Ranger Card. For the T… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.84 |
rcPortClockSource | 0 | 0 |
Indicates this port's current WAN clock source. Valid for 10 GE WAN only |
| 1.3.6.1.4.1.2272.1.4.10.1.1.85 |
rcPortIngressRateLimit | 0 | 0 |
Limits the amount of traffic from this Ingress port. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.86 |
rcPortIngressRateLimitState | 0 | 0 |
Used to enable/disable police/ingress-rate-limit functionality. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.87 |
rcPortVrfIdList | 0 | 0 |
The set of VRF ids to which this port belongs. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.88 |
rcPortCfmVid | 0 | 0 |
CFM default port vid |
| 1.3.6.1.4.1.2272.1.4.10.1.1.89 |
rcPortUserLabel1 | 0 | 0 |
User provided field. Used to give extra management information/data |
| 1.3.6.1.4.1.2272.1.4.10.1.1.90 |
rcPortUserLabel2 | 0 | 0 |
User provided additional field. Used to give extra management information/data |
| 1.3.6.1.4.1.2272.1.4.10.1.1.91 |
rcPortClearCfmStats | 0 | 0 |
To clear the port counter |
| 1.3.6.1.4.1.2272.1.4.10.1.1.92 |
rcPortInterfaceType | 0 | 0 |
This value indicates whether a port is of type <normal/si lent/uni>. A port can be included in any EVPN service only if this at… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.93 |
rcPortCfmControlMep | 0 | 0 |
MEP assigned for CFM Control. A mep consists of <md>.<ma>.<mep_id>. Domain Name, Association and Mep Id is separated by '.' |
| 1.3.6.1.4.1.2272.1.4.10.1.1.94 |
rcPortMtu | 0 | 0 |
Port Mtu |
| 1.3.6.1.4.1.2272.1.4.10.1.1.95 |
rcPortMtuState | 0 | 0 |
Used to enable/disable Port Mtu functionality. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.96 |
rcPortVrfNameList | 0 | 0 |
The set of VRF names to which this port belongs. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.97 |
rcPortBrouterVrfId | 0 | 0 |
Gives the VRF Id for this Brouter port. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.98 |
rcPortBrouterVrfName | 0 | 0 |
Gives the VRF Name for this Brouter port. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.99 |
rcPortVrfCount | 0 | 0 |
The total number of VRFs this port is associated to. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.100 |
rcPortCtrlPktDropLimitEnable | 0 | 0 |
Used to enable/disable Control Packets Drop Rate Limiter functionality. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.101 |
rcPortCtrlPktDropLimit | 0 | 0 |
Indicates the Control Packet drop rate limit value |
| 1.3.6.1.4.1.2272.1.4.10.1.1.102 |
rcPortCtrlPktShutdownLimitEnable | 0 | 0 |
Used to enable/disable Control Packets Shutdown Rate Limiter functionality. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.103 |
rcPortCtrlPktShutdownLimit | 0 | 0 |
Indicates the Control Packet shutdown rate Limit value |
| 1.3.6.1.4.1.2272.1.4.10.1.1.104 |
rcPortCtrlPktShutdownRtExceeded | 0 | 0 |
Indicates if the Shutdown rate has been exceeded on the port |
| 1.3.6.1.4.1.2272.1.4.10.1.1.105 |
rcPortCtrlPktDropRtExceeded | 0 | 0 |
Indicates if the Drop rate has been exceeded on the port |
| 1.3.6.1.4.1.2272.1.4.10.1.1.106 |
rcPortDhcpOption82SubscriberId | 0 | 0 |
This object contains the DHCP option 82 subscriber ID string to be used in sub-option 6. If the value is an empty string, then s… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.107 |
rcPortServiceCardType | 0 | 0 |
|