Except when booting up, an agent will communicate over IP using a single
frame type defining the type of network that the IP traffic is running on:
Ethernet_II or IEEE 802.2_SNAP. When the agent is performing BOOTP/RARP, it
does not assume any frame type and will attempt to BOOTP/RARP over both
types. It will use the frame type that the first BOOTP/RARP response uses
for the rest of its communication. The frame type of the BOOTP/RARP
response will be stored by this object. For interfaces that do not have an
Ethernet frame type, e.g., the serial port, the frame type will always be
none(1). DURABLE
Parsed from file Compaq-Fp100.mib.txt
Company: compaq
Module: COMPAQ-FastPipes100-MIB
fp100IpFrameType OBJECT-TYPE SYNTAX INTEGER { not-supported(1), ethernet-ii(2), ieee-802-2-snap(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Except when booting up, an agent will communicate over IP using a single frame type defining the type of network that the IP traffic is running on: Ethernet_II or IEEE 802.2_SNAP. When the agent is performing BOOTP/RARP, it does not assume any frame type and will attempt to BOOTP/RARP over both types. It will use the frame type that the first BOOTP/RARP response uses for the rest of its communication. The frame type of the BOOTP/RARP response will be stored by this object. For interfaces that do not have an Ethernet frame type, e.g., the serial port, the frame type will always be none(1). DURABLE" ::= { fp100IpNetworkEntry 8 }
Vendor: Compaq
Module: COMPAQ-FastPipes100-MIB (Compaq-Fp100.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232.101.2.1.1.1.1.1 | fp100IpNetworkIface | 0 | 0 | Management agent interface number for which the IP network information is shown. Interfaces 1 through 6 correspond to the possib… |
| 1.3.6.1.4.1.232.101.2.1.1.1.1.2 | fp100IpBridgeGrpName | 0 | 0 | A descriptve text name for the Management Agent. DURABLE |
| 1.3.6.1.4.1.232.101.2.1.1.1.1.3 | fp100IpIfIndex | 0 | 0 | The value of the instance of the ifIndex object, defined in MIB-II, for this management agent interface. |
| 1.3.6.1.4.1.232.101.2.1.1.1.1.4 | fp100IpPhysAddr | 0 | 0 | The physical address of the management agent interface. This is equivalent to the MAC Address. For interfaces which do not have s… |
| 1.3.6.1.4.1.232.101.2.1.1.1.1.5 | fp100IpAddr | 0 | 0 | The IP Address of the Agent the Management Software is talking to. DURABLE |
| 1.3.6.1.4.1.232.101.2.1.1.1.1.6 | fp100IpNetMask | 0 | 0 | The IP Subnet Mask of the Agent the Management Software is talking to. DURABLE |
| 1.3.6.1.4.1.232.101.2.1.1.1.1.7 | fp100IpDfltRtr | 0 | 0 | The Address of the Gateway/Router on this interface. DURABLE |
| 1.3.6.1.4.1.232.101.2.1.1.1.1.9 | fp100IpAutoDiscoveryStatus | 0 | 0 | This object will allow a user to enable the unit to send out periodic ICMP Pings to ensure that the unit's IP Address is contain… |
| 1.3.6.1.4.1.232.101.2.1.1.1.1.10 | fp100IpPingPktRate | 0 | 0 | This object will determine the rate (in seconds) at which ICMP Pings will be sent out by the unit to ensure that its IP Address … |
| 1.3.6.1.4.1.232.101.2.1.1.1.1.11 | fp100WriteNVRAM | 0 | 0 | The IP Network Parameters (IP Address, Net Mask, Gateway, and IP frame type) for this interface in the agent can be changed usin… |