The ID of the Repeater Chipset Hardware on the base unit. This is for
each Port Group (Repeater Chipset) in the unit.
Parsed from file Compaq-n3612.mib.txt
Company: compaq
Module: COMPAQ-CPQN3612-MIB
fsPgChipsetID OBJECT-TYPE SYNTAX INTEGER { nw1(1), nw2(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The ID of the Repeater Chipset Hardware on the base unit. This is for each Port Group (Repeater Chipset) in the unit." ::= { fsPgEntry 6 }
Vendor: Compaq
Module: COMPAQ-CPQN3612-MIB (Compaq-n3612.mib)
Type: TABULAR
Access: read-only
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232.101.1.1.12.1.1.1 | fsPgRptrId | 0 | 0 | Uniquely identifies a repeater in a system where a single agent manages multiple units constituting a concentrator. |
| 1.3.6.1.4.1.232.101.1.1.12.1.1.2 | fsPgUnitId | 0 | 0 | Uniquely identifies a unit within the repeater (stack) for which this entry contains information. |
| 1.3.6.1.4.1.232.101.1.1.12.1.1.3 | fsPgId | 0 | 0 | Uniquely identifies a 'Port Group' within a board for which this entry contains information. |
| 1.3.6.1.4.1.232.101.1.1.12.1.1.4 | fsPgBackplane | 0 | 0 | The backplane to which this 'Port Group' is assigned. Writing a value to this object changes the backplane assignment. When isol… |
| 1.3.6.1.4.1.232.101.1.1.12.1.1.5 | fsPgBackplaneType | 0 | 0 | The backplane type to which this Port Group is connected to. Writing a value to this object must coincide with a change to the b… |
| 1.3.6.1.4.1.232.101.1.1.12.1.1.7 | fsPgChipsetVersion | 0 | 0 | The revision of the Repeater Chipset Hardware on the base unit. This is for each Port Group (Repeater Chipset) in the unit. |
| 1.3.6.1.4.1.232.101.1.1.12.1.1.8 | fsPgReadableFrames | 0 | 0 | A representation of the total frames of valid frame length. This Counter is incremented by one for each frame whose OctetCount i… |
| 1.3.6.1.4.1.232.101.1.1.12.1.1.9 | fsPgReadableOctets | 0 | 0 | Increment Counter by OctetCount for each frame which which has been determined to be a readable frame. Note: The approximate min… |
| 1.3.6.1.4.1.232.101.1.1.12.1.1.10 | fsPgFCSErrors | 0 | 0 | Increment Counter by one for each frame with FCSError and without FramingError and whose OctetCount is greater than or equal to m… |
| 1.3.6.1.4.1.232.101.1.1.12.1.1.11 | fsPgAlignmentErrors | 0 | 0 | Increment Counter by one for each frame with FCSError and FramingError and whose octetCount is greater than or equal to minFrame… |
| 1.3.6.1.4.1.232.101.1.1.12.1.1.12 | fsPgFramesTooLong | 0 | 0 | Increment Counter by one for each frame whose OctetCount is greater than maxFrameSize |
| 1.3.6.1.4.1.232.101.1.1.12.1.1.13 | fsPgShortEvents | 0 | 0 | Increment Counter by one for each carrier event whose ActivityDuration is greater than ShortEventMinTime and less than ShortEven… |
| 1.3.6.1.4.1.232.101.1.1.12.1.1.14 | fsPgRunts | 0 | 0 | Increment Counter by one for each carrier event whose ActivityDuration is greater than ShortEventMaxTime and less than RuntMaxTi… |
| 1.3.6.1.4.1.232.101.1.1.12.1.1.15 | fsPgCollisions | 0 | 0 | Increment Counter by one for each carrier event in which the CIPresent(X) variable has the value SQE |
| 1.3.6.1.4.1.232.101.1.1.12.1.1.16 | fsPgLateEvents | 0 | 0 | Increment Counter by one for each carrier event in which the CollIn(X) variable transitions to the value SQE while the activity … |
| 1.3.6.1.4.1.232.101.1.1.12.1.1.17 | fsPgVeryLongEvents | 0 | 0 | The veryLongEvents object counts the number of times a packet has been received by this port that was so long that the repeater … |
| 1.3.6.1.4.1.232.101.1.1.12.1.1.18 | fsPgDataRateMismatches | 0 | 0 | The dataRateMismatches object counts the number of times that a packet has been received by this port with the transmission freq… |
| 1.3.6.1.4.1.232.101.1.1.12.1.1.19 | fsPgDroppedEvents | 0 | 0 | The dropped events object counts the number of times that a packet has been dropped by this port group due to internal constrain… |